2000 LEXUS GS400 battery

I04139
65 56
I04140
1 221
I04141
43 34
BE±134
± BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
2435 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
16. Front right side door:
INSPECT DOOR LOCK MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
5 and the negative (±) lead to terminal 6, and check that
the door lock link moves to UNLOCK position.
(b) Reverse the polarity and check that the door lock link
moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
17. Front right side door:
INSPECT DOOR LOCK MOTOR CIRCUIT
(See page DI±900)
18. Rear left side door:
INSPECT DOOR LOCK MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (±) lead to terminal 2, and check that
the door lock link moves to UNLOCK position.
(b) Reverse the polarity and check that the door lock link
moves to LOCK position.
If operation is not as specified, replace the door lock assembly.
19. Rear left side door:
INSPECT DOOR LOCK MOTOR CIRCUIT
(See page DI±930)
20. Rear right side door:
INSPECT DOOR LOCK MOTOR OPERATION
(a) Connect the positive (+) lead from the battery to terminal
3 and the negative (±) lead to terminal 4, and check that
the door lock link moves to UNLOCK position.
(b) Reverse the polarity and check that the door lock link
moves to LOCK position.
If operation is not as specified, replace the door lock assembly.

I04142
21
UNLOCK
I04275
21
LOCK
I04143
5 6
UNLOCK
I04276
5 6
LOCK
± BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
BE±135
2436 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
21. Rear right side door:
INSPECT DOOR LOCK MOTOR CIRCUIT
(See page DI±947)
22. Front left side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter)
(a) Connect the negative (±) lead from the battery to terminal
2.
(b) Connect the positive (+) lead from the ammeter to termi-
nal 1 and the negative (±) lead to battery negative (±) ter-
minal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 2 and the negative (±)
lead to terminal 1, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
23. Front right side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter)
(a) Connect the negative (±) lead from the battery to terminal
6.
(b) Connect the positive (+) lead from the ammeter to termi-
nal 5 and the negative (±) lead to battery negative (±) ter-
minal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 6 and the negative (±)
lead to terminal 5, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.

I05179
21
UNLOCK
I05180
21
LOCK
I05181
43
UNLOCK
I05182
43
LOCK
I04279
21
UNLOCK BE±136
± BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
2437 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
24. Rear left side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter)
(a) Connect the negative (±) lead from the battery to terminal
2.
(b) Connect the positive (+) lead from the ammeter to termi-
nal 1 and the negative (±) lead to battery negative (±) ter-
minal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 2 and the negative (±)
lead to terminal 1, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
25. Rear right side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter)
(a) Connect the negative (±) lead from the battery to terminal
4.
(b) Connect the positive (+) lead from the ammeter to termi-
nal 3 and the negative (±) lead to battery negative (±) ter-
minal, and check that the current changes from approxi-
mately 3.2 A to less than 0.5 A within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, connect the positive (+)
lead from the battery to terminal 4 and the negative (±)
lead to terminal 3, and check that the door lock moves to
the LOCK position.
If operation is not as specified, replace the door lock assembly.
26. Front left side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter with a current±measuring probe)
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (±) lead to terminal 2.
(b) Attach a current±measuring probe to either the positive
(+) lead or the negative (±) lead, and check that the cur-
rent changes from approximately 3.2 A to less than 0.5 A
within 20 to 70 seconds.

I04275
21
LOCK
I04280
5 6
UNLOCK
I04276
5 6
LOCK
I05178
21
UNLOCK
I05175
21
LOCK
± BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
BE±137
2438 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, reverse the polarity, and
check that the door lock moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.
27. Front right side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter with a current±measuring probe)
(a) Connect the positive (+) lead from the battery to terminal
5 and the negative (±) lead to terminal 6.
(b) Attach a current±measuring probe to either the positive
(+) lead or the negative (±) lead, and check that the cur-
rent changes from approximately 3.2 A to less than 0.5 A
within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, reverse the polarity, and
check that the door lock moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.
28. Rear left side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter with a current±measuring probe)
(a) Connect the positive (+) lead from the battery to terminal
1 and the negative (±) lead to terminal 2.
(b) Attach a current±measuring probe to either the positive
(+) lead or the negative (±) lead, and check that the cur-
rent changes from approximately 3.2 A to less than 0.5 A
within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, reverse the polarity, and
check that the door lock moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.

I05176
43
UNLOCK
I05177
43
LOCK
I04020
BE±138
± BODY ELECTRICALPOWER DOOR LOCK CONTROL SYSTEM
2439 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
29. Rear right side door:
INSPECT PTC THERMISTOR OPERATION (Using an
ammeter with a current±measuring probe)
(a) Connect the positive (+) lead from the battery to terminal
3 and the negative (±) lead to terminal 4.
(b) Attach a current±measuring probe to either the positive
(+) lead or the negative (±) lead, and check that the cur-
rent changes from approximately 3.2 A to less than 0.5 A
within 20 to 70 seconds.
(c) Disconnect the leads from terminals.
(d) Approximately 60 seconds later, reverse the polarity, and
check that the door lock moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.
30. INSPECT LUGGAGE COMPARTMENT DOOR OPEN-
ER MOTOR OPERATION
Connect positive (+) lead to the terminal 1 and negative (±) lead
to the opener motor body, and check that the motor operates.
31. INSPECT LUGGAGE COMPARTMENT DOOR OPEN-
ER MOTOR CIRCUIT
(See page DI±802)

DI3CO±10
± BODY ELECTRICALTHEFT DETERRENT SYSTEM
BE±141
2442 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
PRE±CHECK
1. THEFT DETERRENT SYSTEM
When the system is set to the theft deterrent mode and any of
the following conditions are met, the system sounds the horns
and flashes the headlights and the taillights for approx. 1 min-
ute.
At the same time the system locks all doors (If all door are not
locked at once, the system repeats door locking operation ev-
ery 0.55 seconds during the one minute alarm time).
There are 2 modes in this system, which are active mode and
passive mode.
All initial setting are performed in active mode. It can be
switched to passive mode by specified operation. (See step 4.
CHANGING METHOD OF PASSIVE MODE)
Condition:
Any of the doors (Including the engine hood and luggage
compartment door) is unlocked or opened without the
key. *1
The battery terminal is disconnected and reconnected.
The system receives panic signal from remote keyless
entry. *2
*1: Only active arming mode.
*2: When the ignition key is not inserted in the key cylin-
der.
There are 4 conditions in this system which are disarming
condition, disarming preparation condition, arming condition
and alarming condition.
(a) Disarming condition:
(1) When a user is near the vehicle.
(2) When the alarming function does not operate.
(3) When theft deterrent function is not performed.
(b) Disarming preparation condition:
(1) Time from a user locks a door to be leaves the ve-
hicle.
(2) Time until transferring to disarming condition.
(3) Theft deterrent function is not performed.
(c) Arming condition:
(1) When a user leaves the vehicle completely.
(2) When theft deterrent function is possible.

Disarming condition
Any of the following conditions is met

When all doors and engine hood are closed, lock all the doors using a key.

When all doors and engine hood are closed, lock all the doors using wireless remote function.

When all doors and engine hood are closed, open and close either of doors and engine hood
then close and lock all doors and engine hood.
Disarming preparation condition
Any of the following conditions is met

30 seconds elapse when the engine hood
is closed and all doors are locked.
Any of the following conditions is met

Close and open either of all doors and
engine hood.

Lock and unlock either of doors.

Insert a key into the ignition key cylinder.

Reconnect the battery.
Arming condition
Any of the following conditions is met

Unlock the locked doors using the wireless
remote function.

Unlock the locked doors using the key.

Insert the key into the ignition key cylinder
and turn the ignition key ON.
Any of the following conditions is met

Either of closed doors opens.

Either of locked doors is unlocked by any
operation other than key or wireless remote
function.

The closed engine hood is opened.

The battery is reconnected.
Alarming condition
Any of the following conditions is met

Unlock the locked doors using the wireless
remote function.

Unlock the locked doors using the key.

Insert the key into the ignition key cylinder
and turn the ignition key ON.
In this mode, once theft is detected, it is
informed using light and sound to people
around the vehicle.
The alarming time described above passes.
(Key not inserted in ignition cylinder.)
± BODY ELECTRICALTHEFT DETERRENT SYSTEM
BE±143
2444 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
2. ACTIVE ARMING MODE

Disarming condition (A)
Disarming preparation condition
Any of the following
conditions is met

With all doors and
engine hood closed
30 seconds elapse.
Arming condition
Any of the following conditions is met
(Refer to HINT * on the next page)

Press unlock switch of the wireless.

Insert the key into the driver and passenger
doors key cylinders, turn the key to unlock.

Insert the key into the ignition key cylinder
and turn the key to ON.
Any of the following conditions is met

Either of closed door is opened and entry
delay time elapses. (Refer to HINT on the
next page)

Engine hood is closed and opened.

Battery is reconnected.
Alarming condition
In this mode, once theft is detected, it is
informed using light and sound to people
around the vehicle.
The alarming time described above passes.
Any of the following conditions is met

Pull the key out of the ignition key cylinder which the key was inserted in.
Disarming condition (B)
Any of the following conditions is met

Press the unlock button of wireless.

Insert the key into the key cylinder of driver
or passenger seat and turn the key to unlock.

Insert the key into the ignition key cylinder.

Reconnect the battery.
Any of the following conditions is met

Open and close either of all doors and
engine hood.
Any of the following conditions is
met

Close and open either of
all doors and engine hood.Any of the following conditions is met

Press the unlock button of wireless.

Insert the key into the key cylinder of driver
or passenger seat and turn the key to unlock.

Insert the key into the ignition key cylinder.

Reconnect the battery.
Any of the following conditions is met

Press unlock switch of the wireless.

Insert the key into the driver and passenger
doors key cylinders, turn the key to unlock.

Insert the key into the ignition key cylinder
and turn the key to ON.
± BODY ELECTRICALTHEFT DETERRENT SYSTEM
BE±145
2446 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)