Page 201 of 236
them. If this does not work,
remove the chains to prevent
vehicle damage.
²Avoid overloading your vehicle.
²Remove the tire chains when
they are no longer needed. Do
not use chains on dry roads.
²The suspension insulation and
bumpers will help prevent
vehicle damage. Do not remove
these components from the
vehicle when using snow tires
and chains.
If equipped with 110 cm (17 inch)
tires, your vehicle will not
accommodate snow chains. Consult
your dealer for information on
other Ford approved methods of
traction control.
IMPORTANT FUEL
INFORMATION
Important safety precautions
Do not overfill the fuel
tank. The pressure in an
overfilled tank may cause
leakage and lead to fuel spray
and fire.
If you do not use the
proper fuel cap, the
pressure in the fuel tank can
damage the fuel system or cause
it to work improperly in a
collision.
uno_fuel_info_title
com_important_precautions.06
Maintenance and care
202 
     
        
        Page 202 of 236

The fuel system may be
under pressure. If the fuel
cap is venting vapor or if you
hear a hissing sound, wait until it
stops before completely
removing the cap.
Automotive fuels can
cause serious injury or
death if misused or mishandled.
Observe the following guidelines
when handling automotive fuel:
²Extinguish all smoking materials
and any open flames before
fueling your vehicle.
²Always turn off the vehicle
before fueling.
²Automotive fuels can be harmful
or fatal if swallowed. If fuel is
swallowed, call a physician
immediately, even if no
symptoms are immediately
apparent. The toxic affects of
fuel may not be visible for
hours.
²Fuels can also be harmful if
absorbed through the skin. If
fuel is splashed on the skin,
promptly remove contaminated
clothing and wash skin
thoroughly with soap and water.
²If fuel is splashed in the eyes,
remove contact lenses, flush
with water for 15 minutes and
seek medical attention.
²Be particularly careful if you are
taking ªAntabuseº or other
Maintenance and care
203 
     
        
        Page 221 of 236

MOTORCRAFT PART NUMBERS
Component 4.0L EFI
engine4.0L SOHC
engine5.0L engine
Air filter FA-1616 FA-1658 FA-1658
Fuel filter FG-872 FG-872 FG-872
Battery
(standard)BXT-58 BXT-58 BXT-65-650
Battery
(optional)BXT-65-650 BXT-65-650 BXT-65-850
Oil filter FL-1A FL-1A FL-820S
PCV valve EV-225 EV-225 EV-152
Spark plug
1AGSF-22PP2AGSF-22PP2AWSF-32EE3
1
Refer to the Vehicle Emission
Control Information (VECI) decal
in the engine for gap
specifications. If a spark plug must
be replaced, use only spark plugs
with the service number suffix
letter EE as shown on the engine
decal.
2If a spark plug is removed for
inspection, it must be reinstalled in
the same cylinder. Cylinder
numbers 1, 2, 3 have a PG suffix.
Cylinder numbers 4, 5, 6 have a P
suffix.
3If a spark plug is removed for
inspection it must be reinstalled in
the same cylinder. Cylinder
numbers 1, 2, 3, 4 have an EG
suffix. Cylinder numbers 5, 6, 7, 8
have an E suffix.
com_explorer-part-numbers
Capacities and specifications
222 
     
        
        Page 224 of 236
in water. For Traction-Lok rear
axles, add 4 ounces of additive
friction modifier C8AZ-19B546-A,
Ford specification EST-M2C118±A,
whenever the lubricant is changed.
4Refer to your ªService Guideº for
axle fluid change intervals.
SPECIFICATIONS
Lubricant specifications
ItemFord Part
NameFord Part
NumberFord
Specification
Windshield
washer fluid
reservoirFord Ultra-Clear
Windshield
Washer Fluid
ConcentrateC9AZ-19550-AA
OR -BAESR-M17P5-A
Body hinges,
latches, door
stricker plates
and rotors, seat
tracks, fuel filler
door hinge and
spring, hood
latch, auxiliary
latchMulti-Purpose
GreaseD7AZ-19584-AA
OR
D0AZ-19584-AAESR-M1C159-A
AND
ESB-M1C93-B
Steering column
u-joints, parking
brake linkage
pivots and
clevises,
transmission
control and
clutch linkage
pivotsPremium Life
Long GreaseXG-1-C ESA-M1C75-B
uno_special_lube_specs
uno_lubricants
Capacities and specifications
225 
     
        
        Page 227 of 236
3Add 4±ounces of additive friction
modifier C8AZ-19B546±A, Ford
specification EST-M2C118±A, for
complete Traction-lok rear axles.
ENGINE DATA
Engine 4.0L 2V V-64.0L 2V V-6
SOHC5.0L 2V V-8
Cubic inches 245 245 302
Horsepower 160 @ 4200 rpm 205 @ 5000 rpm 211 @ 4600
Torque 225 @ 2800 rpm 250 @ 3000 rpm 274 @ 3200 rpm
Required fuel
grade87 octane 87 octane 87 octane
Firing order 1-4-2-5-3-6 1-4-2-5-3-6 1-3-7-2-6-5-4-8
Spark plug gap 1.3-1.4 mm
(0.052-0.056
inch)1.3-1.4 mm
(0.052-0.056
inch)1.3-1.4 mm
(0.052-0.056
inch)
Ignition system DIS DIS DIS
VEHICLE DIMENSIONS
Dimensions cm(inches)
1Overall length 468 cm (184.3 in)
2Overall width 187 cm (70.2 in)
3Maximum height 170 cm (67.3 in)
4Wheelbase 284 cm (111.9 in)
5Front track / rear 148 cm (58.3 in)
uno_engine_data
uno_vehicle_dimensions
Capacities and specifications
228 
     
        
        Page 236 of 236
FILLING STATION
INFORMATION
FuelUnleaded fuel only- Octane 87
Fuel tank capacity (2 door) 66.2 L (17.3 gallons)
Fuel tank capacity (4 door) 79.5 L (20.8 gallons)
Engine oil Use only engine oil displaying the
American Petroleum Institute
certification mark. SAE 5W-30 is
preferred.
Tire size and pressure Refer to the SCC label for tire
specifications.
Hood release Pull handle under the left side of the
instrument panel.
uno_filling_station
Filling station information
240