2000 LEXUS GS400 brake rotor

SA0R7±05
R05806
R11093
SST
R11078
SST SA±12
± SUSPENSION AND AXLEFRONT AXLE HUB
2012 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
DISASSEMBLY
1. REMOVE FRONT HUB GREASE CAP
Using a screwdriver, remove the grease cap from the steering
knuckle.
2. REMOVE FRONT AXLE HUB LOCK NUT AND ABS
SPEED SENSOR ROTOR
(a) Clamp the axle hub in a soft jaw vise.
HINT:
Close vise until it holds hub bolt. Do not tighten further.
(b) Using a chisel and hammer, loosen the staked part of the
lock nut.
(c) Using a 36 mm socket wrench, remove the lock nut.
(d) Remove the ABS speed sensor rotor.
NOTICE:
Take care not to scratch the serrations of the sensor rotor.
3. REMOVE AXLE HUB FROM STEERING KNUCKLE
(a) Remove the 4 bolts and shift the brake dust cover toward
the outside.
(b) Using SST, remove the axle hub from the steering
knuckle.
SST 09950±40011 (09951±04020, 09952±04010,
09953±04020, 09954±04010, 09955±04051,
09957±04010, 09958±04011)
4. REMOVE INNER RACE (OUTSIDE) FROM AXLE HUB
Using SST, remove the inner race from the axle hub.
SST 09950±40011 (09951±04020, 09952±04010,
09953±04020, 09954±04010, 09955±04061,
09957±04010, 09958±04011)

SA0R8±01
W00274
SST
SST
R06214
SST
R08018
SST
SST SA±14
± SUSPENSION AND AXLEFRONT AXLE HUB
2014 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
REASSEMBLY
1. INSTALL BEARING
(a) Using SST and a press, install a new bearing to steering
knuckle.
SST 09309±36010, 09950±60020 (09951±00720),
09950±70010 (09951±07150)
NOTICE:
If the inner race and balls come loose from the bearing out-
er race, make sure to install them on the same side as be-
fore.
(b) Using snap ring pliers, install a new snap ring.
2. INSTALL OIL SEAL
(a) Install the inner race (outside).
(b) Using SST and a hammer, install a new oil seal until it is
flush with the end surface of the steering knuckle.
SST 09608±32010
(c) Coat MP grease to the oil seal lip.
3. INSTALL AXLE HUB TO STEERING KNUCKLE
(a) Install the brake dust cover to the steering knuckle with
the 4 bolts.
Torque: 8.3 N´m (85 kgf´cm, 74 in.´lbf)
(b) Using SST and a press, install the axle hub to the steering
knuckle.
SST 09316±60011 (09316±00011, 09316±00071),
09608±32010
4. INSTALL ABS SPEED SENSOR ROTOR
NOTICE:
Do not scratch the serrations of the sensor rotor.
5. INSTALL AXLE HUB LOCK NUT
(a) Install a new axle hub lock nut.
Torque: 199 N´m (2,030 kgf´cm, 147 ft´lbf)
(b) Using a chisel and hammer, stake the lock nut.
6. INSTALL FRONT HUB GREASE CAP
Using a screwdriver and hammer, install the grease cap to the
steering knuckle.

SA0R5±03
F02340
Clip
Brake Caliper
ABS Speed Sensor
Hub Bolt
Disc
Steering Knuckle
Grease Cap
ABS Speed
Sensor Rotor
Snap Ring

Oil Seal
Brake Dust Cover
Axle Hub

Bearing

O±Ring
87 (890, 64)
118 (1,200, 87)
7.8 (80, 69 in.´lbf)
113 (1,150, 83)199 (2,030, 147)
8.3 (85, 74 in.´lbf)



Non±reusable part: Specified torque
N´m (kgf´cm, ft´lbf)
± SUSPENSION AND AXLEFRONT AXLE HUB
SA±9
2009 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
FRONT AXLE HUB
COMPONENTS