1996 OLDSMOBILE BRAVADA Owners Manual

3.
4.
5.
After five seconds, the compass will acknowledge
the variation mode by displaying the current zone
number. When it does, release both buttons.
Press US/MET until your zone number appears
on
the display.
Press MODE to enter your zone number. Your
variance is now set and the display will return to the
COMP/TEMP mode.
TRIP: Once in the TRIP mode, pressing the MODE
button will step you through the following
TRIP functions:
0
0
0
0
0
AVG ECON: The average fuel economy since the
last reset is displayed.
INST ECON: Instantaneous fuel economy for the
last second of driving is displayed.
RANGE: The display indicates the estimated
distance that can be travelled
with the remaining fuel
in the tank, based on the fuel economy for the last
few hours of driving.
FUEL USED: The fuel used since the last reset
is displayed.
AVG SPEED: The average speed since the last reset
is displayed.
To reset the trip computer, press the MODE and
USMET buttons simultaneously for at least two seconds.
All functions will be displayed for a 112 second once the
system is reset. Reset can only be performed
in the AVG
ECON,
FUEL USED and AVG SPEED modes. All three
modes are reset simultaneously.
Sunelasses Storaee Comnartment
To open the sunglasses storage compartment in the
overhead console, press the release button. Then pull the
compartment down.
2-37
ProCarManuals.com

Door Storage
You will find a storage compartment on each of the
doors. Cupholders are
on the rear doors.
Convenience Net
Front Storage Area
Lift the armrest cover of the console compartment to
reveal a coinholder and additional storage. Ribs have
been provided for convenient storage of cassette tapes
and compact discs.
A storage compartment under your radio may be used to
hold small items. Front cupholders are also provided
on
the console. Both have liners that are easily removed
for cleaning.
A convenience net in the rear of your vehicle helps keep
small items, like gloves and light clothing
in place
during sharp turns or quick stops and starts.
The net
is not designed to retain these items during
off-road use. The net is not for larger, heavier items.
The convenience net
is anchored to the endgate door.
Attach the upper loops to the retainers
on either side of
the endgate opening (the label should be
in the upper
passenger’s side corner, visible from the rear of vehicle).
Attach the lower hooks to the rear cargo tie-downs on
the floor.
ProCarManuals.com

Cargo Security Shade
You can use the cargo security shade to cover items in
the cargo area of your vehicle.
Grasp the handle and unroll the cover. Latch the posts
into the sockets on the inside trim panel
on the
passenger's side
of the vehicle to secure it.
An improperly stored cargo cover could be
thrown about the vehicle during a collision
or
sudden maneuver. You or others could be
injured.
If you remove the cover, always store it
outside
of the vehicle. When you put it back,
always be sure that it is securely reattached. Cargo Tie Downs
There
are four cargo tie downs in the rear that allow
you to strap cargo in and keep it from moving inside
the vehicle.
ProCarManuals.com

Luggage Carrier
I
If you try to carry something on top of your
vehicle that is longer
or wider than the luggage
carrier
-- like paneling, plywood, a mattress, and
so forth -- the wind can catch it as you drive
along. This can cause you to lose control. What
you are carrying could be violently torn off, and
this could cause you or other drivers to have
a
collision, and of course damage your vehicle. You
may be able to carry something like this inside.
But, never carry something longer or wider than
the luggage carrier on top
of your vehicle.
A luggage carrier allows you to load things on top of
your vehicle. The luggage carrier has slats and side rails
attached to the roof, sliding crossrails and places to use
for tying things down. These let you load some things
on top of your vehicle,
so long as they are not wider or
longer than the luggage carrier.
ProCarManuals.com

,
To slide the crossrails to where you want them, push up
on the lever under each side of the crossrail. This will
release the crossrail and allow you
to slide it. When the
crossrail
is where you want it, push down on the lever to
lock.it into place.
NOTICE:
Loading cargo that weighs more than 200 lbs.
(91 kg) on the luggage qrrier may damage
your, vehicle.
When you carry cargo on the luggage carrier of
a
proper size and weight, put it on the slats, as far
against the rear of the load, to help keep it from
moving.
You can then tie it down.
I forward as you can. Then slide the crossrail up
Don’t exceed the maximum vehicle capacity when
loading your vehicle. For more information on vehicle
capacity.and loading, see “Loading Your Vehicle” in
the Index.
To prevent damage or loss of cargo as you’re driving,.
check now and then to make sure the luggage carrier
is
locked and cargo is ‘still securely fastened.
Ashtrays and Cigarette Lighter
To use the lighter, press it in all the way, &d let go.
When it’s ready, it will pop back by itself.
NOTICE:
Don’t hold a cigarette lighter in with your hand
while’ it is heating..p you do, it won’t be able to
back away from the heating element when it’s
ready. That can make it overload, damaging the
lighter and the heating element.
The front-ashtray must be completely gulled out to the
open position before the ashtray cover opens and smoking material can be deposited.
NOTICE:
,.
Don’t put papers and other things that burn
into your ashtray.
If you’ do, cigarettes or other
causing damage.
’ smoking materials could set them on fire,
2-41
ProCarManuals.com

.. -. , i ,.
To remove the front ashtray, lift the release tab as high . ' Illuminated Visor Vanity Mirror
as possible, then remove the tray. I
There are smaller ashtrays inside the rehr doors. Press 4
PUSH to turn an ashtray around for use. - I*
Sun Visors
, .. 1.
1 To block out glare, you can swing down the top and
bottom visors. You can
also swing the'bottom visor from
side to side. Your visors may have an extension that can
be pulled out for additional glare protection and a strap
for ,holding small items, such as maps.
Visor Vanity Mirror
Pull the-sun visor down and lift the cover to expose the
vanity ,mirror.
I
Pull the sun visor down and.lift the mirror cover to turn
on the lamps.
ProCarManuals.com

Accessory Power Outlets
The accessory power outlets are located below the
cigarette lighter. Just pull down from the top
of the door
and follow the proper installation instructions that are
included with any electrical equipment
you install.
These circuits are protected by a fuse and have
maximum current levels.
I NOTICE: 1
When using the accessory power outlets,
maximum electrical load must not exceed
25 amps. Always turn off any electrical
equipment when not in use. Leaving electrical
equipment on for extended periods
will drain
your battery.
Universal Transmitter
This transmitter allows you to consolidate the functions of
up to three individual hand-held transmitters. It will
operate garage doors and gates, or with the accessory
package, other devices controlled by radio frequency such
as home/office lighting systems and security systems.
ProCarManuals.com

The transmitter will learn and transmit the frequencies
of most current transmitters and is powered by your
vehicle’s battery and charging system.
This device complies
with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Programming the Transmitter
Do not use the transmitter with any garage door opener
that does not have the “stop and reverse” feature. This
includes any garage door opener model manufactured
before April
I, 1982.
Be sctre that people and objects ure clear of the garuge
door you are progrmnmin.g!
Your vehicle’s engine should be turned off while
programming the transmitter. Follow these steps to
program
up to three channels:
1.
2.
3.
If you have not previously programmed a universal
channel, proceed to Step
2. Otherwise, hold
down the two outside buttons on the universal
transmitter until the red light begins
to flash rapidly
(approximately
20 seconds). Then release the
buttons. This procedure initializes the memory and
erases any previous settings for all three channels.
Hold the end
of the hand-held transmitter against the
bottom surfixe of
the universal transmitter so that
you can still see the red light.
Decide which one
of the three channels you want to
program. Using both hands, press the hand-held
transmitter button and the desired button on the
universal transmitter. Continue to hold both buttons
through Step
4.
ProCarManuals.com