1998 Lexus ES300 load capacity

GAUGES, METERS AND SERVICE REMINDER INDICATORS
28
FUEL GAUGE
13E001

Low fuel level warning light
The gauge is displayed when the ignition switch is on and indicates the
approximate quantity of fuel remaining in the tank.
It is a good idea to keep the tank over 1/4 full.
This fuel gauge has a non±return type needle which remains at the last
indicated position when the ignition switch is turned off.
If the fuel level approaches ºEº or the low fuel level warning light\
comes on,
fill the fuel tank as soon as possible.
On inclines or curves, due to the movement of fuel in the tank, the fuel g\
auge
needle may fluctuate or the low fuel level warning light may come on earlier
than usual.
If the fuel tank is completely empty, the malfunction indicator lamp comes on.
Fill the fuel tank immediately.
The indicator lamp goes off after driving several times. If the indicator lamp
does not go off, contact your Lexus dealer as soon as possible.
See the inner back cover for fuel capacity and recommended fuel selectio\
n.
ENGINE COOLANT
TEMPERATURE GAUGE
13E002±1

Normal range
The gauge indicates the engine coolant temperature when the ignition
switch is on. The engine operating temperature will vary with changes in
weather and engine load.
If the needle points to the red zone or higher, stop your vehicle and allow the
engine to cool.

INTERIOR EQUIPMENT
48
LUGGAGE STOWAGE PRECAUTIONS
When stowing luggage or cargo in the vehicle, observe the following:
Put luggage or cargo in the trunk when at all possible. Be sure all items are
secured in place.
 Be careful to keep the vehicle level. Placing the weight as far forward\
as
possible helps maintain vehicle balance.
 For better fuel economy, do not carry unnecessary weight.
CAUTION
Do not place anything on the filler panel behind the rear
seatback. Such items may be thrown about and possibly
injure people in the vehicle during sudden braking or an
accident.
 Do not drive with objects left on top of the instrument
panel. They may interfere with the driver's field of view.
Or they may move during sharp vehicle acceleration or
turning, and impair the driver's control of the vehicle. In
an accident they may injure the vehicle occupants.
NOTICE
Do not load the vehicle beyond the vehicle capacity weight specified on
the tire pressure label.

CHASSIS
204
± STEERING
Wheel freeplay
Power steering fluid type
Less than 30 mm (1.2 in.)
Automatic transmission fluid DEXRONII or III
± TIRES AND WHEELSTire size
Recommended cold tire inflation pressure Vehicle load up to 4 occupants
Vehicle loaded up to vehicle capacity weight
Spare tire
Trailer towing (conventional and snow tires)
Wheel size
Wheel nut torque
P205/65 R15 92V
180 kPa (1.8 kgf/cm
2 or bar, 26 psi) (Both front and rear)
220 kPa (2.2 kgf/cm2 or bar, 32 psi) (Both front and rear)
220 kPa (2.2 kgf/cm2 or bar, 32 psi)
220 kPa (2.2 kgf/cm2 or bar, 32 psi) (Both front and rear)
15 x 6 JJ
103 N´m (10.5 kgf´m, 76 ft´lbf.)

CHASSIS
210
Warning: The traction grade assigned to this tire is based on braking (straigh\
t
ahead) traction tests and does not include cornering (turning) traction.
Temperature A, B, C
± The temperature grades are A (the highest), B, and
C, representing the tire's resistance to the generation of heat and its ability to
dissipate heat when tested under controlled conditions on a specified indoor
laboratory test wheel. Sustained high temperature can cause the material of
the tire to degenerate and reduce tire life, and excessive temperature can \
lead
to sudden tire failure. The grade C corresponds to a level of performan\
ce
which all passenger car tires must meet under the Federal Motor Vehicle
Safety Standard No. 109. Grades B and A represent higher levels of
performance on the laboratory test wheel than the minimum required by law.
Warning: The temperature grade of this tire established for a tire that is
properly inflated and not overloaded. Excessive speed, underinflation, or
excessive loading, either separately or in combination, can cause heat buildup
and possible tire failure.
Tire selection
When replacing a tire, use only the same size and construction as
originally installed and with the same or greater load capacity.
Using any other size or type of tire may seriously affect handling, ride,
speedometer/odometer calibration, ground clearance, and clearance between
the body and tires or snow chains.
Do not mix radial, belted, or conventional tires on your vehicle.
Do not use tires or wheels other than the manufacturer's recommended
size.
It can cause dangerous handling characteristics, resulting in loss of co\
ntrol.
If you need to change from conventional tires to radial tires or vice ve\
rsa,
replace them as a set.
INSTALLING SNOW TIRES AND CHAINS
When to use snow tires or chains
Snow tires or chains are recommended when driving on snow or ice.
On wet or dry roads, conventional or radial tires provide better traction \
than
snow or studded tires.
Snow tire selection
If you need snow tires, select the same size, construction and load capacity
as the original tires on your Lexus.
Do not use tires other than stated above. Since your vehicle has radial t\
ires
as original equipment, make sure your snow tires also have radial
construction. Do not install studded tires without first checking local
regulations for possible restrictions.
Snow tire installation
Snow tires should be installed on all wheels.
Installing snow tires on the front wheels only can lead to an excessive
difference in road grip capability between the front and rear tires which could
cause loss of vehicle control.

CHASSIS
212
REPLACING WHEELS
When to replace your wheels
If you have wheel damage such as bending, cracks or heavy corrosion, the
wheel should be replaced.
If you fail to replace damaged wheels, a tire may slip off a wheel or they may
cause loss of handling control.
Replacement with used wheels is not recommended as they may have been
subjected to rough treatment or high mileage and could fail without warning.
Also, bent wheels which have been straightened may have hidden structural
damage and therefore should not be used. Never use an inner tube in a leaking
wheel which is designed for a tubeless tire.
Wheel selection
When replacing wheels, care should be taken to ensure that they are
equivalent to those removed in load capacity, diameter, rim width, and
offset.
Correct replacement wheels are available at your Lexus dealer.
A wheel of a different size or type may adversely affect handling, wheel and
bearing life, brake cooling, speedometer/odometer calibration, stopping
ability, headlight aim, bumper height, vehicle ground clearance, and tire or
snow chain clearance to the body and chassis.
ALUMINUM WHEEL PRECAUTIONS
 After driving your vehicle the first 1600 km (1000 miles), check that the
wheel nuts are tight.
 If you have rotated, repaired, or changed your tires, check that the whe\
el
nuts are still tight after driving 1600 km (1000 miles).
 When using tire chains, be careful not to damage the aluminum wheels.
 Use only the Lexus wheel nuts and wrench designed for your aluminum
wheels.
 When balancing your wheels, use only Lexus balance weights or
equivalent and a plastic or rubber hammer.
 As with any wheel, periodically check your aluminum wheels for damage.
If damaged, replace immediately.
SUSPENSION AND CHASSIS
CAUTION
Do not modify the suspension/chassis with lift kits, spacers,
springs, etc. It can cause dangerous handling characteristics,
resulting in loss of control.