1996 FORD EXPLORER bulb

Servicing Your Explorer
393
%*
[SV45800(ALL)03/95]
Headlamp Bulb
*
[SV45900(ALL)01/95]
The headlamps on your vehicle use replaceable bulbs. When the
lamp burns out, simply replace the bulb, rather than the whole
lamp.
*
[SV46000(ALL)05/95]
RWARNING
Handle a halogen headlamp bulb carefully and keep out
of children's reach. Grasp the bulb only by its plastic
base and do not touch the glass. The oil from your hand
could cause the bulb to break the next time the
headlamps are operated.
*
[SV46050(ALL)12/91]
NOTE: If the bulb is accidently touched, it should be cleaned
with rubbing alcohol before being used.
*
[SV46100(ALL)01/95]
Do not remove the burned-out bulb unless you can immediately
replace it with a new one. If a bulb is removed for an extended
period of time, contaminants may enter the headlamp housing
and affect its performance.
[SV46200(ALL)04/94]
10-1/2 pica
art:0021197-A
Parts of a headlamp
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

394
*
[SV46300(ALL)03/95]
Removing the headlamp bulb
*
[SV46400(ALL)01/95]1.
Make sure that the headlamp switch is in the OFF position.
[SV46501( X)05/95]2.
Lift the hood, open the hinged headlamp cover, and behind
the headlamp remove the electrical connector by grasping
the wires and pulling rearward.
*
[SV46700(ALL)04/95]3.
Remove the bulb retaining ring by turning it 1/8 of a turn to
free it from the socket. Then slide the ring off the plastic
base.Keep the ring.You must use it again to hold the new
bulb in place.
*
[SV46800(ALL)04/95]4.
Carefully remove the bulb assembly from its socket by
gently pulling it rearward without turning.
*
[SV46900(ALL)03/95]
Installing the headlamp bulb
*
[SV47000(ALL)02/95]1.
With the flat side of the bulb's plastic base facing upward,
insert the glass end of the bulb into the socket. You may
need to turn the bulb left or right to line up the grooves in
the plastic base with the tabs in the socket. When the
grooves are aligned, push the bulb into the socket until the
plastic base contacts the rear of the socket.
*
[SV47100(ALL)08/95]2.
Slip the bulb retaining ring over the plastic base until it
contacts the rear of the socket. Lock the ring into the socket
by rotating it clockwise until you feel a ªstop.º
*
[SV47200(ALL)02/95]3.
Push the electrical connector into the rear of the plastic base
until it snaps, locking it into position.
*
[SV47300(ALL)02/95]4.
Turn the headlamps on and make sure that they work
properly. If the headlamp was correctly aligned before you
changed the bulb, you should not need to align it again.
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

Servicing Your Explorer
395
*
[SV47401( X)02/95]
Map Lamp Bulb (Overhead Console)
*
[SV47402( X)03/93]
To remove the lens, pry with a small screwdriver as shown:
[SV47403( X)10/94]
10-1/2 pica
art:0021199-A
Removing the lens
*
[SV47404( X)03/93]
To remove the bulbs, use a screwdriver or coin to push up and
rotate counterclockwise90Ê. Thebulb and bulb holder will then
drop out from the lamp as shown:
[SV47405( X)10/94]
10-1/2 pica
art:0021200-A
Removing bulb
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

396
[SV47415(ALL)01/95]
Tail Lamp Bulb
[SV47420(ALL)01/95]
Removing the tail lamp bulb
[SV47445( X)10/94]1.
Remove the two (2) screws retaining rear lamp to vehicle.
[SV47450( X)10/94]2.
Remove rear lamp by pulling rearward to disengage two
lower barbed retainers.
[SV47455( X)10/94]3.
Remove socket from lamp.
[SV47460( X)10/94]4.
Remove bulb from socket.
[SV47465(ALL)01/95]
Installing the tail lamp bulb
[SV47490( X)10/94]1.
Install bulb in socket.
[SV47495( X)10/94]2.
Install socket to lamp.
[SV47500( X)10/94]3.
Align lower barbed retainers and install lamp to vehicle.
[SV47505( X)10/95]4.
Install two (2) lamp retaining screws.
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

Servicing Your Explorer
397
[SV47515( X)10/94]
24 pica art:0021370-A
Replacing the tail lamp bulb
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

398
*
[SV47625(ALL)03/95]
Bulb Specifications
[SV47825( X)05/95]
thirty-four pica
chart:0090186-AFile:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

423
Index
Brake fluid
brake warning light.................. 81
checking and adding................ 377
description..................... 377
specifications.................... 406
Brakelamp, high-mount brakelamp........... 134
Brakes
adjustment..................... 261
anti-lock...................... 261
applying the brakes................. 265
brake warning light.................. 81
fluid, checking and adding.............. 377
fluid, refill capacities................ 377
fluid, specifications................. 406
front disc...................... 261
if brakes do not grip well.............. 264
master cylinder................... 377
new brake linings................... 5
noise........................ 261
parking...................... 266
power braking................... 261
servicing....................264, 377
stopping distances................265, 267
trailer....................... 290
when storing your vehicle.............. 410
Brake-shift interlock.................. 247
Break-in period..................... 5
Brights (high beams).................91,136
Built-in child seat
cleaning....................... 52
operation....................... 34
Bulbs, replacing.................... 392
halogen...................... 393
headlamps..................... 393
File:unixx.ex
Update:Thu Feb 29 09:21:09 1996

431
Index
GAWR (Gross Axle Weight Rating)
calculating..................... 277
definition....................271, 276
driving with a heavy load.............. 271
location....................271, 276
Gearshift
automatic operation................. 246
column-mounted.................. 246
floor-mounted.................... 251
gearshift override.................. 247
locking the gearshift.................. 67
positions....................246, 251
shifting the gears................246, 251
shift-lock...................... 247
Gearshift:shifting the gears.............246, 251
GVWR (Gross Vehicle Weight Rating)
calculating..................... 277
definition....................271, 275
driving with a heavy load.............. 271
location...................... 276
H
Hazard flashers.................... 139
Headlamps
aiming....................... 392
autolamp system.................. 128
checking alignment................. 392
cleaning...................... 132
daytime running lights................ 132
flashing...................... 136
high beam..................... 136
replacing bulbs.................392±393
turning on and off................. 127
warning chime.................... 91
File:unixx.ex
Update:Thu Feb 29 09:21:09 1996