Page 15 of 345
![SUBARU FORESTER 1999 Service Repair Manual Trouble code/
Contents of troublesMemory function Contents of diagnosis Index No.
46 Provided.ISide airbag harness (LH) is faulty.
IAirbag control module is faulty.<Ref. to 5-5 [T5P0].>
51 Provided.IS](/manual-img/17/57427/w960_57427-14.png "SUBARU FORESTER 1999 Service Repair Manual Trouble code/
Contents of troublesMemory function Contents of diagnosis Index No.
46 Provided.ISide airbag harness (LH) is faulty.
IAirbag control module is faulty.<Ref. to 5-5 [T5P0].>
51 Provided.IS")
Trouble code/
Contents of troublesMemory function Contents of diagnosis Index No.
46 Provided.ISide airbag harness (LH) is faulty.
IAirbag control module is faulty.
51 Provided.ISide airbag sensor (RH) is faulty.
ISide airbag harness (RH) is faulty.
IAirbag control module is faulty.
52 Provided.ISide airbag sensor (LH) is faulty.
ISide airbag harness (LH) is faulty.
IAirbag control module is faulty.
53 Provided. Side airbag sensor (RH) is faulty.
54 Provided. Side airbag sensor (LH) is faulty.
55 Provided. Side airbag module is inflated.
Airbag warning light remains
on.Not provided.IAirbag warning light is faulty.
IAirbag control module to airbag warning light
harness circuit is shorted or open.
IGrounding circuit is faulty.
IAirbag control module is faulty.
I(AB1) and (B31) are not connected properly.
I(AB6) is not connected properly to airbag control
module.
Airbag warning light remains
off.Not provided.IFuse No. 5 (in main fuse box) is blown.
IBody harness circuit is open.
IAirbag warning light is faulty.
IAirbag main harness is faulty.
IAirbag control module is faulty.
Warning light indicates
trouble code, then normal
code. (Flashing trouble
code.)Provided. Airbag system component parts are faulty.
Warning light indicates
trouble code, then normal
code. (Flashing normal
code.)Not provided.IAirbag connector is faulty.
IFuse No. 11 (in joint box) is blown.
IAirbag main harness is faulty.
IAirbag control module is faulty.
IBody harness is faulty.
2. HOW TO READ TROUBLE CODES
The AIRBAG warning light flashes a code corresponding to the faulty parts.
The long segment (1.2 sec on) indicates a ªtenº, and the short segment (0.3 sec on) indicates a ªoneº.
B5M0117A
16
5-5[T5A2]DIAGNOSTICS
5. Diagnostics Chart with Trouble Code
Page 291 of 345
1.
Item
Starter T
V
Model
Manufacturer
V
2
Direction
Number
No-load
characteristics V
Current
Rotating
Load
characteristics V
Current
T
8.73
or 16.0
or
Rotating
Lock
characteristics V
Current
T
15.7
or 28.9
or
Generator T
Rotating-field
age response Rotating-field
age response
Model
Manufacturer
V 2V\3207
Polarity
Rotating
Armature
Output 1,500
2,500
5,000
Regulated
Ignition
&
Ignitor
assembly Model
Manufacturer
Primary
W\26110%
Secondary W\26115%
Insulation
mary More
W
Spark
plug T
facturer
Standard
Alternate
RC8YC4
BKR6E-1
K20PR-U1
Thread
Spark
2
6-1[S100]SPECIFICA
1.
Page 318 of 345
1.
IBefore
always
repairing
provided
memory
ground
be
I Reassemble
sembly
I Adjust
this
I Connect
ing
I After
operate
CAUTION:
I Airbag
the
I All
nectors
equipment
I Be
ing
cylinder
2.
A:
1\)
connecting
2\)
of
G6M0102
3\)
4\)
T
3.4
\2611.0\2610.1\2610.7
NOTE:
IClean
to
I Connect
then
B:
W
I Electrolyte
the
I A
Especially
eyes,
prompt
I Batteries
sparks,
I V
space.
I For
wear
working
battery
I Do
fabrics,
corrosive
I T
metal
Never
battery
while
any
may
3
[W2B0]6-2SER
2.
Page 319 of 345
1.
IBefore
always
repairing
provided
memory
ground
be
I Reassemble
sembly
I Adjust
this
I Connect
ing
I After
operate
CAUTION:
I Airbag
the
I All
nectors
equipment
I Be
ing
cylinder
2.
A:
1\)
connecting
2\)
of
G6M0102
3\)
4\)
T
3.4
\2611.0\2610.1\2610.7
NOTE:
IClean
to
I Connect
then
B:
W
I Electrolyte
the
I A
Especially
eyes,
prompt
I Batteries
sparks,
I V
space.
I For
wear
working
battery
I Do
fabrics,
corrosive
I T
metal
Never
battery
while
any
may
3
[W2B0]6-2SER
2.
Page 324 of 345
5) Install in the reverse order of removal.
4. HIGH-MOUNTED STOP LIGHT
1) Disconnect ground cable from battery.
2) Remove cap (A) by prying on the edge with a
screwdriver.
3) Remove screws (B) and then detach cover (C).
4) Remove screws (D) and then detach high-
mounted stop light while disconnecting connector.
B6M1343B
5) Install in the reverse order of removal.
5. COMBINATION SWITCH
1) Disconnect ground cable from battery.
2) Remove instrument panel lower cover.
5-4 [W1A0].>
3) Remove screws which secure upper column
cover to lower column cover.
S6M0042
4) Disconnect connector from combination switch.
5) Remove screws which secure switch and
remove switch.
S6M0046
6) Install in the reverse order of removal.
C: INSPECTION
1. COMBINATION SWITCH (LIGHTING)
Move combination switch to respective positions
and check continuity between terminals.
H6M0500B
B6M1458A
7
[W4C1]6-2SERVICE PROCEDURE
4. Lighting
