1997 Mercury Villager clock

Roadside Emergencies
259
*
[ER00615(ALL)01/96]
10-1/2 pica
art:0040173-B
Removing the spare tire retainer
*
[ER00620(ALL)01/96]
Stowing the spare tire
[ER00625(ALL)05/96]1.
To raise the tire to the stowed position, lay the tire on the
ground with the inboard side facing up. Install the retainer
through the wheel center and slide the tire under the vehicle.
Fit the hex-shaped end of the lug wrench over the hex nut
in the floor of the cargo area. Turn the lug wrench clockwise
until the tire is raised to its original position underneath the
vehicle.
[ER00630(ALL)01/96]
NOTE: The lug wrench ratchets when the tire is raised to the
stowed position. It will not allow you to over-tighten.
*
[ER00635(ALL)01/96]2.
Check for proper seating against the underbody supports
and retighten if necessary.
*
[ER00640(ALL)01/96]
RWARNING
Make sure the spare tire and jacking equipment are
stowed and secured in the proper storage location.
File:10vxern.ex
Update:Thu May 30 09:55:50 1996

Roadside Emergencies
263
[ER00700(ALL)05/96]
If you have optional cast-aluminum wheels, remove the wheel
cap to gain access to the lug nuts. Insert the tapered end of the
jack handle behind the notch in the wheel cap and gently pry it
off. To replace it, press it back on. You must line up the raised
circle on the back of the wheel cap with the indented area on
the wheel in order to press the wheel cap on.
[ER00705(ALL)01/96]
13-1/2 pica
art:0040181-B
Removing the optional wheel cap
*
[ER00710(ALL)01/96]4.
Fit the hex-shaped end of the lug wrench over the wheel lug
nuts and loosen them one-half turn (counterclockwise). Do
not remove the wheel lug nuts until you raise the tire off the
ground.
%*
[ER00715(ALL)01/96]
If your vehicle has the optional locking lug nuts, you must
use the lug nut removal tool provided with your vehicle's
tool kit.
File:10vxern.ex
Update:Thu May 30 09:55:50 1996

Roadside Emergencies
267
*
[ER00775(ALL)01/96]7.
Turn the lug nut wrench (attached to the jack handle)
clockwise to raise the vehicle off the ground.
*
[ER00780(ALL)01/96]8.
Remove the wheel lug nuts with the lug nut wrench.
*
[ER00785(ALL)01/96]9.
Remove the flat tire and replace it with the spare tire.
*
[ER00790(ALL)01/96]10.
Place the wheel lug nuts on the spare tire. Use the lug nut
wrench to screw the lug nuts snug against the wheel, but do
not tighten fully.
*
[ER00795(ALL)01/96]11.
Lower the vehicle by turning the jack handle
counterclockwise.
*
[ER00800(ALL)01/96]12.
Use the wheel lug wrench to tighten lug nuts in the
appropriate sequence. Re-check for complete tightness.
%*
[ER00805(ALL)01/96]
7-1/2 pica art:0040176-A
Lug nut tightening sequence
[ER00810(ALL)01/96]
The lug nuts should be tightened to 72-87 ft-lb (98-118 N%m).
File:10vxern.ex
Update:Thu May 30 09:55:50 1996

Maintenance and Care
291
*
[MC19100(ALL)05/96]
RWARNING
Never remove the coolant recovery cap while the engine
is running or hot.
*
[MC19200(ALL)05/96]
If you must remove the coolant recovery cap, follow these steps
to avoid personal injury caused by escaping steam or engine
coolant:
*
[MC19225(ALL)05/96]1.
Before you remove the cap, turn the engine off and let it
cool.
*
[MC19250(ALL)05/96]2.
When the engine is cool, wrap a thick cloth around the cap.
Slowly turn cap counterclockwise to the first stop.
*
[MC19275(ALL)05/96]3.
Step back while the pressure releases.
*
[MC19280(ALL)05/96]4.
When you are sure that all the pressure has been released,
use the cloth to press the cap down, turn it counterclockwise,
and remove it.
[MC19300(ALL)05/96]
Use Ford Premium Engine Coolant E2FZ-19549-AA (in Canada,
Motorcraft CXC-8-B) or an equivalent premium engine coolant
that meets Ford Specification ESE-M97B44-A. Ford Premium
Engine Coolant is an optimized formula that will protect all
metals and rubber elastomers used in Ford cooling systems for 4
years or 50,000 miles (80,000 km).
*
[MC19400(ALL)05/96]
Do not use alcohol or methanol antifreeze or any engine
coolants mixed with alcohol or methanol antifreeze. Do not use
supplemental coolant additives in your vehicle. These additives
may harm your engine cooling system.The use of an improper
coolant may void the warranty of your vehicle's engine cooling
system.
File:11vxmcn.ex
Update:Mon Jun 10 15:17:05 1996

Maintenance and Care
309
%*
[MC35000(ALL)01/96]
Filling the Fuel Tank
[MC35050(ALL)05/96]
Removing the tethered fuel cap
[MC35100(ALL)05/96]1.
Open the fuel door on the driver's side of the vehicle.
[MC35150(ALL)05/96]2.
Slowly unscrew the cap counterclockwise, using caution to
minimize the possibility of fuel spraying.
[MC35200(ALL)01/96]
10-1/2 pica
art:0040219-C
The tethered fuel cap
*
[MC35250(ALL)01/96]
If you lose the fuel cap, replace it with an authorized Motorcraft
or equivalent part.
%*
[MC35300(ALL)01/96
]
RWARNING
If you do not use the proper fuel cap, the pressure in the
fuel tank can damage the fuel system or cause it to work
improperly in a collision.
*
[MC35350(ALL)01/96]
RWARNING
The fuel system may be under pressure. If the fuel cap is
venting vapor or if you hear a hissing sound, wait until
it stops before completely removing the cap.
File:11vxmcn.ex
Update:Mon Jun 10 15:17:05 1996

Maintenance and Care
311
[MC36000(ALL)04/96]4.
Replace the fuel cap tightly when you are finished. Turn it
clockwise until you hear at least three clicks. The ratcheting
mechanism allows the fuel cap to be sealed without
overtightening.
*
[MC36050(ALL)01/96]5.
Push the fuel door closed.
%*
[MC36100(ALL)01/96
]
Choosing the Right Fuel
*
[MC36155(ALL)05/96]
Use only UNLEADED FUEL. The use of leaded fuel is
prohibited by law and could damage your vehicle. The damage
may not be covered by your warranty.
*
[MC36160(ALL)05/96]
Your vehicle was not designed to use fuel containing
manganese-based additives such as MMT. Additionally, vehicles
certified to California emission standards (indicated on the
underhood Vehicle Emissions Control Information label) are
designed to operate on California reformulated gasolines. If
California reformulated gasoline is not available when you
refuel, your vehicle can be operated on non-California fuels.
However, even though your engine will perform adequately on
other gasolines, the performance of the emission control devices
and systems may be adversely affected. Repair of damage
caused by using a fuel that your vehicle was not designed for
may not be covered by your warranty.
%*
[MC36250(ALL)04/96
]
Octane recommendation
*
[MC36310(ALL)03/96]
Your vehicle is designed to use regular gasoline with an
(R+M)/2 octane rating of 87. We do not recommend gasolines
labeled as ªregularº in high altitude areas that are sold with
octane ratings of 86 or even less.
File:11vxmcn.ex
Update:Mon Jun 10 15:17:05 1996

320
*
[MC40300(ALL)03/96]
Removing the headlamp bulb
*
[MC40400(ALL)01/96]1.
Make sure that the engine is off and the headlamp switch on
the instrument panel is in the OFF position.
[MC40500(ALL)01/96]2.
Remove the electrical connector from the bulb by pulling the
connector away from the bulb assembly.
[MC40600(ALL)01/96]
13-1/2 pica
art:0040222-B
The headlamp bulb assembly
[MC40700(ALL)01/96]3.
Remove the bulb retaining ring by turning it
counterclockwise 1/8 of a turn to free it from the socket.
Then slide the ring off the plastic base.Keep the ring.You
must use it again to hold the new bulb in place.
File:11vxmcn.ex
Update:Mon Jun 10 15:17:05 1996

389
Index
Clock.......................... 40
Cold engine starting.................. 212
Combination lap and shoulder belts.........131, 133
Controls, mirrors................... 110
Convenience kit in cargo area.............. 257
Coolant (see Engine coolant)
checking and adding................ 289
drain and flush................... 293
preparing for storage................ 338
specifications.................... 343
temperature gauge................ 18,23
warnings...................... 289
Cooling fan...................... 278
Customer Assistance Centre, Ford of Canada....... 356
D
Daytime running light system.............. 77
Defrost
rear window..................... 74
windshield...................... 56
Dipstick
automatic transaxle fluid............... 295
engine oil..................... 283
power steering fluid................. 293
Disabled vehicle (see Towing).............. 274
Dispute Settlement Board................ 352
Doors
door ajar warning light................ 15
lubricant specifications................ 343
Driving under special conditions
heavy load..................... 229
towing a trailer................... 230
File:vxixn.ex
Update:Fri Jun 14 07:38:49 1996