1996 TOYOTA T100 engine coolant

Downloaded from www.Manualslib.com manuals search engine EM1OO−01
P20830
− ENGINE MECHANICAL (5VZ−FE)TIMING BELT
EM−13
1996 TOYOTA T100 (RM449U)
REMOVAL
1. 4WD:
REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT
3. DISCONNECT UPPER RADIATOR HOSE
4. REMOVE DRIVE BELT FOR PS PUMP
5. w/ A/C:
REMOVE DRIVE BELT FOR A/C COMPRESSOR
6. REMOVE DRIVE BELT FOR GENERATOR
7. REMOVE NO. 2 FAN SHROUD
8. REMOVE FAN WITH FLUID COUPLING AND FAN PUL-
LEYS
9. DISCONNECT PS PUMP FROM ENGINE
HINT:
Put aside the pump, and suspend it.
10. w/ A/C:
DISCONNECT A/C COMPRESSOR FROM ENGINE
HINT:
Put aside the compressor, and suspend it.
11. w/ A/C:
REMOVE A/C COMPRESSOR BRACKET
12. REMOVE NO.2 TIMING BELT COVER
(a) Disconnect the camshaft position sensor connector from
the No.2 timing belt cover.
(b) Disconnect the 3 high−tension cord clamps from the No.2
timing belt cover.
(c) Remove the 6 bolts, and timing belt cover.
13. REMOVE FAN BRACKET
(a) Remove the nut and PS pump adjusting strut.
(b) Remove the bolt, nut, and fan bracket.

Downloaded from www.Manualslib.com manuals search engine EM−24
− ENGINE MECHANICAL (5VZ−FE)TIMING BELT
1996 TOYOTA T100 (RM449U)
16. w/ A/C:
INSTALL A/C COMPRESSOR BRACKET
17. w/ A/C:
CONNECT A/C COMPRESSOR TO ENGINE
18. CONNECT PS PUMP TO ENGINE
19. INSTALL FAN WITH FLUID COUPLING AND FAN PUL-
LEYS
Torque:5.4 N·m (54 kgf·cm, 48 in.·lbf)
20. INSTALL NO.2 FAN SHROUD
21. INSTALL AND ADJUST DRIVE BELT FOR GENERA-
TOR (See page CH−1)
22. w/ A/C:
INSTALL AND ADJUST DRIVE BELT FOR A/C COM-
PRESSOR
23. INSTALL AND ADJUST DRIVE BELT FOR PS PUMP
24. CONNECT UPPER RADIATOR HOSE
25. FILL ENGINE WITH COOLANT
26. START ENGINE CHECK FOR LEAKS
27. 4WD:
INSTALL ENGINE UNDER COVER
28. ROAD TEST VEHICLE
Check for abnormal noise, shock, slippage, correct shift points
and smooth operation.
29. RECHECK ENGINE COOLANT LEVEL

Downloaded from www.Manualslib.com manuals search engine EM1OP−01
EM−30
− ENGINE MECHANICAL (5VZ−FE)CYLINDER HEAD
1996 TOYOTA T100 (RM449U)
REMOVAL
1. 4WD:
REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT
3. REMOVE FRONT EXHAUST PIPE (See page EM−108)
4. REMOVE AIR CLEANER CAP, MAF METER AND RES-
ONATOR
5. DISCONNECT THESE CABLES:
(a) w/ Cruise control:
Cruise control actuator cable
(b) Accelerator cable
(c) A/T:
Throttle cable
6. DISCONNECT HEATER HOSE
7. DISCONNECT UPPER RADIATOR HOSE
8. REMOVE DRIVE BELT FOR PS PUMP
(a) Stretch the belt and loosen the fan pulley mounting nuts.
9. w/ A/C:
REMOVE DRIVE BELT FOR A/C COMPRESSOR
10. REMOVE DRIVE BELT FOR GENERATOR
11. REMOVE NO. 2 FAN SHROUD
12. REMOVE FAN WITH FLUID COUPLING AND FAN PUL-
LEYS
13. DISCONNECT PS PUMP FROM ENGINE
HINT:
Put aside the pump, and suspend it.
14. w/ A/C:
DISCONNECT A/C COMPRESSOR FROM ENGINE
HINT:
Put aside the compressor, and suspend it.
15. w/ A/C:
REMOVE A/C COMPRESSOR BRACKET
16. REMOVE HIGH−TENSION CORDS WITH IGNITION
COILS
17. REMOVE SPARK PLUGS
18. REMOVE TIMING BELT AND CAMSHAFT TIMING
PULLEYS (See page EM−13)
19. REMOVE TIMING BELT IDLER NO. 2 (See page
EM−13)
20. REMOVE GENERATOR

Downloaded from www.Manualslib.com manuals search engine − ENGINE MECHANICAL (5VZ−FE)CYLINDER HEAD
EM−61
1996 TOYOTA T100 (RM449U)
27. INSTALL TIMING BELT IDLER NO. 2 (See page
EM−19)
28. INSTALL CAMSHAFT TIMING PULLEYS AND TIMING
BELT (See page EM−19)
29. INSTALL SPARK PLUGS
30. INSTALL HIGH−TENSION CORDS WITH IGNITION
COILS (See page IG−1)
31. w/ A/C:
INSTALL A/C COMPRESSOR BRACKET
32. w/ A/C:
CONNECT A/C COMPRESSOR
33. CONNECT PS PUMP
34. INSTALL FAN WITH FLUID COUPLING AND FAN PUL-
LEYS
Torque: 5.4 N·m (54 kgf·cm, 48 in.·lbf)
35. INSTALL NO. 2 FAN SHROUD
36. INSTALL AND ADJUST DRIVE BELT FOR GENERA-
TOR (See page CH−1)
37. w/ A/C:
INSTALL AND ADJUST DRIVE BELT FOR A/C COM-
PRESSOR
38. INSTALL AND ADJUST DRIVE BELT FOR PS PUMP
39. CONNECT HEATER HOSE AND UPPER RADIATOR
HOSE
40. CONNECT THESE CABLES:
(a) A/T:
Throttle cable
(b) Accelerator cable
(c) w/ Cruise control:
Cruise control actuator cable
41. I N S TA L L M A F M E T E R , R E S O N ATO R A N D A I R
CLEANER CAP ASSEMBLY
42. INSTALL FRONT EXHAUST PIPE (See page EM−108)
43. FILL WITH ENGINE COOLANT
44. START ENGINE AND CHECK FOR LEAKS
45. CHECK IGNITION TIMING (See page EM−9)
46. 4WD:
INSTALL ENGINE UNDER COVER
47. ROAD TEST VEHICLE
Check for abnormal noise, shock, slippage, correct shift points
and smooth operation.
48. RECHECK ENGINE COOLANT LEVEL

Downloaded from www.Manualslib.com manuals search engine EM06W−02
− ENGINE MECHANICAL (5VZ−FE)ENGINE UNIT (2WD)
EM−65
1996 TOYOTA T100 (RM449U)
REMOVAL
1. DRAIN ENGINE COOLANT
2. DRAIN ENGINE OIL
3. DRAIN TRANSMISSION OIL
4. REMOVE HOOD
5. REMOVE RADIATOR ASSEMBLY
(See page CO−16)
6. REMOVE DRIVE BELT FOR PS PUMP
7. w/ A/C:
REMOVE DRIVE BELT FOR A/C COMPRESSOR
8. REMOVE DRIVE BELT FOR GENERATOR
9. REMOVE FAN WITH FLUID COUPLING AND FAN PUL-
LEYS
(See page CO−5)
10. DISCONNECT PS PUMP FROM ENGINE
HINT:
Put aside the pump, and suspend it.
11. w/ A/C:
REMOVE A/C COMPRESSOR FROM ENGINE
HINT:
Put aside the compressor, and suspend it.
12. REMOVE AIR CLEANER CAP, MAF METER AND RES-
ONATOR
13. REMOVE AIR CLEANER CASE AND FILTER
14. DISCONNECT THESE CABLES:
(a) w/ Cruise control:
Cruise control actuator cable
(b) Accelerator cable
(c) A/T:
Throttle cable
15. DISCONNECT HEATER HOSES
16. DISCONNECT HOSES
Disconnect these hoses:
(1) Brake booster vacuum hose
(2) EVAP hose

Downloaded from www.Manualslib.com manuals search engine EM−72
− ENGINE MECHANICAL (5VZ−FE)ENGINE UNIT (2WD)
1996 TOYOTA T100 (RM449U)
25. w/ A/C:
INSTALL DRIVE BELT FOR A/C COMPRESSOR
26. INSTALL DRIVE BELT FOR PS PUMP
27. INSTALL RADIATOR ASSEMBLY
(See page CO−19)
28. FILL WITH ENGINE OIL
29. FILL WITH ENGINE COOLANT
30. FILL TRANSMISSION OIL
31. START ENGINE AND CHECK FOR LEAKS
32. CHECK IGNITION TIMING
(See page EM−9)
33. INSTALL HOOD
34. ROAD TEST VEHICLE
Check for abnormal noise, shock, slippage, correct shift points
and smooth operation.
35. RECHECK ENGINE COOLANT AND OIL LEVELS

Downloaded from www.Manualslib.com manuals search engine EM1OU−01
EM−76
− ENGINE MECHANICAL (5VZ−FE)ENGINE UNIT (4WD)
1996 TOYOTA T100 (RM449U)
REMOVAL
1. REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT
3. DRAIN ENGINE OIL
4. REMOVE HOOD
5. REMOVE RADIATOR ASSEMBLY
(See page CO−16)
6. REMOVE DRIVE BELT FOR PS PUMP
7. w/ A/C:
REMOVE DRIVE FOR A/C COMPRESSOR
8. REMOVE DRIVE BELT FOR GENERATOR
9. REMOVE FAN WITH FLUID COUPLING AND FAN PUL-
LEYS (See page EM−13)
10. DISCONNECT PS PUMP FROM ENGINE
HINT:
Put aside the pump, and suspend it.
11. w/ A/C:
DISCONNECT A/C COMPRESSOR
HINT:
Put aside the compressor, and suspend it.
12. REMOVE AIR CLEANER CAP, MAF METER AND RES-
ONATOR
13. REMOVE AIR CLEANER CASE AND FILTER
14. DISCONNECT THESE CABLES:
(a) w/ Cruise control:
Cruise control actuator cable
(b) Accelerator cable
(c) A/T:
Throttle cable
15. DISCONNECT HEATER HOSES
16. DISCONNECT HOSES
Disconnect these hoses:
(1) Brake booster vacuum hose
(2) EVAP hose
(3) A.D.D. vacuum hose

Downloaded from www.Manualslib.com manuals search engine − ENGINE MECHANICAL (5VZ−FE)ENGINE UNIT (4WD)
EM−81
1996 TOYOTA T100 (RM449U)
16. w/ A/C:
INSTALL DRIVE BELT FOR A/C COMPRESSOR
17. INSTALL DRIVE BELT FOR PS PUMP
18. INSTALL RADIATOR ASSEMBLY
(See page CO−19)
19. FILL WITH ENGINE OIL
20. FILL WITH ENGINE COOLANT
21. INSTALL ENGINE UNDER COVER
22. INSTALL TRANSMISSION
(See page MT−4)
23. INSTALL HOOD
24. PERFORM ROAD TEST
Check for abnormal noise, shock, slippage, correct shift points
and smooth operation.
25. RECHECK ENGINE COOLANT AND ENGINE OIL
LEVELS