Page 108 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
105
COOLING SYSTEM SPECIFICATIONS
Engine : XFX
(1)Heater matrix
(2)Venting chamber
(3) Thermostat.
(4) Coolant outlet housing
(5) Coolant inlet housing
(6) Engine cooling radiator
(7) Venting chamber
(8) Bleed screw
(9) Water / oil exchanger
(10) Thermostat
(11) Thermostat(Coolant outlet housing)
(12) Thermal switch
(10). (11)and (12): Tightening 1.7 ± 0.4 m.daN
B1GP041P
Page 109 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
106
COOLING SYSTEM SPECIFICATIONS
Engines : RHY-RHZ
(1) Venting chamber
(2) Heater matrix
(3) Coolant inlet housing
(4)Exhaust gas / coolant heat exchanger
(5)Bleed screw
(6)Cylinder block drain plug
(7) Coolant outlet housing
(8) Additional heating (Option or according to version)
(9) Radiator
(10) Coolant / oil heat exchanger
B1GP08EP
Page 110 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
107
COOLING SYSTEM SPECIFICATIONS
Engine : 4HX
(10)Heater matrix
(2) Coolant inlet housing.
(3) Exhaust gas / coolant heat exchanger
(4) Bleed screw
(5)Coolant outlet housing.
(6)Additional heating (Option or according to version)
(7) Radiator
(8)Air / coolant heat exchanger
(9) Coolant / oil heat exchanger
(10) Venting chamber
B1GP08HP
Page 129 of 259
Downloaded from www.Manualslib.com manuals search engine 126
INJECTION
AIR SUPPLY CIRCUIT SPECIFICATION
Engine : RHY
(1) Air filterPSA 7899.
(2) FlowmeterSIEMENS
(3)Water / recycled gas exchangerVALEO
(4) E.G.R. valvePURFLUX
(5) Turbocharger KKK K03
(6) Air butterflyMAGNETI MARELLI
48W7 Ref. 648
B1HP1A6D
Page 130 of 259
Downloaded from www.Manualslib.com manuals search engine 127
INJECTION
(7) Air / air heat exchanger VALEO.
(8) Turbocharger KKK K03.
(9)EGR valvePURFLUX.
(10)Air butterflyMAGNETI MARELLI
48W7 Ref. 648.
(11)Air filter PSA 7899.
(12) Turbocharging pressure sensorNIPPON DENSO.
AIR SUPPLY CIRCUIT SPECIFICATION
Engine : RHZ
B1HP1A7P
Page 131 of 259
Downloaded from www.Manualslib.com manuals search engine 128
INJECTION
AIR SUPPLY CIRCUIT SPECIFICATION
Engine : 4HX
(1) Air / air exchanger
(2) Air / water exchanger
(3) Warm air metering device BOSCH.
(4) Cold air metering deviceBOSCH.
(5) Turbocharger ALLIEDSIGNAL GT1549P.
(6) FlowmeterSIEMENS.
(7) Air filter PSA 7885.
B1HP1BYP
Page 135 of 259
Downloaded from www.Manualslib.com manuals search engine 132
INJECTION
CHECKS : EXHAUST GASES RECYCLING CIRCUIT
Engines : RHZ – RHY
EGR valve
- Connect tool [1]on the EGR valve capsule take-off (2).
- Apply a vacuum of approx.0,6 barto activate the EGRvalve.
- In abruptly suppressing the vacuum, the valve should click and lock itself back on its seating.
- Repeat the operation several times.
Butterfly housing
- Remove the air duct between the air/air exchanger and the butterfly housing (5),(1).
- Connect tool[1]on the butterfly housing vacuum capsule (1).
- Apply a vacuum of approx. 0,8 bar, the flap (a)of the butterfly housing(1)should be closed.
B1HP1BWCB1BP2ADC
Page 137 of 259
Downloaded from www.Manualslib.com manuals search engine 134
INJECTION
CHECKS : EXHAUST GASES RECYCLING CIRCUIT
Engine : 4HX
EGR valve
- Connect tool[1]on the take-off (a)of the EGR valve capsule (2).
- Apply a vacuum of approx. 0,6 barto activate the EGRvalve.
- In abruptly suppressing the vacuum, the valve should click and lock itself back on its seating.
- Repeat the operation several times.
Butterfly housing
- Remove the air duct between the air/air exchanger and the butterfly housing (1).
- Disconnect the tube (white marking)on the electrovalve (4)(black connector).
- Connect tool[1]on the tube with the white marking.
- Apply a vacuum of approx. 0,8 bar, the flap (b)of the butterfly housing (1) should be closed.
B1BP29NCB1BP29PC