1997 Mercury Villager fog light

Controls and Features
57
[CF01100(ALL)01/96]
RWARNING
Operating with the function selector control in off or in
the recirculated air mode for extended periods of time in
cold weather can result in fog buildup on interior glass
surfaces.
[CF01200(ALL)01/96]
n
The Mix (P) button directs approximately equal amounts of
air to the windshield and floor outlets with a small amount
to the side windows.
[CF01300(ALL)01/96]
n
The Defrost (V) button directs air to the windshield with a
small amount going to the floor outlets.
[CF01400(ALL)03/96]
n
The Panel (Q) button directs air to the instrument panel
outlets.
[CF01500(ALL)01/96]
n
The Panel/Floor (S) button directs approximately equal
amounts of air to the instrument panel outlets and the floor
outlets.
[CF01600(ALL)01/96]
n
The Floor (R) button directs most of the system's air
supply to the floor outlets with a small amount going to the
windshield and side window defrosters.
[CF01700(ALL)01/96]
Air Outlets
[CF01800(ALL)01/96]
Air intake selector button
[CF01900(ALL)01/96]
The typical air intake selection is outside air. However, for
recirculated air, the air intake selector button may be activated.
When the air intake selector button is activated (indicator light
is on), it prevents the intake of outside air. This is the typical
selection when using the air conditioner (if equipped). It
recirculates interior air for faster cooling. The recirculated air
function also helps to prevent the intake of dusty or unpleasant
air.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

58
[CF02000(ALL)01/96]
There are several air outlets on the instrument panel. There are
side outlets near the driver's window and passenger's window,
two center outlets, floor outlets, and windshield outlets. The
direction and amount of air flow from the center and side
instrument panel outlets can be adjusted for personal comfort.
[CF02050(ALL)03/96]
NOTE: Selection of the recirculated air mode under cold and
humid conditions may result in window fogging due
to entrapped humidity within the vehicle. To
counteract this circumstance, switch to the Defrost
mode and set fan speed to 3 or 4. Adjust air
temperature to a ªwarmº instead of ªhotº setting and
deactivate the air intake selector.
[CF02100(ALL)04/96]
Heating Only System (Without air conditioning)
[CF02200(ALL)01/96]
You can heat and ventilate the inside of your vehicle, or defrost
the windshield with the function selector buttons, the fan speed
knob and the temperature control knob.
[CF02300(ALL)01/96]
An additional push-on/push-off air intake selector button
provides for the selection of recirculated inside air (button
lighted) or outside air (button not lighted).
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
71
[CF10200(ALL)01/96]
P
[CF10300(ALL)05/96]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window shows the set temperature. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
[CF10400(ALL)01/96]
V
[CF10500(ALL)01/96]
Press this button to obtain maximum airflow to the windshield.
Adjust the temperature setting as required for defrosting. The
Vindicator light illuminates and the display window shows
the set temperature. When the outside temperature is about50ÊF
(10ÊC) the air conditioning functions in order to dehumidify the
air to prevent window fogging.
[CF10600(ALL)01/96]
Q
[CF10700(ALL)05/96]
Push this button to select airflow through the instrument panel
registers. TheQindicator light illuminates and the display
window shows the set temperature. The ATC heats the air if the
selected temperature is warmer than the outside air coming into
the vehicle. However, the air is not cooled below the
temperature outside of the vehicle regardless of the temperature
setting unless the A/C button is pushed.
[CF10800(ALL)01/96]
S
[CF10900(ALL)05/96]
Push this button for air from the floor and instrument panel
registers at the same time. TheSindicator light illuminates
and the display window shows the set temperature. The ATC
heats the air if the selected temperature is warmer than the
outside air coming into the vehicle. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996