Page 87 of 426
I
LOCK @I: This is the only position from which
YOU can remove the key. This position locks YOU
igition, steering wheel and transaxle. It’s a
theft-deterrent feature.
OFF (C): This position lets YOU turn ofif the engine but
still turn the steering wheel. It doesn’t lock the steering
wrlhee1 like LOCK and it doesn’t send my electrical
power to
the accessories. The instrument panel cluster
will remain powered in OFF to illarminate the gear sWt
indicator. The cluster will also activate the parking brake
fight when the parking brake is set. Use OW if you must
have your vehicle in motion while the engine is
not mnanaing.
RUN (D): This is the position that the switch returns to
after you start YSUP engine and release the switch. This
is &e p~sisi~n for driving. Even when the engine is not
running, you can use RUN to operate your electrical
power accessories anad t~ display some instrument panel
START (E): This position starts your engine. When the
engine
starts, release the key. The ignition switch will
return to RUN for ~a~rrrnal driving.
wdng
lights.
Retained Acces§ory Power
After you turn the ignition off md even remove the key,
you
will still have electrical power to such accessories
as the radio, astroroof ad power windows for up to
10 minutes. Power is shut off if you open a door.
2-21
ProCarManuals.com
Page 102 of 426
... . ....
v
The turn signal has two upward (for right) and two
downward (for left) positions. These pcsitions aIbw you
to signal a turn or m. Iarae change.
To signal a mrn, move the lever all the way up
or down. Wnen the turn is hished, the lever will
return automatically.
pane! will flash in the
direction
cf the turn OF lane
change.
Hf your vehicle is
equipped with the Head-Up
will also apex in the
display area to indicate the
directim of the turn or
lane change.
Display (HUD), an mow
ProCarManuals.com
Page 106 of 426
It is important to note that the moisture-sensing delay
wiping feature can be ovenidden
at any time by
manually turning the wiper
band to LO OF WH speed.
If the windshield on your vehicle ever needs
replacement, make sure that the new windshieid is
moisture-sensing delay compatible.
If your vehicle is equipped with a DE@, a
WINDSHELD WASHER FLUID LOW message
will
appear on the display when the vehicle is low on
washer fluid.
With cruise contrd, you can rnaintain a speed of about
25 mpk (40 kh) OP more without keeping YQW foot on
the accelerator. This can really help on long trips.
Cmise control does not work at speeds below about
25 mph (40 krdh).
ProCarManuals.com
Page 118 of 426
Ywr vehicle may have m electrochromic inside
r~wview
minor with a compass.
When set in the JMIRROR position, this mirror
automatically changes to reduce glare
fkom headamps
behind you.
A time delay feature prevents rapid
changing
from the day to night positions while driving
under lights and through
traffic.
The mirrcpa: also includes m eight-point compass display
in the upper right CQH~W of the mirror face. men on,
the compass automatically calibrates as the vehicle
is driven.
When cleaning the
naimor, use a gaper towel or similar
materid dampened with glass cleaner. Do not spray
glass cleaner directly
on the mirror as that may cause the
liquid cleaner to enter the minor housing. Use a cotton
swab and glass cleaner to clean the ph~toce~~s
whew necessary.
ProCarManuals.com
Page 119 of 426
Press the COMPASS switch once to turn the compass on
Or Sff.
if, after two SecoCds, the display does not show a
cornpass heading (“N9 for NQI-~K, ~QP example), there
may be a strong magnetic field interfering with the
compass. Such interference may be caused by a
magnetic antenna ETP,QUYB~, magnetic note pad holder or a
similar magcetic item.
mr ine minor is set in zone eight upon leaving the kctory
It will be necessa-y tc adjust the compass to compensate
for compzss variance
if you live outside zone eight.
Under
certain circumstances, as during a long distance
cross-country trip, it wiHi be necessary to adjust ~QI-
compass variance. Compass variance is the difference
between
earth’s magnetic north and true geographic
north. If not adjusted to account for compass variance,
your compass could give false readings.
ProCarManuals.com
Page 120 of 426
3. Press the COMPASS button on the bottom of the
minor until the new zone number appears in the
display. After you stop pressing the button, the
display will shcw a compass direction within a few
seconds.
(This is the automatic calibration mode.
Drive in a circle to calibrate the mirror. See
“Compass Calibration” following.)
:~~~~;~~~~ .QEbT&GR
If the letter T9’ shsuM ever appear in tire compass
window, the mirror may need calibration.
The mirror can be calibrated in one of two ways:
Drive the vehicle in circles at 5 mph (8 knm/ha) or less
until the display reads a direction, OF
@ Drive the vehicle on your everyday routine.
ProCarManuals.com
Page 140 of 426
The tachometer tells you
how fast the engine is
running. it displays engine
speed in thousands sf
~CVQIU~~OIX per
minute (rp”).
ProCarManuals.com
Page 150 of 426
&~(-&jJ?-% _. _- &SD&$V 7- 0 7: \@+@--JQ) @ &-J~pp@.&) y-
_Y A dk A a
see things you need to see when it's dark outsside.
Be
sure to keep the HUD image dim and placed
EQW in YOUF field of view.
If your vehicle is equipped with the Wead-Up Display
(HUD), you can see some of the driver infomation that
appears
your irrstrumerat cluster.
The
infomation may be displayed in English or metric
units and appears as a reflection ir, the windshield. The
HLJD consists of the following information:
8 Speedometer Reading
0 Turn Signal Indicators
8 High-Beam Meadlamp Indicator
@ Check Gages Message The
Z-:UD shows these images when they are
lighted on
tke instrument pamS cluster.
Be sure to continue scanning your displays, controls and
driving environment
Just as you wouid in a vehicle
without XUD. If you sever hook at your instrt.merit
panel, you may got see something imgoI-aana, such as a
warning light.
ProCarManuals.com
