Downloaded from www.Manualslib.com manuals search engine TR0CY−02
TF0626
Breather Hose
Transmission Side Transfer Side
TF0633
TF0655
TF0654
− TRANSFERTRANSFER UNIT
TR−3
1383 Author: Date:
1996 TOYOTA T100 (RM449U)
TRANSFER UNIT
REMOVAL
1. REMOVE TRANSFER WITH TRANSMISSION
M/T (See page MT−7)
A/T (See page AT−34)
HINT:
At the time of installation, shift the 2 shift fork shafts to the H4
position.
2. A/T:
REMOVE BREATHER HOSE
Disconnect the breather hose from transfer upper cover and
transmission control retainer.
Hose depth: 13 mm (0.51 in.) or more
3. REMOVE DYNAMIC DAMPER
Remove the 2 bolts and dynamic damper.
Torque: 37 N·m (380 kgf·cm, 27 ft·lbf)
4. REMOVE ENGINE REAR MOUNTING
Remove the 4 bolts and engine rear mounting from the trans-
mission.
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
5. REMOVE PROPELLER SHAFT UPPER DUST COVER
AND TRANSFER FROM TRANSMISSION
(a) Remove the dust cover bolt from the bracket.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
(b) Remove the transfer adapter rear mounting bolts.
(c) Pull the transfer straight up and remove it from the trans-
mission.
HINT:
Take care not to damage the adaptor rear oil seal with the trans-
fer input gear spline.
Downloaded from www.Manualslib.com manuals search engine PR01H−01
R15507Matchmarks
R04164
SST
− PROPELLER SHAFTPROPELLER SHAFT ASSEMBLY (2WD)
PR−3
1996 TOYOTA T100 (RM449U)
REMOVAL
REMOVE PROPELLER SHAFT
(a) Place matchmarks on the differential and propeller shaft
flanges.
(b) Remove the 4 bolts, washers and nuts.
(c) Remove the 2 mounting bolts and center support bearing
from the frame crossmember.
(d) Pull out the propeller shaft yoke from the transmission.
(e) Insert SST in the transmission to prevent oil leakage.
SST 09325−40010
