1998 JAGUAR X308 toe in

TABLE OF CONTENTS  
 
    1: General  Information  
 
        
100:
 Service  Information  
 
             100‐00:  General  Information  
                 Description  and  Operation  
                     General Service  Information  
                     Terminology  Glossary  
 
             100‐01:  Identification  Codes  
                 Description  and  Operation  
                     Identification  Codes  
 
             100‐02:  Jacking  and  Lifting  
                 Description  and  Operation  
                     Jacking 
                     Safety Precautions  
                     Vehicle Recovery  
                 General Procedures  
                     Using the  Vehicle  Ja
ck  
                     Using the  Workshop  Jack  
 
    2:  Chassis 
 
        204:  Suspension 
 
             204‐00:  Suspension  System  ‐ General  Information  
                 Specification  
                                     
                 General
 Procedures  
                     Front
 Camber  and  Caster  Adjustment  (57.65.02)  
                     Front
 Camber,  Caster and  Toe  Adjustment  (57.65.03)  
                     Front
 Toe  Adjustment  (57.65.01)  

                    Rear Toe  Adjustment  (57.65. 08) 
                     Whee
l
  Bearing  Circlip  Inspection  
                     Wheel Bearing  Inspection  
 
             204‐01:  Front  Suspension 
                 Specification  
                 Description  and  Operation  
                     Front Suspension  
                 Removal and  Installation  
                     Ball Joint  (60.15.02)  
                     Rear Lower  Arm  (60.35.54)  
                     Rear Lower  Arm  Bushing  (60.35.56)  
                     Front Shock  Absorber  (60.30.04)  
                     Spring 
                     Spring Seat  (60.20.03)  
                     Front Sta
bilizer  Bar  (60.10.01)  
                     Front Stabilizer  Bar  Bushing  (60.10.04)  
                     Front Stabilizer  Bar  Link  (60.10.02)  
                     Upper Arm  Bushing  
                     Front Wheel  Bearing  (60.25.40)  
                     Wheel Hub  
                     Wheel Knuckle  (60.25.23)  
                     Wheel Knuckle  and Wheel  Hub  Assembly  (60.25.38.90)  
                     Wheel Knuckle  and Wheel  Hub  Assembly  Conversion  (60.25.43)  
 
             204‐02:  Rear  Suspension 
                 Specif
ication  
                 Description  and  Operation  
                     Rear Suspension  
                 Removal and  Installation  
                     Axle Bump  Stop  (64.30.15)  
                     Rear Suspension  and Axle  Assembly  (64.25.01)  
                     Rear Shock  Absorber  (64.30.02)  
                     Shock Absorber  Lower  Bushing  (64.30.39)  
                     Spring (64.20.01)  
                     Rear Stabilizer  Bar  (64.35.08)  ‐ 4.0L  SC  V8 ‐ AJ26  
                     Rear Stabilizer  Bar  Bushing  (64.35.18)  ‐ 4.0L  SC V8 ‐ AJ26  

Al
l the above figures
are at "showroom" height. (See ride height section above).
Ti
res must be inflated
to normal pressure.
For additional informat ion, refer to Section 204
-0
4 Wheels and Tires
.
Whe
el Alignment - Front Castor - XJR Excluding NAS, and German Super-8

Al
l the above figures
are at "showroom" height. (See ride height section above).
Ti
res must be inflated
to normal pressure.
For additional informat ion, refer to Section 204
-0
4 Wheels and Tires
.
Whe
el Alignment - Front Castor - XJR NAS, and Comfort/Sport/Daimler Super-8

Al
l the above figures
are at "showroom" height. (See ride height section above).
Ti
res must be inflated
to normal pressure.
For additional informat ion, refer to Section 204
-0
4 Wheels and Tires
.
Whe
el Alignment - Front Toe - XJR Excluding NAS, and German Super-8

Al
l the above figures
are at "showroom" height. (See ride height section above).
Ti
res must be inflated
to normal pressure.
For additional informat ion, refer to Section 204
-0
4 Wheels and Tires
.
Whe
el Alignment - Front Toe - XJR NAS, and Comfort/Sport/Daimler Super-8
XJR
Excluding NAS, and German Super-8
1

998 to 2003.5
VIN - 812317 to F59525
Units
Castor

Le
ft - Hand
Rig
ht - Hand
Bal
ance (RH - LH)
MinMaxMinMaxMinMax
All Right

-Hand drive and Japan
De
grees/minutes
+4
° 00'
+8
° 00'
+4
° 00'
+8
° 00'
-1
° 12'
+1
° 12'
Decimal degrees+4

.00°
+8
.00°
+4
.00°
+8
.00°
-1.
20°
+1
.20°
R

est of World
De
grees/minutes
+4
° 00'
+8
° 00'
+4
° 00'
+8
° 00'
-1
° 12'
+1
° 12'
Decimal degrees+4

.00°
+8
.00°
+4
.00°
+8
.00°
-1.
20°
+1
.20°
XJR

NAS, and Comfort/Sport/Daimler Super-8
1

998 to 2003.5
VIN - 812317 to F59525
Units
Castor

Le
ft - Hand
Rig
ht - Hand
Bal
ance (RH -
LH)
MinMaxMinMaxMinMax
All Right
-Hand drive and Japan
De
grees/minutes
+4
°
00'
+8
°
00'
+4
°
00'
+8
°
00'
-1
°
12'
+1
°
12'
Decimal degrees+4
.00°
+8
.00°
+4
.00°
+8
.00°
-1.
20°
+1
.20°
USA, Canada an

d Mexico, Dominican
Republic (NAS)
De
grees/minutes
+4
°
00'
+8
°
00'
+4
°
00'
+8
°
00'
-1
°
12'
+1
°
12'
Decimal degrees+4
.00°
+8
.00°
+4
.00°
+8
.00°
-1.
20°
+1
.20°
R

est of World
De
grees/minutes
+4
°
00'
+8
°
00'
+4
°
00'
+8
°
00'
-1
°
12'
+1
°
12'
Decimal degrees+4
.00°
+8
.00°
+4
.00°
+8
.00°
-1.
20°
+1
.20°
XJR

Excluding NAS, and German Super-8
1

998 to 2003.5
VIN - 812317 to F59525
Units
Fr
ont Toe

To

tal Toe
MinMax
All Right-Hand driv

e and Japan
De
grees/minutes
0
° 05'
+0
° 25'
Decimal degrees0.

08°
+0
.42°
R

est of World
De
grees/minutes
0
° 05'
+0
° 25'
Decimal degrees0.

08°
+0
.42°
XJR

NAS, and Comfort/Sport/Daimler Super-8
1

998 to 2003.5
VIN - 812317 to F59525
Units
Fr
ont Toe

To

tal Toe
MinMax
All Right-Hand driv

e and Japan
De
grees/minutes
0
° 05'
+0
° 25'
Decimal degrees0.

08°
+0
.42°


USA, Canada an

d Mexico
, Dominican Repulic (NAS)
De
grees/minutes
0
° 05'
+0
° 25'
Decimal degrees0.

08°
+0
.42°
R

est of World
De
grees/minutes
0
° 05'
+0
° 25'
Decimal degrees0.

08°
+0
.42°

All the above fi
gures
are at "showroom" height. (See ride height section above).
Tires must be infl
ated
to normal pressure.
For additional informat ion, refer to Section 204
-04
Wheels and Tires
.
Wh
eel Alignment - Rear Camber

All the above figu res
are at "s
howroom" height. See vehicle ride height section above.
Tires must be infl
ated
to normal pressure.
For additional informat ion, refer to Section 204
-04
Wheels and Tires
.
W
h
eel Alignment - Rear Toe

All the above figu res
are at "s
howroom" height. See vehicle ride height section above.
Tires must be infl
ated
to normal pressure.
For additional informat ion, refer to Section 204
-04
Wheels and Tires
.


1 998 to
2003.5
VIN - 812317 to F59525
Units
Cambe r

Left
Hand
Rig
h
t Hand
Bal
a
nce (RH - LH)
Min MaxMin MaxMinMax
All MarketsDe
grees
/Minutes
-
1
° 12'
-0
° 06'-1° 12'-0
° 06'
-1
°
00
+1
°
00
De
ci
mal Degrees
-1.
2
0°
-0
.1
0°
-1.
2
0°
-0.
1
0°
-1.
0
0°
+1
.00
°
1
998 to
2003.5
VIN - 812317 to F59525
Units
To e

Left
Hand
Rig
h
t Hand
To
t
al Toe
Thr
u
st Angle
MinMaxMinMaxMin MaxMin Max
All MarketsDe
grees
/Minutes
+0
°
05'
+0
° 15'+0°
05'
+0
° 15'0°
10'
+0
° 30'-0° 05'+0 °
05'
De
ci
mal Degrees
+0
.08
°
+0
.25
°
+0
.08
°
+0
.25
°
0.
17
°
+0
.50
°
-0.
0
8°
+0
.08
°

Suspension System - General Information - Front Camber
, Caster and Toe
Adjustment
Gen e
ral Procedures

1.
NOTE: Before checking or adju sting any alignment, examine
the vehicle for curb impact dama ge on wheels and subsequent
damage to steering and suspension components.
• NOTE: Wheel alignment must no t be carried out with a space
saver wheel installed on any of the hubs.
• NOTE: Before carrying out any ch ecking or adjustment of wheel
alignment, ensure that the vehicl e wheels, tires and tire pressures
are to Jaguar specification.
• NOTE: Position steering wheel in straight ahead position before
adjusting front wheel toe evenly on both tie rods to maintain
centralization of steering wheel.
Position alignment checking equipment on vehicle and following
equipment manufacturer's instructions, check and if necessary
adjust to Specifications in Section 204-01.
2. Check and as necessary adjust front wheel caster. Refer to
57.65.05.
3. Check and as necessary adjust front wheel camber. Refer to
57.65.06.
4. Check and as necessary adjust fr ont wheel alignment. Refer to
57.65.01.

Suspension System - General Infor
mation - Front Toe Adjustment
Gen
eral Procedures

1.
NOTE: Before checking or adju sting front wheel alignment,
examine the vehicle for curb impact damage on wheels and
subsequent damage to steering and suspension components.
• NOTE: Wheel alignment must no t be carried out with a space
saver wheel installed on any of the hubs.
• NOTE: Before carrying out any ch ecking or adjustment of wheel
alignment, ensure that the vehicl e wheels, tires and tire pressures
are to Jaguar specification.
• NOTE: Position steering wheel in straight ahead position before
adjusting front wheel toe evenly on both tie rods to maintain
centralization of steering wheel.
Position alignment checking equipment on road wheels and
following equipment manufacturer's instructions, check and if
necessary adjust front wheel toe to Specifications in Section
204-01.

Suspension System - General Inform
ation - Rear Toe Adjustment
Gen
e
ral Procedures

1.
NOTE: Wheel alignment must not be carried out with a space
saver wheel installed on any of the hubs.
• NOTE: Before carrying out any ch ecking or adjustment of wheel
alignment, ensure that the vehicl e wheels, tires and tire pressures
are to Jaguar specification.
• NOTE: Before checking or ad justing rear wheel alignment,
examine the vehicle for curb impact damage on wheels and
subsequent damage to suspension components.
Position alignment checking equipment on road wheels and
following equipment manufacturer's instructions, check and if
necessary adjust rear wheel alignment to Specifications in
Section 204-02.

Rear
Suspension - Rear Suspension
Description an
d Operation

Description
The i
ndependent rear suspension incorporates co-axial sp
ring and shock absorber units, a subframe, wishbone tie,
pendulum assembly, mounting brac ket, differential strut, cast wishbones and hub carriers. The suspension assembly is
positively located by the subframe, mounting bracket and differential strut.
Each wi
shbone pivots on a fulcru
m bolt which locates in the wishbone tie and pendulum assembly.
The wish
bone tie and pendulum assemblies are respectively in
stalled at the front and rear of the final drive housing.
The differential
strut is secured to the wishbone tie assembly.
Two ti

e rods are installed between the front of the
subframe and the top of the final drive housing.
The ou
ter extremity of each wishbone
is secured to its respective hub carrier assembly by a fulcrum bolt.
Each fulcrum bolt head incorporates an ec centric circular flange which locates in a groove in the front face of the wishbone
arm. Rotation of the fulcrum bolt results in horizontal movement of the bolt shank in an elongated hole in the rear of the
wishbone arm. This acti on achieves corresponding movement of the hub carrier, facilita ting adjustment of road wheel toe-
in.
It
em
Par
t Number
De
scription
1—Hub Carrier
2—Wi

shbone
3—Sprin

g
4—Shock Absorber
5—Suspensi

on Turret

6—Suspensi
on Subframe
7—Moun

ting Bracket
8—D

ifferential Strut
9—Stabilizer Ba

r (Supercharged and
Sport Suspension Models only)
10—Bum
p Stop