Page 1 of 414
Downloaded from www.Manualslib.com manuals search engine
Page 2 of 414
Downloaded from www.Manualslib.com manuals search engine c
Page 3 of 414
Downloaded from www.Manualslib.com manuals search engine
Page 4 of 414
Downloaded from www.Manualslib.com manuals search engine .
1 power controls
Page 5 of 414
Downloaded from www.Manualslib.com manuals search engine
Page 6 of 414
Downloaded from www.Manualslib.com manuals search engine
Page 7 of 414
Downloaded from www.Manualslib.com manuals search engine Supplement t
AstroBafari Uwnd
Replacing Restraint System Parts After a Crash
‘0 the 1998
zr’s Manual If you’ve had a.crash, do you need new safety belts or ~~~~
built-in child restraint parts? This information replaces the “Replacing Restraint
System Parts After a Crash” portion located in Section
After a very minor collision, nothing may be necessary.
1 in your owner’s manual. But if the safety belts or built-in child restraint harness
straps were stretched, as they would be if worn during a
more severe crash, then
you need new safety belts or
harness straps.
Part No. 15020756
1
Page 8 of 414
Downloaded from www.Manualslib.com manuals search engine If you ever see a label on the drrver’s or right front
passenger’s safety belt that says to replace
the belt, be
sure
to do so. Then the new belt will be there to help
protect
you in a collision. You would see this label on
the belt near the latch plate.
If safety belts or built-in child restraint harness straps
are cut or damaged, replace them. Collision damage also
may mean you will need to have safety belt, built-in
child restraint or seat parts repaired
or replaced. New
parts and repairs may be necessary even if the safety belt
or built-in child restraint wasn’t being used at the time
of the collision.
If an air bag inflates, you’ll need to replace air bag
system parts. See
the part on the air bag system earlier
in this section.
2