BR0RO-03
BR4213
BR4214
BR0272
- BRAKEFRONT BRAKE PAD
BR-21
1996 TERCEL (RM440U)
REPLACEMENT
1. REMOVE FRONT WHEEL
Remove the wheel and temporarily fasten the disc with hub
nuts.
2. INSPECT PAD LINING THICKNESS
Check the pad thickness through the caliper inspection hole
and replace the pads if they are not within the specification.
Minimum thickness: 1.0 mm (0.039 in.)
3. REMOVE CALIPER
(a) Remove the 2 installation bolts from the torque plate.
(b) Remove the caliper and suspend it securely.
HINT:
Do not disconnect the flexible hose.
4. REMOVE THESE PARTS:
(a) 2 brake pads
(b) 3 anti-squeal shims
(c) Pad wear indicator plate
(d) 4 pad support plates
NOTICE:
The support plates can be used again provided that they
have sufficient rebound, no deformation, cracks or wear,
and have had all rust, dirt and foreign particles cleaned off.
5. CHECK DISC THICKNESS AND RUNOUT
(See page BR-26)
6. INSTALL 4 PAD SUPPORT PLATES
7. INSTALL NEW PADS
NOTICE:
When replacing worn pads, the anti-squeal shims and
wear indicator plates must be replaced together with the
pads.
(a) Install a pad wear indicator plate on the inner pad.
(b) Apply disc brake grease to the anti-squeal shims (See
page BR-23).
(c) Install the 2 anti-squeal shims on the outer pad.
(d) Install the anti-squeal shim on the inner pad
