Page 170 of 259
Downloaded from www.Manualslib.com manuals search engine 167
INJECTION
Component (diagr.) Supplier Reference Observations
Air filter5PSA 7895
Air flowmeter4SIEMENS
Turbocompressor3ALLIED
SIGNAL
Inlet manifold pressure sensor76NIPPON
DENSEN
Air/air heat exchanger74
EGR exhaust gas recycling valve14PIERBURG Shim reference: violet
Turbo valve adjustment
control capsule13Integral with the turbocompressor
EGR recycling regulation
electrovalve12BOSCH
Turbo pressure regulation
electrovalve11BOSCH
Catalytic converter6
Vacuum pump48PIERBURG
EGR butterfly housing73
Butterfly housing electrovalve 75BOSCH
«SWIRL» electrovalve70EATON
«SWIRL» control diaphragm71MECAPLAST
EGR exhaust gas/coolant exchanger16Air circuit
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Page 171 of 259
Downloaded from www.Manualslib.com manuals search engine 168
INJECTION
FEATURES OF BOSCH HDi DIRECT INJECTION SYSTEM
Particle filter circuit
Component (diagr.) Supplier Reference Observations
WIMETAL
Particle filter7
TR PSA F002
Catalyser downstream temperature sensor8
Differential pressure sensor9KAVLICO
Catalyser upstream temperature sensor10
Additive ECU38MARWAL
Additive reservoir39
Additive minimum level sensor40
Additive injection pump41MARWAL
Cap (too full)47
Additive injector43MARWAL
Safety valve48
Inlet air heater butterfly72
Page 186 of 259
Downloaded from www.Manualslib.com manuals search engine 183
CLUTCH
GEARBOX
DRIVESHAFTS
BE4/5 GEARBOX CONTROLS
Engines : 6FZ - RFN - RLZ - RHY
Adjustments (continued)
Under the bonnet.
- Remove the air filter assembly.
- Unlock the gear engagement cable ball-joint(b).
- Unlock the gear selection cable ball-joint(c).
- Make sure the gear levers (engagement and selection)are in neutral position.
- Lock the cable lengths with the ball-joint locking keys.
- Remove the tool [1].
Checks.
- Remove the tool[1].
- Check that all the gears engage without «tightness».
- Check that the gear lever moves identically forwards and backwards and to right and left. If not :
- Repeat the adjustment.
- Refit the console and the air filter assembly.
B2CP3E8CB2CP3E9C
Page 195 of 259
Downloaded from www.Manualslib.com manuals search engine 192
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX CONTROLS
Engines : XFX – RHZ – 4HX
Adjustments (continued)
Under the bonnet.
- Remove the air filter assembly.
- Unlock the gear engagement and selection cable ball-joint(b).
- Make sure the gear levers (engagement and selection) are in neutral position.
- Lock the cable lengths with the ball-joint locking keys.
- Remove the tool [1].
Checks.
- Remove the tool [1].
- Check that all the gears engage without «tightness».
- Check that the gear lever moves identically forwards and backwards and to right and left. If not :
- Repeat the adjustment.
- Refit the console and the air filter assembly.
B2CP3EBC
Page 249 of 259
Downloaded from www.Manualslib.com manuals search engine C5FPOC5CC5FPOC6D
AIR
CONDITIONING
SPECIAL FEATURES : AIR CONDITIONING SYSTEM (R 134.a)
Pollen filter
Remove :
- The trim(1) under the dashboard (driver’s side).
- The cover (2).
- Unclip at «a» and pull out the pollen filter (3).
- Remove the pollen filter(3).
246
Page:
< prev 1-8 9-16 17-24