62L005±1
Temperature range anticipated before next oil change
ENGINE193
SPECIFICATIONS
± GENERALModel
Type
Bore and stroke
Displacement
Valve clearance (engine cold) Intake
Exhaust
Drive belt tension (with Borroughs drive belt tension gauge No.
BT±33±73F)
1MZ ± FE
6 cylinder V type, 4 cycle, gasoline
87.5 X 83 mm (3.44 X 3.27 in.)
2995 cm
3 (182.7 cu.in.)
0.15 ± 0.25 mm (0.006 ± 0.010 in.)
0.25 ± 0.35 mm (0.010 ± 0.014 in.)
115 20 lb.
± LUBRICATION SYSTEM
Oil capacity Drain and refillwith filter
without filter
Oil grade
Recommended oil viscosity (SAE):
4.7 L (5.0 qt., 4.1 lmp.qt.)
4.5 L (4.8 qt., 4.0 lmp.qt.)
API SH, ºEnergy±Conserving IIº or SJ, ºEnergy±Conservingº multigrade
engine oil or ILSAC multigrade engine oil
± COOLING SYSTEM
ENGINE
198
USED ENGINE OIL
CAUTION
Used engine oil contains potentially harmful contaminants
which may cause skin disorders such as inflammation or
skin cancer, so care should be taken to avoid pr olonged and
repeated contact with it. To remove used engine oil from
your skin, wash thoroughly with soap and water.
Do not leave used oil within the reach of children.
Dispose of used oil and used oil filters only in a safe and
acceptable manner. Do not dispose of used oil and used oil
filters in household trash, in sewers or onto the ground.
Call your Lexus dealer or a service station for information
concerning recycling or disposal.
CHECKING THE ENGINE OIL LEVEL
62E001±1
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
1. To get a true reading, the vehicle should be on a level spot. After turni\
ng
off the engine, wait a few minutes for the oil to drain back into the bott\
om of
the engine.
2. Pull out the dipstick, and wipe it clean with a rag.
3. Reinsert the dipstick and push it in as far as it will go, or the reading will
not be correct.
62E002
