1997 SSANGYONG KORANDO remove seats

SSANGYONG MY2002
9H-6 SEATS
KAA9H120
KAA9H130
WALK IN DEVICE
Removal and Installation Procedure
1. Remove the front seat. Refer to “front seat” in this
section.
2. Remove the seat recliner. Refer to “seat recliner”
in this section.
3. Remove the seat trim. Refer to “seat trim” in this
section.
4. Remove the walk in device assembly.
5. Installation should follow the removal procedure
in the reverse order.
FRONT SEAT ARMREST
Removal and Installation Procedure
1. Remove the arm rest cover.
2. Remove the arm rest mounting bolt.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
3. Remove the arm rest.
4. Installation should follow the removal procedure
in the reverse order.
Tightening Torque17.6 - 25.5 Nm
(12 - 18 lb-ft)
KAA9H180
REAR SEAT ARMREST
Removal and Installation Procedure
1. Push the button in the arm rest.
2. Turn and remove from the side quarter trim panel.
3. Installation should follow the removal procedure
in the reverse order.

SEATS 9H-7
SSANGYONG MY2002


yyyy yyyy yyyy
KAA9H150
KAA9H160
3. Remove the bolts and the rear seat.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
4. Installation should follow the removal procedure
in the reverse order.
KAA9H140
REAR SEAT
Removal and Installation Procedure
1. Lift up the rear seat from the floor.
2. Remove the bolts.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
50/50 SPLIT REAR SEAT CUSHION
HINGE
Removal and Installation Procedure
1. Remove the bolts and the rear seat cushion hinge.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correctfasteners to prevent premature
corrosion.
2. Installation should follow the removal procedure
in the reverse order.
Tightening Torque19.6 - 31.4 Nm
(14.5 - 23.2 lb-ft)
Tightening Torque19.6 - 31.4 Nm
(14.5 - 23.2 lb-ft)
Tightening Torque34.3 - 53.9 Nm
(25 - 39 lb-ft)

SSANGYONG MY2002
9H-8 SEATS
50/50 SPLIT REAR SEAT CUSHION
LOCK STRIKER
Removal and Installation Procedure
1. Remove the bolts and rear seat cushion lock
striker.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
2. Installation should follow the removal procedure
in the reverse order.
KAA9H200
2. Remove the child seat anchorage bolt.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
3. Installation should follow the removal procedure
in the reverse order.
KAA9H190
CHILD SEAT ANCHORAGE
Removal and Installation Procedure
1. Remove the child seat anchorage cover.
Tightening Torque34.3 - 53.9 Nm
(25 - 39 lb-ft)
KAA9H170
Tightening Torque 19 Nm (14 lb-ft)

SSANGYONG MY2002
9Q-4 ROOF
KAA9Q030
SUN VISORS
Removal and Installation Procedure
1. Remove the screws and the sun visor from the
headliner.
KAA9Q020
UNIT REPAIR
FORMED HEADLINER
Removal and Installation Procedure
1. Remove the front and rear upper seat belt anchor.
Refer to Section 8A, Seat Belts.
2. Remove the assist handles. Refer to Section 9G,
Interior trim.
3. Remove the sun visors. Refer to “Sun visors” in
this section.
4. Remove the power sunroof control switch. Refer
to “Power Sunroof Control Switch” in this section.
5. Remove the interior courtesy lamp. Refer to Section
9B, Lighting system.
6. Remove the left and the right A-pillar trim panel.
7. Remove the upper quarter trim panel. Refer to
Section 9G, Interior Trim.
8. Remove the child seat anchor. Refer to Section
9H, Seats.
9. Remove the headliner.
10. Installation should follow the removal procedure
in the reverse order.
2. Remove the screw and the sun visor support from
the headliner.
3. Installation should follow the removal procedure
in the reverse order.
KAA9Q040

SSANGYONG MY2002
9S-4 BODY REAR END
ON-VEHICLE SERVICE
UNIT REPAIR
FUEL FILLER DOOR
Removal and Installation Procedure
1. Remove the bolts and the fuel filler door.
Installation Notice
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
2. Installation should follow the removal procedure
in the reverse order.
REPAIR INSTRUCTIONS
KAA9S020
KAA9S030
FUEL FILLER DOOR REMOTE
HANDLE AND CABLE
Removal and Installation Procedure
1. Remove the front seat. Refer to Section 9H, Seats.
2. Remove the front floor insulator.
3. Remove the screw with the fuel filler door remote
handle.
4. Remove the quarter trim panel. Refer to Section
9G, Interior Trim.
5. Disconnect the fuel filler door cable.
6. Installation should follow the removal procedure
in the reverse order.
Tightening Torque3.92 - 5.49 Nm
(2.92 - 4.08 lb-ft)