1997 FORD F SERIES MOTORHOME AND COMMERCIAL CHASSIS reset

20 %
*
[IS11900( ALL)01/96]
Odometer/Trip Odometer
*
[IS12000( ALL)01/96]
The Liquid Crystal Display (LCD) odometer is a
combination trip odometer and total odometer.
The total odometer is normally displayed. To see
the trip odometer, press and release the SELECT
button on the upper right side of the
speedometer. To zero out the trip odometer,
press and release the RESET button on the
upper left side of the speedometer while the trip
odometer is displayed. If the trip odometer is
displayed, press and release the SELECT button
to return the display to the total odometer value.
File:03ltism.ex
Update:Fri Dec 13 11:17:22 1996

32
*
[CF33300( ALL)01/96]
NOTE: If your speed increases above your set
speed while driving inj(Overdrive)
on a downhill grade, you may want to
depress the transmission control switch
located on the shift lever to turn off
overdrive to reduce vehicle speed.
Speed control cannot reduce the vehicle
speed if it goes above your set speed
on a downhill grade. For the best fuel
economy during normal driving
conditions, leave the shift select inj
(Overdrive), or resume as soon as
practical.
*
[CF33400( ALL)01/96]
RWARNING
Do not use the speed control in heavy
traffic or on roads that are winding,
slippery, or unpaved.
*
[CF33500( ALL)01/96]
In mountainous areas, at higher elevations, or
when pulling a trailer, the speed control may
not be able to maintain the preset speed with
the transmission inj(Overdrive).
*
[CF33800( ALL)01/96]
RWARNING
Do not shift the transmission into N
(Neutral) with the speed control on.
*
[CF33900( ALL)01/96]
To maintain a preset speed under the above
conditions, with electronically controlled
transmissions Ð press the Transmission Control
Switch. The indicator light will turn on and
illuminate the word ªOFF.º This will cancel
ªOverdriveº. You can press the Transmission
Control Switch on or off at any speed. For the
best fuel economy during normal driving
conditions, press the Transmission Control
Switch to turn off the light. This allows
overdrive operation. After the vehicle has been
stopped and the engine has been restarted, the
File:05ltcfm.ex
Update:Thu Dec 12 13:31:05 1996

33
transmission will automatically reset with
overdrive operation. To cancel overdrive you
must press the Transmission Control Switch
again.
*
[CF34000( ALL)01/96]
quarter page art:0020771-C
Transmission control switch and Indicator light
%*
[CF34100( ALL)01/96]
Accelerating With the Speed Control
Operating
*
[CF34200( ALL)01/96]
You can use the accelerator pedal to speed up
momentarily. When you take your foot off the
accelerator, the vehicle will return to the set
speed.
%*
[CF34300( ALL)01/96]
Resetting the Speed Control
*
[CF34400( ALL)01/96]
To reset the speed control to alower speed,
press and hold the COAST switch. Let your
vehicle slow down to the desired speed and
release the COAST switch.
*
[CF34500( ALL)01/96]
Your vehicle has a ªtap-downº feature that
allows you to decrease your current speed in
increments of 1 mph (1.6 km/h) by a
momentary tap of the COAST switch. Multiple
taps of the COAST switch will decrease your
vehicle speed 1 mph (1.6 km/h) for each tap.
For example, if you are currently set at 65 mph
(104 km/h) and tap the COAST switch 5 times
your vehicle speed will decrease and set at
60 mph (96 km/h).
File:05ltcfm.ex
Update:Thu Dec 12 13:31:05 1996

34
*
[CF34600( ALL)01/96]
To reset the speed control to ahigher speed,
you can follow any of these procedures:
*
[CF34700( ALL)01/96]
q
Accelerate to the desired speed using the
accelerator pedal, then press the SET ACCEL
switch and release it immediately.
*
[CF34800( ALL)01/96]
q
Press and hold the SET ACCEL switch until
the vehicle accelerates to the desired speed,
then release the switch.
*
[CF35000( ALL)01/96]
Turning the Speed Control Off
*
[CF35100( ALL)01/96]
You can cancel the speed control while you are
driving.
*
[CF35200( ALL)01/96]
q
Press the OFF switch. The speed control is
off. If you want to resume speed control,
press the ON switch and reset the speed
control by pressing the SET ACCEL button.
[CF35400( ALL)01/96]
q
Press the brake pedal slightly. The speed
control is suspended, but you can reset it by
pressing SET ACCEL or return to the
previous set speed with the RESUME switch.
*
[CF35500(BE M)01/96]
In addition, the speed control is turned off each
time you turn the vehicle ignition off.
*
[CF35600( ALL)01/96]
Driving uphill or on a steep grade
*
[CF35700( ALL)01/96]
When the speed control is on, your vehicle may
significantly drop speed when driving uphill,
especially with a heavy load. If the speed drops
more than 8 to 14 mph (15 - 25 km/h) the
automatic speed control will, by design, be
canceled. You may have to temporarily resume
manual speed control while driving up a steep
grade in order to maintain the speed you desire.
*
[CF35800( ALL)01/96]
Frequent shifting of an automatic transmission or
speed loss during speed control operation can be
eliminated by shifting out of overdrive into
drive (or by pressing the Transmission Control
Switch, if equipped). These conditions could
occur in hilly terrain or at higher elevations.
File:05ltcfm.ex
Update:Thu Dec 12 13:31:05 1996

35
*
[CF35900( ALL)01/96]
If the speed control ªdropped outº after your
climb is completed, the speed of your vehicle
can be reset with the SET ACCEL switch, or
returned to the previous set speed with the
RESUME switch, as long as you are driving over
30 mph (50 km/h).
*
[CF36000( ALL)01/96]
Cancelling and Resuming a Set Speed
*
[CF36100( ALL)01/96]
If you press the brake pedal, the speed control is
cancelled. You can return to the speed you set
by using the RSM switch, as long as you did not
press the OFF switch.
*
[CF36200( ALL)01/96]
To resume the speed you had before, you must
be driving at least 30 mph (50 km/h).
*
[CF36300( ALL)01/96]
Press and release the RESUME switch. Your
vehicle gradually returns to the previously set
speed and then maintains it.
*
[CF36400( ALL)01/96]
RWARNING
Do not use the speed control in heavy
traffic or on roads that are winding,
slippery, or unpaved.
File:05ltcfm.ex
Update:Thu Dec 12 13:31:05 1996

41
*
[TO04600( ALL)01/96]
For cold or warm engines:
*
[TO04700( ALL)01/96]
If the engine still does not start after two
attempts:
*
[TO04800( ALL)01/96]
1. Turn the ignition key to the OFF position.
*
[TO04900( ALL)01/96]
2. Press the accelerator all the way to the floor
and hold it.
*
[TO05000( ALL)01/96]
3. Turn the ignition key to the START position.
*
[TO05100( ALL)01/96]
4. Release the ignition key when the engine
starts.
*
[TO05200( ALL)01/96]
5. Release the accelerator gradually as the
engine speeds up. Then drive away in the
normal manner.
*
[TO05300( ALL)01/96]
If the engine still does not start, the fuel pump
shut-off switch may have been triggered. For
directions on how to reset the switch seeFuel
Pump Shut-Off Switchin the index.
[TO05400( M)01/96]
NOTE: When turning the ignition key from
the ªOFFº to the ªRUNº position, a
subtle humming may be heard for up
to three seconds. This is the normal
sound of an electronically controlled
fuel pump, and indicates the operation
or pre-pressurizing the EFI system for
starting.
*
[TO05600( ALL)01/96]
If the engine idle speed does not slow down
automatically, do not allow your vehicle to idle
for more than 10 minutes. Have the vehicle
checked.
*
[TO05700( ALL)01/96]
RWARNING
Extended idling at high engine speeds can
produce very high temperatures in the
engine and exhaust system, creating the
risk of fire or other damage.
File:08lttom.ex
Update:Fri Dec 13 11:22:15 1996

77
Roadside Emergencies
%*
[ER00205( ALL)01/96]
If the Engine Cranks but Does
Not Start or Does Not Start After
a Collision
*
[ER00210( ALL)01/96]
Fuel Pump Shut-Off Switch
*
[ER00220( ALL)01/96]
If the engine cranks but does not start or does
not start even after a small collision, the fuel
pump shut-off switch may have been activated.
The shut-off switch is a device intended to stop
the fuel pump when your vehicle has been
involved in a substantial jolt.
*
[ER00225( ALL)01/96]
Once the shut-off switch is activated, you must
reset the switch by hand before you can start
your vehicle.
[ER00235( M)01/96]
one third page art:0020006-B
Fuel pump shut-off switch location
File:10lterm.ex
Update:Fri Dec 13 11:23:45 1996

78
*
[ER00250( ALL)01/96]
RWARNING
If you see or smell fuel, do not reset the
switch or try to start your vehicle. Have
all the passengers get out of the vehicle
and call the local fire department or a
towing service.
*
[ER00252( ALL)01/96]
If your engine cranks but does not start after a
collision or substantial jolt:
*
[ER00255( ALL)01/96]
1. Turn the ignition key to the OFF position.
*
[ER00260( ALL)01/96]
2. Check under the vehicle for leaking fuel.
*
[ER00265( ALL)01/96]
3. If you do not see or smell fuel, push the red
reset button down. If the button is already
set, you may have a different mechanical
problem.
[ER00275( M)01/96]
4. Turn the ignition key to RUN for a few
seconds, then turn it OFF. (Do not start the
engine.)
*
[ER00280( ALL)01/96]
5. Check under the vehicle again for leaking
fuel.If you see or smell fuel, do not start
your vehicle again.If you do not see or
smell fuel, you can try to start your vehicle
again.
[ER00285( ALL)01/96]
6. Check all vehicle warning lights before
driving your vehicle.
[ER00295( M)01/96]
quarter page art:0020107-A
Reset button for fuel pump shut-off switch
File:10lterm.ex
Update:Fri Dec 13 11:23:45 1996