1997 MERCEDES-BENZ ML430 ignition

AD54.30-P-6000-06GH
Steering lock switch, testing electrical system

of IC
Model 163

t
A

Scope of test

Measuring instrument/

Test connection

Operation/

Requirement
Specified value
D
Possible cause/

Remedy

1.0
Steering lock switch

(S97/1)

o

A1

bL
14

(A.14)

Ignition:
OFF

Disconnect coupling "A"

(18-pin)

Steering locked

Steering unlocked

<
1
W

> 20 k
W
D
Cables

D
(S97/1)

Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AP46.00-P-4653GH
Checking tie rod and drag link joints for play and checking rubber boots
3.5.00

MODEL
163.113 /128 /136 /154 /157 /172 /174 /175

P46.40-0213-01

1g
Bellows

1h
Inner clamping ring

1i
Outer clamping ring

10
Tie rod

10i
Lock nut

10l
Tie rod end

P46.40-0212-01

1
Ignition
OFF


Checking

2
Check bellows (1g) by visual inspection as

follows:

- Jack up vehicle at front axle

- Stretch bellows by turning the steering to the

left and right while checking for damage

(cracks, chafe marks and dents)

Never check the bellows (1g) by pushing

in or bending the folds as this causes damage

to the plastic and leads to leaks in the long

term.

If necessary:
#
f

Replace bellows

AR46.40-P-0400GH

3
Check tie rod (10) for play

Check tie rod joints by pulling and pushing

firmly.

If necessary:
#
f

Replace track rods

AR46.40-P-0200GH

4
Check rubber boot of outer joint for leaks and

condition

If a rubber boot is leaking, replace tie rod

joint.

If necessary:
#
f

Replace track rods

AR46.40-P-0200GH

Copyright DaimlerChrysler AG 06.07.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR54.50-P-0001GH
Remove, install trip computer
17.12.98

MODEL
163.113 /128 /136 /154 /157 /172 /174 /175 with CODE (245) Trip computer

P54.50-0212-06

N41
Trip computer control module

P54.50-2030-06

1
Bolts

2
Overhead control panel

3
Connector

N41
Trip computer control module


Remove/install

1
Ensure that the ignition key is in position "0".

In order to prevent error codes.

AR54.10-P-0003A

2
Remove overhead control panel (2).

AR82.20-P-1100GH

3
Unscrew trip computer control module (N41)

from overhead control panel (2).

Unscrew screws (1) from control module.

4
Detach connector (3) from trip computer

control module (N41).

5
Install in the reverse order

6
Check that trip computer functions correctly.

Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

3
Features
This telephone system is fully integrated with your Mercedes-Benz audio system and steering wheel switches
*
. You can
scroll through the first 99 entries in your phone book and access the entire phone number memory; place, receive, and
terminate calls; change volume; and view call status (such as Ready, Dialing, Incoming Call, Call Active, No Service, Redial,
etc.). Because exact phone features are dependent on the particular audio system installed in your vehicle, detailed oper-
ation is covered in your audio system manual. Please refer to it.
Notes:
• In order for your Mercedes-Benz volume controls to work in conjunction with your Motorola phone (to change ringer
volume or adjust call volume), the vehicle must have either the engine running or the ignition key turned clockwise
to the last position before starting the engine.
• Your phone includes many new features that take additional time to initialize, resulting in increased power up/down
time. Please wait until the phone is completely powered up before using any feature from both the radio and phone
controls.
Finding Information on Phone Features
Your new Mercedes-Benz telephone operates in two modes:
•
Vehicular Mode
—when the phone is inserted and snapped into the privacy cradle in the vehicle
•
Portable Mode
—when the phone is operating as a stand alone device (NOT inserted and snapped into the privacy
cradle in the vehicle)
Most features of your new Mercedes-Benz telephone are available in both modes.
This guide contains basic information on using your phone in Vehicular Mode to place and receive calls.
* Not available on all models.

7
When in Vehicular Mode
In Vehicular Mode, the phone turns on automatically each time you turn on the vehicle ignition if the head unit is turned
on.
To turn off the phone, open the flip, and press P
. If your ignition is on when you turn your phone off, a flashing battery
icon and
Pwr

will appear in the display. While in this mode, calls cannot be placed or received. The next time the ignition is
turned on, the phone will turn on. To turn the phone back on, press P
again.
If your phone is on for more than five minutes when your vehicle’s ignition is off, the phone automatically turns itself off to
conserve your vehicle’s battery.
Switching Out of Vehicular Mode
To disengage your phone from Vehicular Mode:
To remove the cradle from the holder, press the release button on the holder.
NN N N
oo o o
tt t t
ee e e
::: :

If you switch out of Vehicular Mode during a call, the party on the other end will hear a click.
Step

Remove the phone from the cradle by pressing the black tab on the top of the cradle.
You can remove the phone with the cradle in or out of the holder.

AR82.30-P-6100GHRemoving and installing wiper arm
7.3.97

MODEL
163.113 /128 /136 /154 /157 /172 /174 /175

P82.30-0386-11

1
Protective cap

2
Nut


Remove/install

Danger!

Injury hazard
by trapping or crushing, in

extreme cases with loss of limbs when

reaching into windshield wiper mechanism
Always remove ignition key when working on

windshield wiper mechanism.

AS82.30-Z-0001-01A

1
Ensure that wiper motor is in park position

2
Open protective cap (1)

3
Unscrew nut (2)


*BA82.30-P-1002-01C

4
Take off wiper arm


Hold wiper arm on mounting section to

avoid hitting against windshield.

5
Install in the reverse order


Windshield wipers

Number

Designation
Model

Series 163

BA82.30-P-1002-01C
Nut for wiper arm on windshield
Nm
18

Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AR82.30-P-6400GH
Remove/install wiper system
3.3.97

MODEL
163.113 /128 /136 /154 /157 /172 /174 /175

P82.30-0393-06

1
Nuts

2
Wiper system

3
Connector

M6/1
Wiper motor


Remove/install

Danger!

Injury hazard
by trapping or crushing, in

extreme cases with loss of limbs when

reaching into windshield wiper mechanism
Always remove ignition key when working on

windshield wiper mechanism.

AS82.30-Z-0001-01A

1
Ensure that wiper motor is in park position

2
Remove cover on air intake

AR83.25-P-1405GH

3
Unscrew nuts (1) on wiper arm

4
Lift wiper system (2)

5
Disconnect connector (3) from the wiper

motor (M6/1)

6
Remove wiper system (2)

7
Install in the reverse order

Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1