1997 SSANGYONG KORANDO transfer case

SSANGYONG MY2002
5D2-14 TRANSFER CASE (PART TIME - 4408)
4WD CHECK
Light
ON
OFF
4WD CHECK
Light
ON
OFFSelector Switch
Motor Position Sensor Defective Code No.
6
7
Malfunctioning Part
KAA5D190
KAA5D200

SSANGYONG MY2002
5D2-16 TRANSFER CASE (PART TIME - 4408)

y y

yyyyy yyyyy

yy yy
yy yy



yyyyyy yyyyyy
yyyyyy
yyyyyy


yyyy yyyy
yyyy




yyy yyy
yyy
yyy
yyy

yyyyyy yyyyyy yyyyyy

y y

yyyyy yyyyy yyyyy
yy
yyyy
yy yy
y
y y
yy
yy


yy yy
yy
yy yy
yyy
y
y y

y y yy
yy
yy

yyy yyy y y
yy yy
yy

yy yy
y

yy yy


yy yy
yy
yyyy
yyyyyyyyyy yyyyyyyyyy

yy yy
yy yy
y y

yy yy yy

yy yy

yyy yyy
y

y y
yy yy yy

yyy yyy
y y
yy
yy yy yy
yy yy yy y
yy yy


yy yy
yy

y
y


yyy yyy
yyy yyy
yyyyyyy
y
y
yy
yy yy
yy yy
yy




yyyyy yyyyy
yyyyy
yyyyy
yyyyy
yyyyy

yy yy

yy yy
y y
y

yy yy
y y

yy yy

yy yy
y y
COMTONENT LOCATOR
CROSS SECTIONAL VIEW
KAA5D250

TRANSFER CASE (PART TIME - 4408) 5D2-17
SSANGYONG MY2002
TRANSFER CASE ASSEMBLY
KAA5D260
1 Rear Companion Flange
2 Case Cover
3 Front Companion Flange
4 Breather Plug
5 Transfer Case
6 Input Shaft
7 Mounting Bolt8 Transmission Extension Housing
9 Bolt
10 Washer
11 Front Propeller Shaft
12 Bolt
13 Washer
14 Rear Propeller Shaft

SSANGYONG MY2002
5D2-18 TRANSFER CASE (PART TIME - 4408)
DISASSEMBLY AND ASSEMBLY
KAA5D370

TRANSFER CASE (PART TIME - 4408) 5D2-19
SSANGYONG MY2002
1 Transfer Case
2 Spring Washer
3 Oil Seal
4 Companion Flange
5 Shift shaft
6 Oil Seal
7 Pipe Plug
8 Screw
9 Bolt
10 Speed Sensor and Harness Bracket
11 Speed Sensor Assembly
12 Speed Sensor
13 O-Ring
14 Locking Clip
15 Connector
16 Motor Assembly
17 Oil Seal
18 Bearing
19 Bolt
20 Pump Assembly
21 Output Shaft Assembly
22 Bearing
23 Ring Gear
24 Cover Assembly
25 Nut
26 Snap Ring
27 Bearing
28 Needle Bearing
30 Clutch Coil Assembly
31 Speed Gear
32 Oil Seal
33 Return Spring
34 Magnet
35 Clutch Housing
36 Snap Ring (option)
37 Snap Ring
38 Lock-up Hub
39 Sleeve Return Spring
40 Lock-up Collar41 Rail Shaft
42 Lock-up Fork
43 Snap ring
44 Spacer
45 Driven Sprocket
46 Driving Sprocket
47 Drive Chain
48 Nut
49 Gasket
53 Spring Pin
54 Hose Clamp
55 Hose Coupling
56 Oil Strainer
58 Reduction Hub
59 Shift Fork Assembly
60 Shift Fork Facing
61 Roller and Retainer
66 Nut
67 Plane Washer
68 Oil Seal
71 Spacer
72 Front Output Assembly
73 Breather
74 Bolt
75 Front Adapter Assembly
76 Snap Ring
80 Snap Ring
81 Bearing
82 Input Shaft Assembly
83 Sleeve Assembly
84 Needle Bearing
86 Thrust Washer
87 Retaining Ring
88 Thrust Plate
89 Sun Gear
90 Gear Carrier Assembly
97 Electric Shift Cam
99 Spacer

SSANGYONG MY2002
5D2-20 TRANSFER CASE (PART TIME - 4408)

KAA5D220
ON-VEHICLE SERVICE
MAINTENANCE OF TRANSFER
CASE LUBRICANT
1. Oil Level Check
Clean the oil level plug and surrounding area.
Remove the oil level plug and check whether
oil is drip out or not.
Tighten the oil level plug.
Installation Notice
KAA5D230
MAINTENANCE AND REPAIR
2. Oil Change
Clean the oil level plug and surrounding area
Place a suitable container under the transfer
case.
Remove the oil and tighten the drain plug.
Installation Notice
Fill the oil through the oil level plug until oil
begins to drip out.
Tighten the oil level plug.
3. Cautions for oil level check and plugs tightening
Do not use an impact wrench to remove or
tighten the oil level plug or drain plug since this
will damage the threads in the transfer case.
Tightening Torque4 - 6 Nm
(35 - 53 lb-in)
Tightening Torque20 - 30 Nm
(15 - 22 lb-ft)

TRANSFER CASE (PART TIME - 4408) 5D2-21
SSANGYONG MY2002
KAA5D240
4H AND 4L INDICATOR
When the ignition switch turns on, 4H and 4L indicators
turn on for 0.6 seconds and turn off.
Notice: If 4H and 4L indicators do not turn on, check
the related bulb, the wiring harness and TCCU.
J1 - 7
J1 - 8
J1 - 13
J1 - 14
J1 - 15
J1 - 16
J1 - 17
J1 - 234H or 4L
2H
4H indicator light ON
4H indicator light OFF
2H or 4H
4L
Clutch pedal applied
Clutch pedal released
4L indicator light ON
4L indicator light OFF
Motor OFF
Motor ON
Motor OFF
Motor ON
Auto locking hub ON
Auto locking hub OFF
TCCU INSPECTION
4.75 - 5.35
0 - 0.50
< 1.00
> 11.00
4.75 - 5.35
0 - 0.50
< 0.50
> 11.00
< 1.00
> 11.00
< 1.00
> 11.00
< 1.00
> 11.00
> 11.00
< 1.00
Pin No. Voltage(V)Operation Condition
Notice:
DC 12V for the TCCU operation should be
maintained.
In case of J1-8 and J1-15, indicator light will turn
on for 0.6 second when turn the ignition switch ON.
If 4H and 4L indicator lights remain turned on when
turn the ignition switch on or during driving, perform
the TCCU diagnosis.

SSANGYONG MY2002
5D2-22 TRANSFER CASE (PART TIME - 4408)
KAA5D270
KAA5D280
TRANSFER CASE ASSEMBLY
1. Disconnect the negative terminal from the battery.
2. Lift up the vehicle and fix it safely.
3. Remove the damper mounting bolt.
4. Remove the drain plug and drain the oil.
Reinstall the drain plug.
Installation Notice
KAA5D290
5. Remove the breather hose.
6. Disconnect the speedometer cable connector and
other cable connectors and wiring harnesses.20 - 30 Nm
(15 - 22 lb-ft)
30 - 40 Nm
(22 - 30 lb-ft)
4 - 6 Nm
(35 - 53 lb-in)
Drain Plug Tightening
Torque
Damper Tightening
Torque
Fill plug Tightening
Torque