CLUTCH 7C-37
REASSEMBLY
* Apply grease
(COSMO rubber grease)
Reassembly Steps
1. Cylinder body
2. Spring
3. Piston and piston cup4. Push rod
5. Boot
6. Solenoid switch
Important Operations
1. Cylinder Body
1) Clean the cylinder body.
2) Apply brake fluid to the cylinder bore.
3. Piston and piston Cup
1) Apply brake fluid to the piston and piston cup.
2) Install the cups to the piston.
Note the installation direction of the piston cups in the
illustration.
3) Install the piston and piston cup to the cylinder body.
