2000 LEXUS GS400 lock

V08418
Turn ignition Key from LOCK position to ACC position.
Troubleshooting for ANTI±THEFT SYSTEM
Display A:
ID Number is set.Display E:
ANTI±THEFT SYSTEM opera-
tion condition. (ID number input
error 10 times or more.)Display B
ºSECº display disappears after 1
second.Radio switch ON.
Take to designated radio
service station.Display BDisplay D
Refer to each
malfunction item.Normal
operation.
Radio switch ON. Normal operation.
Cancel ID number, refer to each malfunction item.
Ye s
No
OK
NG
ANTI±THEFT SYSTEM operation condition. (ID number input error 9 times or less.)
Input ID number to cancel ANTI±THEFT SYSTEM, and check display.
Display A"B Display B Display E
Display C"A
Radio switch ON.Refer to each
malfunction item.Take to designated
radio service station.ANTI±THEFT SYSTEM not can-
celled. (ID number input error 10
times or less.)
Display D
ANTI±THEFT SYSTEM cancelled.
Check audio system again.Normal operation.
OK
NG
Cancel ID number, refer to each malfunction item.
Liquid Crystal Display (LCD) or VFD for Audio System
Display ºAº Display ºBº Display ºCº
Display ºDº Example:Display ºEº
2 DIN Type
1 DIN TypeBlank
No Illumination
2 DIN Type
1 DIN Type 2 DIN Type
1 DIN Type Error Times2 DIN Type 1 DIN Type
Radio Display
1 DIN Type 2 DIN Type
HINT:

Refer to Owner's Manual for operation details of ANTI±THEFT SYSTEM.

When the ID number has been cancelled, reset the same number after completing the operation, or
inform the customer that it has been cancelled.
± BODY ELECTRICALAUDIO SYSTEM
BE±197
2498 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)

BE04S±04
I05031
± BODY ELECTRICALPOWER SOURCE
BE±21
2322 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
INSPECTION
1. INSPECT ENGINE ROOM NO.1 JUNCTION BLOCK
CIRCUIT
(a) Remove the fuse from the junction block and inspect the
connector on junction block side.
Fuse Tester connectionConditionSpecified condition
MAIN 2 ± GroundConstantBattery positive voltage
ABS NO.1 4 ± GroundConstantBattery positive voltage
ALT 6 ± GroundConstantBattery positive voltage
ABS 8 ± GroundConstantBattery positive voltage
H±LP CLN 10 ± GroundConstantBattery positive voltage
RAD NO.1 12 ± GroundConstantBattery positive voltage
ALT±S 14 ± GroundConstantBattery positive voltage
EFI 16 ± GroundConstantBattery positive voltage
TURN HAZ 18 ± GroundConstantBattery positive voltage
TEL 20 ± GroundConstantBattery positive voltage
AM2 22 ± GroundConstantBattery positive voltage
ETCS 24 ± GroundConstantBattery positive voltage
HORN 26 ± GroundConstantBattery positive voltage
MPX±B 27 ± GroundConstantBattery positive voltage

BE±22
± BODY ELECTRICALPOWER SOURCE
2323 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) ECU±B1 30 ± Ground
ConstantBattery positive voltage
HTR 31 ± GroundConstantBattery positive voltage
FAN MAIN 33 ± GroundConstantBattery positive voltage
CDS FAN 35 ± GroundIgnition switch ONBattery positive voltage
RAD FAN 35 ± GroundIgnition switch ONBattery positive voltage
H±LP R LWR 38 ± GroundLight control switch HEADBattery positive voltage
H±LP L LWR 38 ± GroundLight control switch HEADBattery positive voltage
H±LP R UPR 38 ± GroundLight control switch HEADBattery positive voltage
H±LP L UPR 42 ± GroundLight control switch HEADBattery positive voltage
If the circuit is not as specified, inspect the circuits connected
to other parts.
(b) Remove the relay from the junction block and inspect the
connector on junction block side.
Relay Tester connectionConditionSpecified condition
H±LP 44 ± GroundConstantBattery positive voltage
H±LP 46 ± GroundConstantBattery positive voltage
ST 48 ± GroundConstantContinuity
ST 51 ± GroundConstantBattery positive voltage
EFI MAIN 53 ± GroundConstantContinuity
EFI MAIN 55 ± GroundConstantBattery positive voltage
If the circuit is not as specified, inspect the circuits connected
to other parts.

I05032
± BODY ELECTRICALPOWER SOURCE
BE±23
2324 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
2. INSPECT ENGINE ROOM No.3 RELAY BLOCK CIR-
CUIT
Remove the relay from the relay block and inspect the connec-
tor on relay block side.
Fuse Tester connectionConditionSpecified condition
FAN NO.1 3 ± GroundIgnition switch ONBattery positive voltage
FAN NO.2 8 ± GroundIgnition switch ONBattery positive voltage
A/C COMP 13 ± GroundIgnition switch ONBattery positive voltage
FAN NO.3 17 ± GroundIgnition switch ONBattery positive voltage
DIMMER 20 ± GroundConstantBattery positive voltage
If the circuit is not as specified, inspect the circuits connected
to other parts.

I05033
BE±24
± BODY ELECTRICALPOWER SOURCE
2325 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
3. INSPECT ENGINE ROOM No.2 RELAY BLOCK CIR-
CUIT
Remove the relay from the relay block and inspect the connec-
tor on relay block side.
Relay Tester connectionConditionSpecified condition
HORN 1 ± GroundConstantBattery positive voltage
HORN 2 ± GroundHorn switch ONContinuity
HORN 4 ± GroundConstantBattery positive voltage
ABS SOL 5 ± GroundConstantBattery positive voltage
ABS SOL 6 ± GroundConstantContinuity
TRC MTR 11 ± GroundConstantBattery positive voltage
ABS MTR 15 ± GroundConstantBattery positive voltage
If the circuit is not as specified, inspect the circuits connected
to other parts.

I05034
± BODY ELECTRICALPOWER SOURCE
BE±25
2326 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
4. INSPECT DRIVER SIDE JUNCTION BLOCK CIRCUIT

BE±26
± BODY ELECTRICALPOWER SOURCE
2327 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(a) Remove the fuse from the junction block and inspect the
connector on junction block side.
Fuse Tester connectionConditionSpecified condition
AM1 1 ± GroundConstantBattery positive voltage
WASHER 3 ± GroundIgnition switch ONBattery positive voltage
FOG 5 ± GroundConstantBattery positive voltage
TAIL 7 ± GroundLight control switch TAIL or HEADBattery positive voltage
SRS±ACC 9 ± GroundIgnition switch ACC or ONBattery positive voltage
GAUGE 11 ± GroundIgnition switch ONBattery positive voltage
FUEL OPN 13 ± GroundConstantBattery positive voltage
D FR DOOR 15 ± GroundConstantBattery positive voltage
PANEL 17 ± GroundLight control switch TAIL or HEADBattery positive voltage
HTR 19 ± GroundIgnition switch ONBattery positive voltage
SRS±B 21 ± GroundConstantBattery positive voltage
P/SEAT (D) 23 ± GroundConstantBattery positive voltage
RAD NO.2 25 ± GroundIgnition switch ACC or ONBattery positive voltage
WIP 27 ± GroundIgnition switch ONBattery positive voltage
OBD 29 ± GroundConstantBattery positive voltage
STOP 31 ± GroundConstantBattery positive voltage
CIG 33 ± GroundIgnition switch ACC or ONBattery positive voltage
ECU±IG 35 ± GroundIgnition switch ONBattery positive voltage
ST 37 ± GroundIgnition switch ONBattery positive voltage
IGN 39 ± GroundIgnition switch ONBattery positive voltage
D RR DOOR 41 ± GroundConstantBattery positive voltage
If the circuit is not as specified, inspect the circuits connected
to other parts.
(b) Remove the relay from the junction block and inspect the
connector on junction block side.
Relay Tester connectionConditionSpecified condition
Fog light 43 ± GroundConstantBattery positive voltage
Fog light 44 ± GroundConstantContinuity
Fog light 46 ± GroundLight control switch HEADBattery positive voltage
Taillight 47 ± GroundConstantBattery positive voltage
Taillight 48 ± GroundConstantContinuity
Taillight 50 ± GroundConstantContinuity
If the circuit is not as specified, inspect the circuits connected
to other parts.

I05036
± BODY ELECTRICALPOWER SOURCE
BE±27
2328 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
5. INSPECT PASSENGER SIDE JUNCTION BLOCK CIR-
CUIT