B04203
B04204
IN-22
- INTRODUCTIONFOR ALL OF VEHICLES
22 Author: Date:
2004 LAND CRUISER (RM1071U)
(d) Using Chassis Dynamometer:
Observe the following instructions and then measure with
the rear wheels.
(1) Remove the front propeller shaft.
(2) Put the center differential in LOCK position.
(3) If the vehicle is equipped with Vehicle Skid Control
(VSC) & Traction Control (TRAC) system, prohibit
the system from the activation (See step 2.).
(4) Ensure that the vehicle is securely fixed.
HINT:
Sudden shifting, braking, acceleration or deceleration is
not allowed.
Do not forget to change the Vehicle Skid Control (VSC) &
Traction Control (TRAC) system to operational condition
after the test. Check that the VSC warning indicator light
goes off when restarting the engine.
(e) On-V ehicle Wheel Balancing:
When doing on-vehicle wheel balancing on a full-time
4WD vehicle, to prevent each wheel from being rotated at
different speed in different directions (which could dam-
age the center differential), always be sure to observe the
following precautions.
(1) All of 4 wheels should be jacked up, being apart
from the ground completely.
(2) Put the center differential in LOCK position.
(3) If the vehicle is equipped with Vehicle Skid Control
(VSC) & Traction Control (TRAC) system, prohibit
the system from the activation (See step 2.).
(4) The parking brake lever should be fully released.
(5) None of the brakes should be applied.
(6) The wheels should be driven on the wheel balancer
with the engine running.
(7) Carry out the wheel balancing with the transmission
position in D position.
HINT:
When doing this balancing, pay attention to the other
wheels rotating at the same time.
Sudden acceleration, deceleration or braking is not al-
lowed.
Do not forget to change the Vehicle Skid Control (VSC) &
Traction Control (TRAC) system to operational condition
after the test. Check that the VSC warning indicator light
goes off when restarting the engine.
- MAINTENANCEINSIDE VEHICLE
MA-3
51 Author: Date:
2004 LAND CRUISER (RM1071U)
13. ACCELERATOR PEDAL
Check the pedal for smooth operation and uneven pedal effort or catching.
14. BRAKE PEDAL (See page BR-9)
(a) Check that pedal for smoothly operation.
(b) Check that the pedal has the proper reserve distance and freeplay.
15. BRAKE BOOSTER (See page BR-40)
Check the brake booster function.
16. BRAKES
At a safe place, check that the brakes do not pull to one side when applied.
17. PARKING BRAKE (See page BR-14)
(a) Check that the lever has the proper travel.
(b) On a safe incline, check that the vehicle is held securely with only the parking brake applied.
18. AUTOMATIC TRANSMISSION ºPARKº MECHANISM
(a) Check the lock release button of the selector level for proper and smooth operation.
(b) On a safe incline, check that the vehicle is held securely with the selector lever in the ºPº position and
all brakes released.
