1999 NISSAN PICK-UP wheel torque

ENGINE MECHANICAL
SECTION
EM
MODIFICATION NOTICE:
Diesel engine:
lThe main bearing clearance has been changed.
lThe tightening torque has been changed on bolts and nuts for the engine slinger, crankshaft pulley and
flywheel.
lA washer has been added between the glow plate and the glow plug.
CONTENTS
TD
OUTER COMPONENT PARTS........................... 2002
CYLINDER HEAD................................................ 2003SERVICE DATA AND SPECIFICATIONS
(SDS).................................................................... 2004
Inspection and Adjustment .............................. 2004
EM

\
FRONTAXLE&
FRONT SUSPENSION
SECTION
FA
MODIFICATION NOTICE:
lTightening torque have been changed.
lWheel alignment have been changed.
CONTENTS
FRONT SUSPENSION ........................................ 2002
SERVICE DATA AND SPECIFICATIONS
(SDS) .................................................................... 2004 Inspection and Adjustment .............................. 2004
FA

Special Service Tools
Tool number
Tool nameDescriptionUnit appli-
cation
C200
ST3127S000
Preload gauge
V1GG91030000
Torque wrench
V2HT62940000
Socket adapter
V3HT62900000
Socket adapter
NT124
Measuring pinion bearing
preload and total preload
X
KV38108300
Drive pinion flange
wrench
NT771
Removing and installing
propeller shaft lock nut and
drive pinion lock nut
X
ST3090S000
Drive pinion rear inner
race puller set
V1ST30031000
Puller
V2ST30901000
Base
NT527
Removing and installing drive
pinion rear inner cone (All)
Removing rear wheel sensor
rotor (C200)
X
a: 79 mm (3.11 in) dia.
b: 45 mm (1.77 in) dia.
c: 35 mm (1.38 in) dia.
KV38100600
Side bearing spacer drift
NT528
Installing side bearing spacer
X
a: 8 mm (0.31 in)
b: R42.5 mm (1.673 in)
ST30611000
Drift
NT090
Installing pinion rear
bearing outer race
X
ST30621000
Drift
NT073
Installing pinion rear bearing
outer race
X
a: 79 mm (3.11 in) dia.
b: 59 mm (2.32 in) dia.
PREPARATION
PD-2002