1996 TOYOTA RAV4 instrument panel

Q
R
S
T
U
V
W
X
6
B HOW TO USE THIS MANUAL
WITH THE IGNITION SW TURNED ON, THE CURRENT FLOWS TO TERMINAL 3 OF THE POWER WINDOW MASTER SW, TERMINAL 2 OF THE POWER WINDOW CONTROL
RELAY AND TERMINAL 8 OF THE POWER WINDOW SW THROUGH THE DOOR FUSE.
1.DRIVER'S WINDOW MANUAL UPº OPERATION BY MASTER SW
HOLDING MANUAL SW (DRIVER'S) ON UPº POSITION LOCATED IN POWER WINDOW MASTER SW, THE CURRENT FLOWS TO TERMINAL 5 OF THE POWER WINDOW
CONTROL RELAY THROUGH TERMINAL 3 OF THE MASTER SW TERMINAL 2 TO OPERATE A POWER WINDOW CONTROL RELAY. THUS THE CURRENT INSIDE THE RELAY
FLOWS FROM TERMINAL 2 OF THE RELAY TERMINAL 1 TERMINAL 2 OF THE POWER WINDOW MOTOR TERMINAL 1 TERMINAL 4 OF THE RELAY TERMINAL
3 TO GROUND. THE MOTOR TURNS TO ASCENT THE WINDOW. RELEASING THIS SW, THE ROTATION OF MOTOR IS STOPPED AND THE WINDOWS CAN STOP AT WILL
POINT.
(FOR THE MANUAL DOWNº OPERATION, CURRENT FLOWS IN THE REVERSE DIRECTION BECAUSE THE TERMINALS WHERE IT FLOW ARE CHANGED).
2.DRIVER'S WINDOW AUTO DOWNº OPERATION BY MASTER SW
ONCE THE AUTO DOWNº BUTTON OF THE MASTER SW IS PUSHED, THE CURRENT FLOW TERMINAL 9 OF THE POWER WINDOW CONTROL RELAY THROUGH TERMINAL
3 OF THE MASTER SW TERMINALS 8 AND 9 TO OPERATE THE RELAY. THUS THE CURRENT INSIDE THE POWER WINDOW CONTROL RELAY FLOWS FROM TERMINAL
2 OF THE RELAY TERMINAL 4 TERMINAL 1 OF THE POWER WINDOW MOTOR TERMINAL 2 TERMINAL 1 OF THE RELAY TERMINAL 3 TO GROUND.
THE MOTOR CONTINUES THE ROTATION ENABLING TO DESCENT THE WINDOW.
THE WINDOW DESCENDS TO THE END POSITION. THE CURRENT WILL BE CUT OFF TO RELEASE THE AUTO DOWN FUNCTION BASED ON THE INCREASING CURRENT
BETWEEN TERMINAL 2 OF THE RELAY AND TERMINAL 1 IN RELAY.
3.DRIVER'S WINDOW AUTO DOWN RELEASE OPERATION BY MASTER SW
HOLDING THE MANUAL SW (DRIVER'S) ON UPº POSITION IN OPERATING AUTO DOWN. THE CURRENT FROM TERMINAL 3 OF THE MASTER SW PASSING TERMINAL 2
FLOWS TERMINAL 5 OF THE RELAY AND RELEASES THE AUTO DOWN FUNCTION IN THE POWER WINDOW CONTROL RELAY. RELEASING THE HAND FROM SW, WINDOW
STOPS AND CONTINUING ON TOUCHING SW, THE FUNCTION SWITCHES TO MANUAL UP OPERATION.
4.PASSENGER'S WINDOW UP OPERATION (MASTER SW) AND WINDOW LOCK SW OPERATION
HOLDING PASSENGER'S WINDOW SW (MASTER SW) ON UPº, THE CURRENT FLOWS FROM TERMINAL 3 OF THE MASTER SW PASSING TERMINAL 6 TO TERMINAL 3 OF
THE POWER WINDOW SW (PASSENGER'S) TERMINAL 4 TERMINAL 2 OF THE MOTOR TERMINAL 1 TERMINAL 9 OF THE POWER WINDOW SW TERMINAL
7 TERMINAL 1 OF THE MASTER SW TERMINAL 4 TO GROUND. THE MOTOR RUNS TO ASCENT THE WINDOW. RELEASING THIS SW, THE ROTATION OF MOTOR
IS STOPPED AND WINDOW CAN STOP AT WILL PLACE.
SWITCHING THE WINDOW LOCK SW IN LOCKº POSITION, THE CIRCUIT IS OPENED AND STOPPED THE MOTOR ROTATION.
(FOR THE DOWN OPERATION, CURRENT FLOWS IN THE REVERSE DIRECTION BECAUSE THE TERMINALS WHERE IT FLOWS ARE CHANGED).
P 2 POWER WINDOW CONTROL RELAY
3-GROUND: ALWAYS CONTINUITY
2-GROUND: APPROX. 12 VOLTS WITH THE IGNITION SW AT ON POSITION
5-GROUND: APPROX. 12 VOLTS WITH THE IGNITION SW AT ON POSITION AND THE MASTER SW AT UP POSITION
8-GROUND: APPROX. 12 VOLTS WITH THE IGNITION SW AT ON POSITION AND THE MASTER SW AT AUTO DOWN POSITION
9-GROUND: APPROX. 12 VOLTS WITH THE IGNITION SW AT ON POSITION AND THE MASTER SW AT DOWN OR AUTO DOWN POSITION
P 4 POWER WINDOW MASTER SW
4-GROUND: ALWAYS CONTINUITY
3-GROUND: APPROX. 12 VOLTS WITH THE IGNITION SW AT ON POSITION
WINDOW LOCK SW
OPEN WITH THE WINDOW LOCK SW AT LOCK POSITION
: PARTS LOCATION
CODESEE PAGECODESEE PAGECODESEE PAGE
P 221P 421P 621
P 321P 521
: RELAY BLOCKS
CODESEE PAGERELAY BLOCK (RELAY BLOCK LOCATION)
116R/B NO. 1 (INSTRUMENT PANEL LEFT)
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODESEE PAGEJUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
3B14J/B NO. 3 AND COWL WIRE (INSTRUMENT PANEL LEFT SIDE)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODESEE PAGEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
ID126FRONT DOOR RH WIRE AND COWL WIRE (RIGHT KICK PANEL)
IH126FRONT DOOR LH WIRE AND COWL WIRE (LEFT KICK PANEL)
: GROUND POINTS
CODESEE PAGEGROUND POINT LOCATION
IC24COWL LEFT
: SPLICE POINTS
CODESEE PAGEWIRE HARNESS WITH SPLICE POINTSCODESEE PAGEWIRE HARNESS WITH SPLICE POINTS
I 524COWL WIRE
SYSTEM OUTLINE
SERVICE HINTS

Q
R
S
T
U
V
W
X
7
B
:Explains the system outline.
:Indicates values or explains the function for reference during troubleshooting.
:Indicates the reference page showing the position on the vehicle of the parts in the system circuit.
Example: Part P 4º (Power Window Master SW) is on page 21 of the manual.
* The letter in the code is from the first letter of the part, and the number indicates its order
in parts starting with the letter.
Part is 4th in order
Power Window Master SW Example: P
4
:Indicates the reference page showing the position on the vehicle of Relay Block Connectors in the
system circuit.
Example: Connector 1º is described on page 16 of this manual and is installed on the left side of the
instrument panel.
:Indicates the reference page showing the position on the vehicle of J/B and Wire Harness in the system
circuit.
Example: Connector 3Bºconnects the Cowl Wire and J/B No. 3. It is described on page 14 of this
manual, and is installed on the instrument panel left side.
:Indicates the reference page describing the wiring harness and wiring harness connector (the female
wiring harness is shown first, followed by the male wiring harness).
Example: Connector ID1ºconnects the front door RH wire (female) and cowl wire (male). It is described
on page 26 of this manual, and is installed on the right side kick panel.
:Indicates the reference page showing the position of the ground points on the vehicle.
Example: Ground point ICº is described on page 24 of this manual and is installed on the cowl left side.
:Indicates the reference page showing the position of the splice points on the vehicle.
Example: Splice point I 5º is on the Cowl Wire Harness and is described on page 24 of this manual.
HINT:
Junction connector (code: J1, J2, J3, J4, J5, J6, J7, J8,
J9) in this manual include a short terminal which is
connected to a number of wire harnesses. Always
perform inspection with the short terminal installed.
(When installing the wire harnesses, the harnesses
can be connected to any position within the short
terminal grouping. Accordingly, in other vehicles, the
same position in the short terminal may be connected
to a wire harness from a different part.)
Wire harness sharing the same short terminal
grouping have the same color.

18
F RELAY LOCATIONS
[Engine Compartment]
[Instrument Panel]

30
G ELECTRICAL WIRING ROUTING
Position of Parts in Instrument Panel
A 12 A/C Amplifier C 6 Cigarette Lighter Illumination
A 13 A/C Control SW C 7 Clock
A 14 A/C Thermistor C 8 Clutch Start SW
A 15 ABS Deceleration Sensor C 9 Combination Meter
A 16 ABS ECU C 10 Combination Meter
A 17 ABS ECU C 11 Combination Meter
A 18 Airbag Sensor Assembly C 12 Combination SW
A 19 Airbag Squib (Front Passenger Airbag Assembly) C 13 Combination SW
A 20 Airbag Squib (Steering Wheel Pad) C 14 Combination SW
C 15 Cruise Control Clutch SW
B 3 Blower Motor C 16 Cruise Control ECU
B 4 Blower Resisitor
B 5 Blower SW D 2 Data Link Connector 3
B 6 Buckle SW LH D 3 Defroster Mode SW
D 4 Diode (Engine Idle-Up)
C 4 Center Diff. Lock Control SW D 5 Door Lock Control Relay
C 5 Cigarette Lighter

31
G
Position of Parts in Instrument Panel
E 3 Electronically Controlled Transmission Pattern J 9 Junction Connector
Select SW J 10 Junction Connector
E 4 Engine Control Module J 11 Junction Connector
E 5 Engine Control Module
E 6 Engine Control Module K 2 Key Interlock Solenoid
F 8 Fuse Block O 4 O/D Main SW
H 4 Hazard SW P 2 Parking Brake SW
I 10 Ignition SW R 3 Radio and Player
R 4 Radio and Player
J 1 Junction Connector R 5 Rear Window Defogger SW
J 2 Junction Connector R 6 Remote Control Mirror SW
J 3 Junction Connector R 7 Rheostat
J 4 Junction Connector
J 5 Junction Connector S 4 Shift Lock ECU
J 6 Junction Connector S 5 Stop Light SW
J 7 Junction Connector
J 8 Junction Connector U 1 Unlock Warning SW

37
G
Connector Joining Wire Harness and Wire Harness
CODEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
IB1ENGINE ROOM MAIN WIRE AND INSTRUMENT PANEL WIRE (LEFT KICK PANEL)
IB2ENGINE ROOM MAIN WIRE AND INSTRUMENT PANEL WIRE (RIGHT KICK PANEL)
IC1FRONT DOOR LH WIRE AND INSTRUMENT PANEL WIRE (LEFT KICK PANEL)
ID1FLOOR WIRE AND INSTRUMENT PANEL WIRE (LEFT KICK PANEL)ID2FLOOR WIRE AND INSTRUMENT PANEL WIRE (LEFT KICK PANEL)
IE1ROOF WIRE AND INSTRUMENT PANEL (LEFT KICK PANEL)

39
G
Connector Joining Wire Harness and Wire Harness
CODEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
IF1ENGINE ROOM MAIN WIRE AND FLOOR WIRE (LEFT KICK PANEL)
IG1ENGINE WIRE AND INSTRUMENT PANEL WIRE (UNDER THE INSTRUMENT PANEL CENTER)IG2ENGINE WIRE AND INSTRUMENT PANEL WIRE (UNDER THE INSTRUMENT PANEL CENTER)
IH1HEATER BLOWER WIRE AND INSTRUMENT PANEL WIRE (RIGHT KICK PANEL)
II1FRONT DOOR RH AND INSTRUMENT PANEL WIRE (RIGHT KICK PANEL)
IJ1FRONT DOOR LH AND FLOOR WIRE (LEFT KICK PANEL)

56
POWER SOURCE
(2) H-LP RELAY
(2) 2 - (2) 1 : CLOSED WITH THE LIGHT CONTROL SW AT HEAD POSITION OR THE DIMMER SW AT
FLASH POSITION
TAILLIGHT RELAY
5-3 : CLOSED WITH LIGHT CONTROL SW AT TAIL OR HEAD POSITION
I10 IGNITION SW
2-3 : CLOSED WITH THE IGNITION KEY AT ACC OR ON POSITION
2-4 : CLOSED WITH THE IGNITION KEY AT ON OR ST POSITION
7-6 : CLOSED WITH THE IGNITION KEY AT ON OR ST POSITION
7-8 : CLOSED WITH THE IGNITION KEY AT ST POSITION
: PARTS LOCATION
CODESEE PAGECODESEE PAGECODESEE PAGE
F 728I1031
F 831J 131
: RELAY BLOCKS
CODESEE PAGERELAY BLOCKS (RELAY BLOCK LOCATION)
223R/B NO. 2 (ENGINE COMPARTMENT LEFT)
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODESEE PAGEJUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
1C20INSTRUMENT PANEL WIRE AND J/B NO 1 (LOWER FINISH PANEL)1D20INSTRUMENT PANEL WIRE AND J/B NO. 1 (LOWER FINISH PANEL)
1E20FUSE BLOCK ASSY WIRE AND J/B NO 1 (LOWER FINISH PANEL)1F20FUSE BLOCK ASSY WIRE AND J/B NO. 1 (LOWER FINISH PANEL)
1K20ENGINE ROOM MAIN WIRE AND J/B NO. 1 (LOWER FINISH PANEL)
4A22ENGINE WIRE AND J/B NO. 4 (RIGHT KICK PANEL)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODESEE PAGEJOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
EA134ENGINE WIRE AND ENGINE ROOM MAIN WIRE (INSIDE OF R/B NO.2)
IG138ENGINE WIRE AND INSTRUMENT PANEL WIRE (UNDER THE INSTRUMENT PANEL CENTER)
: SPLICE POINTS
CODESEE PAGEWIRE HARNESS WITH SPLICE POINTSCODESEE PAGEWIRE HARNESS WITH SPLICE POINTS
I 338ENGINE ROOM MAIN WIRE
SERVICE HINTS