1999 LAND ROVER DEFENDER warning

88INSTRUMENTS
2
DESCRIPTION AND OPERATION FASCIA CONSOLE
1.Rear fog lamp switch
2.Rear wiper switch
3.Heated front screen switch (if fitted)
4.Hazard warning lamp switch
5.Heated rear window switch
6.Rear washer switch
7.Front fog lamps switch (if fitted)8.RH front window switch
9.RH heated front seat switch (if fitted)
10.Headlamp levelling control switch
11.Cigar lighter (if fitted)
12.LH heated front seat switch (if fitted)
13.LH front window switch
ProCarManuals.com

INSTRUMENTS
3
DESCRIPTION AND OPERATION For 02MY a new fascia console has been introduced
to accommodate the additional switches for electric
windows etc.
The console comprises a plastic moulding secured to
the fascia with five screws. The new console allows
existing switches to be repositioned and has provided
the opportunity to commonise the switches with other
Land Rover models. The switches and components
located in the console are as follows:
Cigar lighter (if fitted)
Headlamp levelling control
LH and RH heated front seat switches (if fitted)
LH and RH front window lift switches
Front fog lamp switch (if fitted)
Rear fog lamp switch
Rear wash/wipe switch
Rear wiper switch
Hazard warning lamp switch
Heated rear window switch
Heated front screen switch (if fitted)
A central cut-out in the console provides for the
installation of the radio, where fitted, or a coin tray for
markets without a standard radio installation.
ProCarManuals.com

INSTRUMENTS
1
REPAIR INSTRUMENT PACK
Service repair no - 88.30.38
Remove
1.Remove 4 screws securing instrument pack to
fascia.
2.Release instrument pack from fascia.
3.Disconnect 3 instrument pack harness to main
harness multiplugs.
4.Remove instrument pack.
5.Disconnect 4 Lucars from left and right hand
heater controls.
6.Disconnect 7 multiplugs from rear of instrument
pack.
7.Remove clamping rings from 4 gauges.
8.Remove 4 gauges from instrument pack.
9.Remove 2 Torx screws securing warning lamp
assembly to instrument pack.
10.Remove warning lamp assembly from instrument
pack.
Refit
11.Fit warning lamp assembly to instrument pack
and secure with Torx screws.
12.Fit gauges to instrument pack and secure with
clamping rings.
13.Connect multiplugs to rear of instrument pack.
14.Connect Lucars to left and right hand heater
controls.
15.Position instrument pack to fascia and connect
instrument pack harness to main harness
multiplugs.
16.Fit instrument pack to fascia and secure with
screws.
ProCarManuals.com