1998 Lexus ES300 neutral no key

BE003±4
Note: When the cruise control is being used, even if you downshift the transmissio\
n by turning off the overdrive switch, engine braking will
not be applied because the cruise control is not cancelled. For the operat\
ion to decrease the vehicle speed, see page 146.
Parking, engine starting and key
removal position
Reverse position
Neutral position
Normal driving position
Position for engine braking
Position for stronger engine braking
than that in º2º position
With the brake pedal depressed, shift
while holding the lock release button
in. (The ignition switch must be in
ºONº position.)
Shift while holding the lock release
button
Overdrive switch
ºOFFº position
(Shifting into
overdrive not
possible)
ºO/D OFFº indicator
light on the instrument
cluster
For selecting either a three±speed or
four±speed transmission
ºONº position
(Shifting into
overdrive possible)
Lock release button (To prevent misshifting)
BASIC OPERATION ± QUICK REFERENCE
3
3. AUTOMATIC TRANSMISSION

With the brake pedal depressed, shift while holding
the lock release button in. (The ignition switch must
be in the ºONº position)
Shift while holding the lock release button in.
STARTING AND DRIVING137
AUTOMATIC TRANSMISSION
Your automatic transmission has a shift lock system to minimize the
possibility of incorrect operation. This means you can only shift out of
ºPº position when the brake pedal is depressed (with the ignition switch
in ºONº position and the lock release button pressed in). ( )
31E005
1
Lock release button
2Overdrive switch
For selecting either a three±speed or four±speed transmission.
When the cruise control is being used, even if you downshift the
transmission by t urning off the overdrive switch, engine braking will not
be applied because the cruise control is not cancelled. For the operation\
to decrease the vehicle speed, see page 146.
3 Shift position indicator
The shift position is also displayed on the instrument cluster.
P:Parking, engine starting and key removal position
R: Reverse position
N: Neutral position
D: Normal driving position (Shifting into overdrive possible)
2: Position for engine braking
L: Position for stronger engine braking than that in º2º position

STARTING AND DRIVING
138
Correct use of the automatic transmission is explained in the following
parts.
(a) Normal driving
(b) Using engine braking
(c) Using the º2º and ºLº positions
(d) Backing up
(e) Parking
(f) Good driving practice
(g) Rocking your vehicle if stuck
(h) If you cannot shift the selector lever out of ºPº position
(a) Normal driving
31E006

1
ºPº (Park) position 2ºNº (Neutral) position
1. Start the engine as instructed in ºHow to start the engineº on page 136.
The transmission must be in ºPº or ºNº. The engine will not st\
art in ºRº, º2º,
ºLº or ºDº position even if the ignition key is turned to ºSTARTº.