1998 JAGUAR X308 ECU

[x] Cancel search: ECU

Page 918 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
1.
 Remove the blanking plugs from the pipes and 
unions. Fit a new sealing washer to the high pressure 
hose joint. 
2. Connect the high pressure hose union. 
3. Connect the feed hose to the pump.

Page 919 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
 
38
. 
Connect the radiator top hose. 
1. Connect the hose to the radiator. 
2. Reposition and secure  the hose retaining clip. 
 
39
 . 
Connect the radiator bottom hose. 
1. Connect the hose to t

Page 920 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
3.
 Fit the hose and tighten the securing bolt. 
 
42 . Conne
 ct the transmission 
oil cooler upper pipe. 
1. Remove the blanking plugs from the pipe and the  radiator. 
Fit and  
 fully seat a

Page 921 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
2
. Reposition and secure the pipe clip. 
3. Position the expansion tank  to the left side enclosure 
panel. 
 
47
 . 
Fit the expansion tank securing nuts. 
1. Connect the coolant level sensor conn

Page 922 of 2490

JAGUAR X308 1998 2.G Workshop Manual  
to th
e throttle body. 
 
51 . Co
 nnect the intake tube to the throttle body. 
1. Fit a new seal and connect the intake tube to the  throttle body. 
2. Fit the two bolts which secure the intake tub

Page 963 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine Cooling - Coolant Expansi
 on Tank 
Re
moval and Installation 
Remov

al 
1. 
O
 pen the engine compartment and fit paintwork protection 
sheets. 
 
2.  R
 emove the centre trim panel 
from the

Page 965 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine Cooling - Coolant Outlet Pipe
  
Re
moval and Installation 
Remov

al 
Installation 
 
  1. 
O
 pen the engine compartment and fit paintwork protection 
sheets. 
2.  Drain the radiator. Refer t

Page 966 of 2490

JAGUAR X308 1998 2.G Workshop Manual Engine Cooling - Coolant Outlet Pipe 
Remo
 val and Installation 
Remov
a
 l 
1. 
Op
 en the engine compartment and fit paintwork protection 
sheets. 
2.  Drain the radiator. Refer to Ge neral Procedu