1996 TOYOTA T100 buttons

Downloaded from www.Manualslib.com manuals search engine BE2826
Cassette Tape Slot Cover
− BODY ELECTRICALAUDIO SYSTEM
BE−61
1861 Author: Date:
1996 TOYOTA T100 (RM449U)
5. ANTI−THEFT SYSTEM
HINT:
The words ”ANTI−THEFT SYSTEM” are displayed on the cas-
sette tape slot cover.
For operation instructions for the anti−theft system, please con-
sult the audio system section in the Owner’s Manual (hereafter
called O/M).
(a) Setting system
The system is in operation once the customer has pushed
the required buttons and entered the customer−selected
3−digit ID number.
(Refer to the O/M section, ”Setting the anti−theft system”)
HINT:
When the audio system is shipped the ID number has not
been input, so the anti−theft system is not in operation.
If the ID number has not been input, the audio system re-
mains the same as a normal audio system.
(b) Anti−theft system operation
If the normal electrical power source (connector or battery
terminal) is cut off, the audio system becomes inoperable,
even if the power supply resumes.
(c) Canceling system
The ID number chosen by the customer is input to cancel
the anti−theft system.
(Refer to the O/M section, ”If the system is activated”)
HINT: To change or cancel the ID number, please refer to
the O/M section ”Canceling the system”.

Downloaded from www.Manualslib.com manuals search engine BE27H−01
BE−62
− BODY ELECTRICALAUDIO SYSTEM
1996 TOYOTA T100 (RM449U)
TROUBLESHOOTING
NOTICE:
When replacing the internal mechanism (computer part) of the audio system, be careful that no part
of your body or clothing comes in contact with the terminals of the leads from the IC, etc. of the re-
placement part (spare part).
HINT:
This inspection procedure is a simple troubleshooting which should be carried out on the vehicle during sys-
tem operation and was prepared on the assumption of system component troubles (except for the wires and
connectors, etc.).
Always inspect the trouble taking the following items into consideration.
Open or short circuit of the wire harness
Connector or terminal connection fault
For audio systems with anti−theft system, troubleshooting items marked (*) indicate that ”Trou-
bleshooting for ANTI−THEFT SYSTEM” should be carried out first.
ProblemNo.
RadioNo power coming in.*1
Power coming in, but radio not operating.*2
Noise present, but AM − FM not operating.3
Either speaker does not work.4
Either AM or FM does not work.5
Reception poor (Volume faint).5
Few preset tuning bands.5
Sound quality poor.6
Cannot set station select button.6
Preset memory disappears.7
Tape PlayerCassette tape cannot be inserted.8
Cassette tape inserts, but no power.*9
Power coming in, but tape player not operating.10
Either speaker does not work.11
Sound quality poor (Volume faint).12
Tape jammed, malfunction with tape speed or auto−reverse.13
APS, SKIP, RPT buttons not operating.14
Cassette tape will not eject.*15
AntennaAntenna does not fully extened or fully retract.16
Antenna − related.17
NoiseNoise produced by vibration or shock while driving.18
Noise produced when engine starts.19

Downloaded from www.Manualslib.com manuals search engine S
UPS : Radio + Tape Player U : Radio − Tape Player (Built−in Power Amplifier)
P : Radio − Tape Player (Separate Power Amplifier)Tape player faulty.
Radio assembly faulty. 13 Tape Player TAPE JAMMED, MALFUNCTION WITH TAPE SPEED OR AUTO−REVERSE
Functions OK if different tape (less than 120 mins.)
is inserted?
Is there a foreign object inside tape player?
Operates normally after cleaning the heads?Cassette tape faulty.
Remove foreign object.
Head dirty. No
No
NoYe s
Ye s
Ye s
14 Tape Player APS, SKIP, RPT BUTTONS NOT OPERATING
S : Radio + Tape Player U : Radio − Tape Player (Built−in Power Amplifier)
P : Radio − Tape Player (Separate Power Amplifier)
Functions OK if different cassette tape inserted? Radio assembly faulty.
Ye s
Cassette tape faulty.(Less than 3 secs. of silence between songs (APS, RPT). Less than 15 secs.of silence (SKIP).)
No
− BODY ELECTRICALAUDIO SYSTEM
BE−75
1996 TOYOTA T100 (RM449U)

Downloaded from www.Manualslib.com manuals search engine BE1PL−02
BE4671
Antenna Nut
BE5781
BE5780
BE4674
Twist BE−82
− BODY ELECTRICALANTENNA
1996 TOYOTA T100 (RM449U)
REPLACEMENT
1. REMOVE ANTENNA ROD
HINT:
Perform this operation with negative (−) cable connected to the
battery terminal.
(a) Turn the ignition switch to ”LOCK” position.
(b) Remove the antenna nut.
(c) Press the ”AM” buttons on the radio receiver, and simulta-
neously turn the ignition switch to ”ACC” position.
HINT:
The rod will extend fully and be released from the motor
antenna.
After removing the antenna rod, leave the ignition switch
as ”ACC”.
NOTICE:
To prevent body damage when the antenna rod is released,
hold the rod while it comes out.
2. INSTALL ANTENNA ROD
(a) Insert the cable of the rod until it reaches the bottom.
HINT:
When inserting the cable, the teeth on the cable must face to-
ward the front of the vehicle.
(b) Wind the cable to retract the rod by turning the ignition
switch to ”LOCK” position.
HINT:
If the ignition switch is already in ”LOCK” position, perform
step 1 (c) first, then turn the ignition switch to ”ACC” posi-
tion.
In case the cable is not wound, twist it as shown in the il-
lustration.
Even if the rod has not retracted fully, install the antenna
nut and inspect the antenna rod operation. It will finally re-
tract fully.
(c) Inspect the antenna rod operation by pushing the radio
wave band select buttons.