Page 39 of 349

IN044–07
IN–34
– INTRODUCTIONTERMS
TERMS
ABBREVIATIONS USED IN THIS MANUAL
AbbreviationsMeaning
ABSAnti–Lock Brake System
A/CAir Conditioner
ACAlternating Current
ACCAccessory
ACISAcoustic Control Induction System
ACSDAutomatic Cold Start Device
A.D.D.Automatic Disconnecting Differential
AHCActive Height Control Suspension
ALRAutomatic Locking Retractor
ALTAlternator
AMPAmplifier
ANTAntenna
APPROX.Approximately
A/TAutomatic Transmission (Transaxle)
AT FAutomatic Transmission Fluid
AUTOAutomatic
BACSBoost Altitude Compensation System
BATBattery
B/LBi–Level
BVSVBimetallic Vacuum Switching Valve
CBCircuit Breaker
CDCompact Disc
CHChannel
CKDComplete Knock Down
COMB.Combination
CPECoupe
CRSChild Restraint System
CTRCenter
DCDirect Current
DIFF.Differential
DIFF. LOCKDifferential Lock
DLCData Link Connector
DSPDigital Signal Processor
DTCDiagnostic Trouble Code
ECTElectronic Control Transmission
ECUElectronic Control Unit
EDUElectronic Driving Unit
EFIElectronic Fuel Injection
E/GEngine
EGRExhaust Gas Recirculation
ELREmergency Locking Retractor
E–VRVElectronic Vacuum Regulating Valve
Page 40 of 349

– INTRODUCTIONTERMS
IN–35
FFFront–Engine Front–Wheel–Drive
FIPGFormed In Place Gasket
FLFusible Link
FrFront
FRFront–Engine Rear–Wheel–Drive
FWDFront–Wheel–Drive
GNDGround
H/BHatchback
HIHigh
HIDHigh Intensity Discharge (Head Lamp)
HTHard Top
HWSHeated Windshield System
IACIdle Air Control
IFSIndependent Front Suspension
IGIgnition
INTIntermittent
I/PInstrument Panel
IRSIndependent Rear Suspension
J/BJunction Block
J/CJunction Connector
LANLocal Area Network
LBLiftback
LCDLiquid Crystal Display
LEDLight Emitting Diode
LHLeft–Hand
LHDLeft–Hand Drive
LOLow
LSDLimited Slip Differential
LSP & PVLoad Sensing Proportioning And Bypass Valve
LSPVLoad Sensing Proportioning Valve
MAPManifold Absolute Pressure
MAX.Maximum
MICMicrophone
MILMalfunction Indicator Lamp
MIN.Minimum
MPMultipurpose
MPIMultipoint Electronic Fuel Injection
MPXMultiplex Communication System
M/TManual Transmission
NNeutral
No.Number
O2SOxygen Sensor
O/DOverdrive
OPTOption
P & BVProportioning And Bypass Valve
PCSPower Control System
Page 41 of 349
IN–36
– INTRODUCTIONTERMS
PKB
Parking Brake
PPSProgressive Power Steering
PSPower Steering
PTOPower Take–Off
RAMRandom Access Memory
R/BRelay Block
RBSRecirculating Ball Type Steering
R/FReinforcement
RFSRigid Front Suspension
RHRight–Hand
RHDRight–Hand Drive
RLYRelay
ROMRead Only Memory
RrRear
RRRear–Engine Rear–Wheel Drive
RRSRigid Rear Suspension
RWDRear–Wheel Drive
SDNSedan
SENSensor
SICSStarting Injection Control System
SPECSpecification
SRSSupplemental Restraint System
SSMSpecial Service Materials
SSTSpecial Service Tools
STDStandard
SWSwitch
SYSSystem
T/ATransaxle
TACHTachometer
TDCTop Dead Center
TEMP.Temperature
TEMSTOYOTA Electronic Modulated Suspension
TFTToyota Free–Tronic
T/MTransmission
TMCTOYOTA Motor Corporation
TRCTraction Control System
U/DUnderdrive
VENTVentilator
VINVehicle Identification Number
VSCVehicle Skid Control Vehicle Stability Control
VSVVacuum Switching Valve
w/With
WGNWagon
W/HWire Harness
w/oWithout
1stFirst
Page 45 of 349
PP27T–01
– PREPARATIONMANUAL TRANSAXLE (E251)
PP–1
MANUAL TRANSAXLE (E251)
SST (Special Service Tools)
09223–15020Oil Seal & Bearing ReplacerDifferential case oil seal
09308–00010Oil Seal PullerOutput shaft front bearing outer
race
09316–20011Transfer Bearing ReplacerDifferential case tapered roller
bearing
09316–60011Transmission & Transfer Bearing
Replacer
(09316–00011)Replacer Pipe
(09316–00021)Replacer ”A”
(09316–00041)Replacer ”C”1st gear
No.1 hub sleeve
Differential case tapered roller
bearing outer race
(09316–00071)Replacer ”F”Output shaft front bearing
09506–30012Differential Drive Pinion Rear
Bearing Cone ReplacerOutput shaft rear bearing
09506–35010Differential Drive Pinion Rear
Bearing ReplacerNo.2 hub sleeve
3rd gear
Input shaft rear bearing
1st gear bearing inner race
09608–00081Differential Side Bearing Cone
ReplacerInput shaft oil seal
09612–65014Steering Worm Bearing PullerInput shaft bearing
Differential case tapered roller
bearing outer race
Page 50 of 349
PP27U–01
PP–6
– PREPARATIONSUSPENSION AND AXLE
SUSPENSION AND AXLE
SST (Special Service Tools)
09240–00020Wire Gauge Set
09316–60011Transmission & Transfer Bearing
Replacer
(09316–00041)Replacer ”C”
09520–01010Drive Shaft Remover Attachment
09520–24010Differential Side Gear Shaft
Puller
(09520–32040)Shocker Set
09521–24010Drive Shaft Boot Clamping Tool
09608–16042Front Hub Bearing Adjusting Tool
(09608–02021)Bolt & Nut
(09608–02041)Retainer
09710–30021Suspension Bushing Tool Set
(09710–03121)Bushing Remover Base
Page 77 of 349

SS0G7–04
– SERVICE SPECIFICATIONSMANUAL TRANSAXLE (E251)
SS–7
TORQUE SPECIFICATION
Part tightenedN·mkgf·cmft·lbf
Transaxle upper side x Engine Bolt A
Bolt B64
29650
29647
21
Transaxle lower side x Engine Bolt A
Bolt B
Bolt C
Bolt D
Bolt E40
40
8
20
46408
408
82
204
47030
30
71 in.·lbf
15
34
Diesel throttle body x Engine unit2121415
No.1 air tube assembly x Engine unit2525518
Diesel throttle body with No.2 air tube assembly x Engine unit2525518
Engine front mounting x Engine front mounting bracket8789064
Engine front mounting x Transaxle6465047
Engine rear mounting x Engine rear mounting bracket981,00072
Engine rear mounting x Transaxle6465047
Starter x Starter wire1515311
Starter x Transaxle3940029
Transaxle case protector x Transaxle2525018
Clutch release cylinder x Clutch housing121209
Clutch line bracket x Transaxle Bolt A
(See page MX–4) Bolt B12
4.9120
509
43 in.·lbf
Engine left mounting x Bracket8789064
Engine left mounting Bracket x Transaxle5253038
Front wheel1031,05076
Front exhaust pipe x Exhaust manifold6263046
Front exhaust pipe x Center exhaust pipe4849035
Engine rear mounting x Center member7374054
Engine rear mounting bracket x Body6465047
Engine rear mounting bracket x Engine rear mounting8789064
Engine front mounting x Center member5254038
Engine front mounting bracket x Transaxle6465047
Engine front mounting bracket x Engine front mounting8789064
Front transport hook x Center member3940029
Engine mounting center member x Body7374054
Transaxle case protector x Transaxle2525018
No.2 selecting bellcrank with selecting bellcrank support2020014
Shift and select lever shaft lock bolt4950036
Shift and select lever shaft assembly x Transmission case2020014
Transmission case cover x Transmission case2930022
Breather plug4950036
Output shaft lock nut1231,25090
Shift fork and shift head set bolt2424017
Rear bearing retainer x Transmission case4243031
Straight screw plug2525018
Straight screw plug (Reverse restrict pin)131309
Reverse idler gear shaft lock bolt2930022
Page 78 of 349
SS–8
– SERVICE SPECIFICATIONSMANUAL TRANSAXLE (E251)
Transmission case x Transaxle case
2930022
Transmission oil pipe x Transaxle case1717513
Reverse shift arm bracket assembly x Transaxle case1717513
Transmission oil pump assembly x Transaxle case1717513
Transaxle case receiver x Transaxle case7.47565 in.·lbf
Clutch release fork support4748035
Control lever housing support bracket x Transaxle case1717513
Vehicle speed sensor1717513
Clutch release line bracket x Transaxle case1717513
Back–up light switch4041030
Filler and drain plugs4950036
No.1 and No.2 oil receiver pipes x Transmission case1717513
Transmission oil cooler sub–assembly x Elbow3435025
Elbow x Transaxle case2727520
Transmission oil pump case x Oil pump cover101058
Differential left case x Differential right case6364046
Ring gear set bolt1241,26091
Shift lever assembly x Body121209
Retainer x Body4.95043 in.·lbf
Grommet retainer x Body4.95043 in.·lbf
Page 134 of 349

D06630
A
A
B
D02167
A
B
D06635
D06637
A
B
CED
– MANUAL TRANSAXLE (E251)MANUAL TRANSAXLE UNIT
MX–7
(d) Remove the 2 hole plugs and hole cover.
(e) Remove the 7 bolts and center member.
Torque:
Bolt A: 73 N·m (740 kgf·cm, 54 ft·lbf)
Bolt B: 52 N·m (540 kgf·cm, 38 ft·lbf)
21. JACK UP TRANSAXLE SLIGHTLY
Using a transmission jack, support the transaxle.
22. REMOVE ENGINE REAR MOUNTING BRACKET
Remove the 4 bolts and bracket.
Torque:
Bolt A: 98 N·m (1,000 kgf·cm, 72 ft·lbf)
Bolt B: 64 N·m (650 kgf·cm, 47 ft·lbf)
23. REMOVE ENGINE FRONT MOUNT AND MOUNTING
BRACKET
(a) Remove the bolt and nut.
Torque: 87 N·m (890 kgf·cm, 64 ft·lbf)
(b) Remove the 2 bolts.
Torque: 64 N·m (650 kgf·cm, 47 ft·lbf)
24. REMOVE TRANSAXLE LOWER SIDE MOUNTING
BOLT
Remove the 5 bolts.
Torque:
Bolt A: 40 N·m (408 kgf·cm, 30 ft·lbf)
Bolt B: 40 N·m (408 kgf·cm, 30 ft·lbf)
Bolt C: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
Bolt D: 20 N·m (204 kgf·cm, 15 ft·lbf)
Bolt E: 46 N·m (470 kgf·cm, 34 ft·lbf)
25. REMOVE TRANSAXLE
Lower engine left side and remove the transaxle from the en-
gine.
HINT:
At the time of installation, please refer to the following items.
Align the input shaft with the clutch disc and install the
transaxle to the engine.
Temporarily tighten the transaxle mounting bolts.
26. REMOVE TRANSAXLE CASE PROTECTOR
Remove the 2 bolts and protector.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)