65
2. CONTROL SYSTEM
*SFI
THE SFI SYSTEM MONITORS THE ENGINE CONDITION THROUGH THE SIGNALS, WHICH ARE INPUT FROM EACH SENSOR (INPUT
SIGNALS (1) TO (11)). THE BEST FUEL INJECTION VOLUME IS DECIDED BASED ON THIS DATA AND THE PROGRAM MEMORIZED
BY THE ENGINE CONTROL MODULE, AND THE CONTROL SIGNAL IS OUTPUT TO TERMINALS #10, #20, #30, AND #40 OF THE
ENGINE CONTROL MODULE TO OPERATE THE INJECTOR (INJECT THE FUEL). THE SFI SYSTEM PRODUCES CONTROL OF FUEL
INJECTION OPERATION BY THE ENGINE CONTROL MODULE IN RESPONSE TO THE DRIVING CONDITIONS.
*IDLE SPEED CONTROL SYSTEM
THE IDLE SPEED CONTROL SYSTEM INCREASES THE RPM AND PROVIDES IDLING STABILITY FOR FAST IDLE-UP WHEN THE
ENGINE IS COLD AND WHEN THE IDLE SPEED HAS DROPPED DUE TO ELECTRICAL LOAD, ETC. THE ENGINE CONTROL MODULE
EVALUATES THE SIGNALS FROM EACH SENSOR (INPUT SIGNALS (1 TO 5, 11), OUTPUTS CURRENT TO TERMINAL ISCO AND ISCC,
AND CONTROLS THE IDLE AIR CONTROL VALVE.
*A/C CUT CONTROL SYSTEM
WHEN THE VEHICLE SUDDENLY ACCELERATES FROM LOW ENGINE SPEED, THIS SYSTEM CUTS OFF AIR CONDITIONING
OPERATION FOR A FIXED PERIOD OF TIME IN RESPONSE TO THE SPEED SENSOR, THROTTLE VALVE OPENING ANGLE AND
INTAKE MANIFOLD PRESSURE IN ORDER TO MAINTAIN ACCELERATION PERFORMANCE.
THE ENGINE CONTROL MODULE RECEIVES INPUT SIGNALS (4, 5 AND 9), AND INPUTS SIGNALS TO TERMINAL ACT.
3. DIAGNOSIS SYSTEM
WITH THE DIAGNOSIS SYSTEM, WHEN THERE IS A MALFUNCTION IN THE ENGINE CONTROL MODULE SIGNAL SYSTEM, THE
MALFUNCTIONING SYSTEM IS RECORDED IN THE MEMORY. THE MALFUNCTIONING SYSTEM CAN THEN BE FOUND BY READING
THE DISPLAY (CODE) OF THE MALFUNCTION INDICATOR LAMP.
4. FAIL-SAFE SYSTEM
WHEN A MALFUNCTION OCCURS ON ANY SYSTEM, IF THERE IS A POSSIBILITY OF ENGINE THROUBLE BEING CAUSED BY
CONTINUED CONTROL BASED IN THE SIGNALS FROM THAT SYSTEM, THE FAIL-SAFE SYSTEM EITHER CONTROLS THE SYSTEM BY
USING DATA (STANDARD VALUES) RECORDED IN THE ENGINE CONTROL MODULE MEMORY OR ELSE STOPS THE ENGINE.
