1996 FORD EXPLORER change time

Introductory Information
5
%*
[IN04850( X)03/95]
AMBULANCE PACKAGES
*
[IN04875( X)03/95]
RWARNING
Do not use this vehicle as an ambulance.
%*
[IN06000(ALL)01/95]
Breaking Your Vehicle In
*
[IN06100(ALL)03/95]
Your new vehicle goes through an adjustment or break-in
period during the first 1,000 miles (1,600 km) that you drive it.
During the break-in period, you need to pay careful attention to
how you drive your vehicle.
%*
[IN06300(ALL)01/95]
n
Avoid sudden stops.Because your vehicle has new brake
linings, you should take these steps:
*
[IN06400(ALL)01/95]
Ð Watch traffic carefully so that you can anticipate when to
stop.
*
[IN06500(ALL)01/95]
Ð Begin braking well in advance.
*
[IN06600(ALL)01/95]
Ð Apply the brakes gradually.
*
[IN06700(ALL)01/95]
The break-in period for new brake linings lasts for 100 miles
(160 km) of city driving or 1,000 miles (1,600 km) of
highway driving.
*
[IN06750(ALL)12/93]
n
Wheel lug nuts must be retightened to proper torque
specifications at 500 miles/800 km of new vehicle operation.
Proper torque specifications are provided in this guide. Also
retighten to proper torque specification at 500 miles/800 km
after any wheel change or any other time the wheel lug nuts
have been loosened.
%*
[IN06800(ALL)01/95]
n
Use only the type of engine oil that Ford recommends.See
Engine oil recommendationsin the Index. Do not use special
ªbreak-inº oils.
File:02uninx.ex
Update:Thu Feb 29 08:58:20 1996

76
%*
[ST09300(ALL)05/95]
Guarding Against Exhaust Fumes
*
[ST09400(ALL)02/95]
Carbon monoxide, although colorless and odorless, is present in
exhaust fumes. Take precautions to avoid its dangerous effects.
*
[ST09500(ALL)09/95]
RWARNING
Never let your vehicle idle in an enclosed area, and do
not sit in a parked vehicle, (with the engine running) for
more than a short period of time. Exhaust fumes,
particularly carbon monoxide, might build up. These
fumes are harmful and could kill you.
*
[ST09600(ALL)05/95]
RWARNING
If you smell exhaust fumes inside your vehicle, have
your dealer inspect your vehicle immediately. Do not
drive if you smell exhaust fumes.
*
[ST09900(ALL)01/95]
Have the exhaust and body ventilation systems checked
whenever:
*
[ST10000(ALL)02/95]
n
your vehicle is raised for service
*
[ST10100(ALL)02/95]
n
the sound of the exhaust system changes
*
[ST10200(ALL)01/95]
n
your vehicle has been damaged in a collision
File:04unstx.ex
Update:Thu Feb 29 09:22:05 1996

Warning Lights and Gauges
101 for service as soon as possible. For Fuel Level, the first message
will indicate the fuel level status (OK or LOW) and the second
message will indicate the range (distance to empty).
*
[LG37500( X)01/95]
Message center operation during system check
*
[LG37550( X)01/95]
The M/C switches will operate as follows during the System
Check sequence:
*
[LG37600( X)01/95]1.
A press of the SYSTEM CHECK switch will advance the
cycle to the next system message without waiting the two
seconds.
*
[LG37650( X)01/95]2.
A press of the RESET switch anytime during this sequence
will cause the SYSTEM CHECK cycle to conclude
immediately and the last displayed feature before pressing
SYSTEM CHECK will be displayed.
[LG37700( X)04/94]3.
A press of the RANGE, FUEL STATUS, OR FUEL
ECONOMY, switch will conclude the SYSTEM CHECK cycle
and the requested feature will be displayed.
*
[LG37750( X)01/95]4.
A press of the ENGLISH/METRIC switch will halt the
SYSTEM CHECK cycle and display, in the new mode, the
last displayed feature before pressing the SYSTEM CHECK
switch.
*
[LG37800( X)01/95]5.
A press of the OIL CHANGE RESET switch during the
sequence will cause the SYSTEM CHECK cycle to conclude
and the Oil Change Reset Procedure will begin.
*
[LG37850( X)01/95]
System Warnings
[LG37900( X)01/95]
System warnings alert you to possible problems or malfunctions
in your vehicle's operating systems. There are twelve warning
messages which can be displayed by the Message Center (M/C)
to show the status of the monitored systems. When a warning
occurs, the warning message is displayed and a tone sounds.
The warning message will appear at a brighter level if the
instrument panel is dimmed.
File:05unlgx.ex
Update:Thu Feb 29 09:04:08 1996

106
*
[LG39650( X)01/95]
An oil change is required whenever indicated by the M/C. USE
ONLY RECOMMENDED ENGINE OILS (SeeEngine oilin the
Index).
*
[LG39700( X)01/95]
The M/C will tell you the percent of oil life left during System
Check. This percentage is based on your driving history and the
time since your last oil change. In order to ensure accurate oil
life left indications, you should only perform the following OIL
CHANGE RESET Procedure after you have the oil changed.
*
[LG39801( X)01/95]
Oil Change Reset
[LG39901( X)08/94]
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
ªOIL LIFE RESET TO 100%.º If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
[LG40001( X)08/94]
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer's
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
[LG40101( X)08/94]1.
Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to ªSTART
OIL LIFE AT XXX%.º
[LG40201( X)08/94]2.
Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.
File:05unlgx.ex
Update:Thu Feb 29 09:04:08 1996

116
[IP05100( X)03/95]
To change the temperature in the display window, select any
temperature between65ÊF (18ÊC) and 85ÊF (29ÊC)using the
BLUE (cooler) or RED (warmer) buttons. The Electronic
Automatic Temperature Control will do the rest.
[IP05150( X)03/95]
To change the temperature display from ÊF to ÊC or from ÊC to
ÊF, press and hold the MAX A/C and the DEFVbuttons at
the same time for one second.
[IP05200( X)03/95]
If you want continuous maximum cooling, push the BLUE
button until60ÊF (16ÊC) isshown in the display window. Your
EATC will cool at maximum and disregard the60ÊF (16ÊC)
setting until you select a warmer temperature with the RED
button. If you want continuous maximum heating, push the
RED button until90ÊF (32ÊC) isshown in the display window.
Your EATC will provide maximum heat regardless of the90ÊF
(32ÊC) setting until you select a cooler temperaturewith the
BLUE button.
*
[IP05300( X)03/95]
The display window tells you how the system is operating. It
will indicate the selected temperature and the operating function
you have chosen; AUTO or one of the six manual overrides. It
will also indicate manual (thumbwheel) control of the fan speed
with the
Hsymbol. The display window with all possible
displays and their positions are shown here. Normally not all
are shown at the same time but are included here to familiarize
you with the names and symbols.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

Features
163
*
[FV17400(ALL)04/95]
The remote entry system may not arm and disarm non-factory
installed anti-theft systems.
[FV17425( X)03/95]
Remote Memory Seat Feature (If equipped)
[FV17452( X)03/95]
Your vehicle allows the remote keyless entry system to control
theMemory Seatsystem (see Memory Seat section of this Owner
Guide). With this feature, each of the first three transmitters
programmed will recall a different seat position.
[FV17453( X)03/95]
The feature is turned on at the factory for your convenience.
[FV17454( X)05/93]
Pressing the transmitter UNLOCK button once will unlock the
driver's door and move the seat to its corresponding memory
seat position, just as if you had pressed the memory seat button
in the vehicle.
*
[FV17456( X)01/95]
When your dealer programs new transmitters, the order of
programming controls seat recall as follows:
[FV17458( X)03/95]
n
First transmitter programmed Ð recall seat position #1
[FV17460( X)03/95]
n
Second transmitter programmed Ð recall seat position #2
[FV17462( X)03/95]
n
Third transmitter programmed Ð recall seat position #3
[FV17464( X)03/95]
n
Fourth transmitter programmed Ð NO recall (Memory Seat
allows only three memory positions)
[FV17466( X)05/03]
You may change seat positions at any time. Once programmed,
Transmitter #1 will always move the seat to position #1.
[FV17483( X)03/95]
You can deactivate or reactivate the remote Memory Seat
feature:
[FV17485( X)02/95]1.
Make sure the anti-theft system is not armed or triggered,
ignition is off, and all doors and liftgate window are closed.
*
[FV17490( X)02/95]2.
Turn the ignition key from OFF to RUN.
*
[FV17495( X)02/95]3.
Press the door power unlock button 3 times.
*
[FV17500( X)02/95]4.
Turn the ignition key from RUN to OFF.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996

210
%*
[AS01500( X)08/95]
How to tune radio stations
*
[AS01600( X)01/95]
There are four ways for you to tune in a particular station. You
can use the“TUNE”,“SEEK”,“SCAN”or memory buttons.
*
[AS01700( X)09/95]


Using the“TUNE”function
*
[AS01800( X)01/95]
You can change the frequency up or down one increment at
a time by pressing and releasing either the left (
b) or right
(
a) side of the“TUNE”or“TUNE DISCS”button. To
change frequencies quickly, press and hold down either the
right or left side of the button.
*
[AS01900( X)08/95]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (SeeAll About Radio Frequenciesin this section.)
*
[AS02000( X)08/95]


Using the“SEEK”function
*
[AS02100( X)05/95]
Press the right (
a) side of the“SEEK”button to select the
next listenable station up the frequency band. Press the left
(
b) side of the button to select the next listenable station
down the frequency band. By holding the button down,
listenable stations can be passed over to reach the desired
station.
*
[AS02200( X)01/95]


Using the“SCAN”function
*
[AS02300( X)04/95]
Pressing the“SCAN”button will begin the scan mode up
the frequency band, stopping on each listenable station for
approximately five seconds.
*
[AS02400( X)02/95]
To stop the scan mode on the presently sampled station,
press the“SCAN”button again.
*
[AS02500( X)01/95]


Setting the station MEMORY PRESET buttons
*
[AS02600( X)01/95]
Your radio is equipped with 6 station memory buttons.
These buttons can be used to select up to 6 preset AM
stations and 12 FM stations (6 in FM1 and 6 in FM2)
File:09unasx.ex
Update:Thu Feb 29 09:08:53 1996

216
*
[AS06800( X)01/95]
How to store the tape
*
[AS06900( X)01/95]
Press the“AM/FM”button to stop the tape player and resume
radio play.
*
[AS07000( X)08/95]
Using the Dolby
B noise reduction feature
*
[AS07100( X)09/95]
NOTE: Noise reduction system manufactured under license
from Dolby Labs Licensing Corporation.“Dolby”and
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
[AS07200( X)07/95]
Push thekbutton to activate. When activated, the light
above thekbutton illuminates.
*
[AS07300( X)08/95]
Tape error messages
*
[AS07400( X)08/95]
Your cassette tape player is equipped to diagnose certain
problems you may experience. Error codes are as follows:
*
[AS07500( X)01/95]
TD E1—Radio tries to change sides of tape 3 times in a 10
second span. Push“EJECT”and try another tape. If problem
persists, refer problem to qualified personnel for service.
*
[AS07600( X)01/95]
TD E2—Tape eject failure. Radio tries to eject tape and it will
not eject. Push“EJECT”to eject tape. If the tape will not eject,
refer problem to qualified personnel for service.
*
[AS07700( X)01/95]
TD E3—Loading error. Push“EJECT”to eject tape. Reload
tape. If the same error code appears in the display, try another
tape.
[AS07705( X)09/94]
Rear Seat Radio Controls (If equipped)
[AS07710( X)09/94]
Rear seat radio controls are available on vehicles equipped with
Premium and Luxury Audio Systems only.
[AS07715( X)09/94]
The rear seat radio controls are located on the rear of the center
console. These controls duplicate several radio functions of the
radio and allow the use of headphones in the vehicle.
File:09unasx.ex
Update:Thu Feb 29 09:08:53 1996