ENGINE – Fuel and Emission Control Parts11-27
FUEL AND EMISSION CONTROL PARTS
REMOVAL AND INSTALLATION
1
2 3
456
78 9
1011
12
1314
15
16
9 Nm 11 N m
9 Nm 11 N m
18 Nm
Removal steps
1. Throttle body
C2. Throttle body gasket
3. Fuel return pipe
B4. Fuel pressure regulator
5. O-ring
6. Insulator
7. Insulator
A8. Injector9. O-ring
10. Grommet
11. Delivery pipe
12. Vacuum hose and vacuum pipe
13. Vacuum tank
14. Vacuum tank bracket
15. Solenoid valve
16. Solenoid valve bracket
FUEL SUPPLY – General / Fuel Tank13-69
FUEL SUPPLY
GENERAL
OUTLINE OF CHANGE
The service procedures have been revised as shown below because of change in the fuel pump & gauge
assembly and the fuel gauge unit.
FUEL TANK
REMOVAL AND INSTALLATION
4
32 1
65
7
11
Removal steps
1. Fuel hose
2. Fuel pump & gauge assembly
3. Packing
A4. High-pressure fuel hose5. Fuel pipe assembly
6. Fuel gauge unit
7. Packing
NOTE
The service procedures other than those mentioned above
remain unchanged.
INSTALLATION SERVICE POINT
AHIGH-PRESSURE FUEL HOSE INSTALLATION
Caution
After connecting the quick-release joint of the
high-pressure fuel hose, pull it gently in the direction
of removal to check that the hose is firmly connected
with a play of about 3 mm.
