1995 TOYOTA SUPRA oil capacity

RECOMMENDED TOOLS
TOYOTA Electrical Tester Set
LUBRICANT 
 Item
 
 Capacity
 
 Classification
 Compressor oil ± ND±OIL 8 or equivalent
  When replacing receiver 10 cc (0.34 fl.oz.) 
  When replacing condenser 40 cc (1.4 fl.oz.) 
  When replacing evaporator 40 cc (1.4 fl.oz.) 
  When replacing compressor 140 cc (4.8 fl.oz.) 
AC±10± AIR CONDITIONING SYSTEMPREPARATION

A340E (2JZ-GTE) AUTOMATIC TRANSMISSIONPREPARATION -
AT-12
EQUIPMENT
Feeler gaugeCheck major clearance.
Vernier calipersCheck length of second coast
brake piston rod.
Dial indicator or dial indicator with magnetic baseCheck piston stroke and play of
the output shaft.
Dial indicatorCheck inside diameter of major
bushing.
Straight edgeCheck side clearance of oil pump.
Torque wrench
Cylinder gaugeCheck inside diameter of the
transmission case rear bushing.
Ohmmeter
Voltmeter
Ammeter(A)
LUBRICANT
ItemCapacityClassification
Dry fill
Drain and refill8.2 liters (8.7 US qts, 7.2 Imp. qts)
1.9 liters (2.0 US qts, 1.7 Imp. qts)ATF Type T-II or equivalent
SSM (SPECIAL SERVICE MATERIALS)
08826-00090Seal Packing 1281,
THREE BOND 1281 or equivalent
(FIPG)Oil pan
08833-00070Adhesive 1324,
THREE BOND 1324 or equivalentTorque converter clutch housing
Extension housing
PNP switch
AT0D8-03
AT0D9-02
AT0DA-05

A340E(Others) AUTOMATIC TRANSMISSIONPREPARATION -
AT-14
09350-36010TOYOTA Automatic Transmission
Tool Set
(09350-06090)Plate
09610-20012Pitman Arm PullerRemove oil pump.
RECOMMENDED TOOLS
09031-00030Pin Punch .
EQUIPMENT
Feeler gaugeCheck major clearance.
Vernier calipersCheck length of second coast
brake piston rod.
Dial indicator or dial indicator with magnetic baseCheck piston stroke and end play
of the output shaft.
Dial indicator with magnetic baseCheck inside diameter of major
bushing.
Straight edgeCheck side clearance of oil pump.
Torque wrench
Cylinder gaugeCheck inside diameter of the
transmission case rear bushing.
LUBRICANT
ItemCapacityClassification
Dry fill
Drain and refill7.2 liters (7.6 US qts, 6.3 Imp. qts)
1.6 liters (1.7 US qts, 1.4 lmp. qts)DEXRON® II
SSM (SPECIAL SERVICE MATERIALS)
08826-00090Seal Packing 1281,
THREE BOND 1281 or equivalent
(FIPG)Oil pan
AT054-03
AT055-03
AT056-09
AT057-05

RECOMMENDED TOOLS
09082±00050 TOYTOA Electrical Tester Set
EQUIPMENT
 
 Vernier calipers 
 Check torque converter clutch
installation.
 
Dial indicator with magnetic baseCheck drive plate runout. Dial indicator with magnetic baseCheck drive late runout.
 
 Straight edgeCheck torque converter clutch
installation.
 
To rque wrench Torque wrench
LUBRICANT
 Item Capacity Classification
 Automatic transmission fluid
Dry fill7 2 liter (7 6 US qts 6 3 lmpqts)ATF DEXRON[II 
 
Dry fill
Drain and refill
7.2 liter (7.6 US qts, 6.3 lmp.qts)
1.6 liter (1.7 US qts, 1.4 lmp.qts)
ATF DEXRON[ II
SSM (SPECIAL SERVICE MATERIALS)
 
 
 
088260±0090 
 
 
Seal Packing 1281.
THREE BOND 1281 or equivalent
(FIPG) 
 
 
Transmission X Oil pan
± AT340E (2JZ±GE) AUTOMATIC TRANSMISSIONPREPARATIONAT1±13

PRELIMINARY CHECK
1. CHECK FLUID LEVEL
HINT:
wDrive the vehicle so that the engine and transmission
are at normal operating temp..
Fluid temp. 70±80 °C (158±176 °F)
wOnly use the COOL range on the dipstick as a rough
reference when the fluid is replaced or the engine does
not run.
(a) Park the vehicle on a level surface and set the parking brake.
(b) With the engine idling and the brake pedal depressed, shift
the shift lever into all positions from P to L position and return
to P position.
(c) Pull out the transmission dipstick and wipe it clean.
(d) Push it back fully into the pipe.
(e) Pull it out and check that the fluid level is in the HOT range.
If the level is at the low side, add fluid.
Fluid type:
DEXRON[ II
NOTICE: Do not overfill.
2. CHECK FLUID CONDITION
If the fluid smells burnt or is black, replace it.
3. REPLACE TRANSMISSION FLUID
(a) Remove the drain plug and drain the fluid.
(b) Reinstall the drain plug securely.
(c) With the engine OFF, add new fluid through the oil filler pipe.
Fluid type:
DEXRON[ II
Capacity:
Dry fill: 7.2 liters (7.6 US qts, 6.3 Imp. qts)
Drain and refill: 1.6 liters (1.7 US qts, 1.4 Imp. qts)
(d) Start the engine and shift the shift lever into all positions from
P to L position and then shift into P position.
(e) With the engine idling, check the fluid level. Add fluid up to the
COOL level on the dipstick.
(f) Check the fluid level at the normal operating temperature
70±80 5C (158±176 5F) and add as necessary.
NOTICE: Do not overfill.
4. CHECK FLUID LEAKS
Check for leaks in the transmission.
If there are leaks, it is necessary to repair or replace O±rings,
seal packings, oil seals, plugs or other parts. AT1±42
± AT340E (2JZ±GE) AUTOMATIC TRANSMISSIONTROUBLESHOOTING

09992±00094 Automatic Transmission Oil
Pressure Gauge Set
09082±00050 TOYOTA Electrical Toaster Set
RECOMMENDED TOOLS
EQUIPMENT
 Straight edge Check torque converter clutch
installation.
 
Vernier calipersCheck torque converter clutch Vernier cali ersCheck torque converter clutch
installation. 
 Dial indicator or dial indicator with magnetic baseMeasure drive plate runout
 
 
Torque wrench
LUBRICANT
 Item Capacity Classification
 Automatic transmission fluid
Dry fill8 2 liters (8 7 US qts 7 2 lmpqts)ATF TYPE T II or Equivalent 
 
Dry fill
Drain and refill
8.2 liters (8.7 US qts, 7.2 lmp. qts)
1.9 liters (2.0 US qts, 1.6 lmp. qts)
ATF TYPE T±II or Equivalent
SSM (Special Service Materials)
 
 
 
08826±00090 Seal Packing 128
THREE BOND 1281 or equivalent
(FIPG) 
 
 
Oil pan
± A340E (2JZÐGTE) AUTOMATIC TRANSMISSIONPREPARATIONAT2±13

PRELIMINARY CHECK
1. CHECK FLUID LEVEL
HINT:
wDrive the vehicle so that the engine and transmission
are at normal operating temperature.
Fluid temp.: 70±805C (158±1765F)
wOnly use the COOL position on the dipstick as a rough
reference when the fluid is replaced or the engine does
not run.
(a) Park the vehicle on a level surface and set the parking brake.
(b) With the engine idling and the brake pedal depressed, shift
the shift lever into all positions from P to L position and return
to P position.
(c) Pull out the oil level gauge and wipe it clean.
(d) Push it back fully into the pipe.
(e) Pull it out and check that the fluid level is in the HOT position.
If the level is at the low side, add fluid.
Fluid type:
ATF TYPE T±II or Equivalent
NOTICE: Do not overfill
2. CHECK FLUID CONDITION
If the fluid smells burnt or is black, replace it.
3. REPLACE TRANSMISSION FLUID
(a) Remove the drain plug and drain the fluid.
(b) Reinstall the drain plug securely.
(c) With the engine OFF, add new fluid through the oil filler pipe.
Fluid type:
ATF TYPE T±II or Equivalent
Capacity:
Dry fill: 8.2 liters (8.7 US qts, 7.2 Imp. qts)
Drain and refill: 1.9 liters (2.0 US qts, 1.6 Imp. qts)
(d) Start the engine and shift the shift lever into all positions from
P to L position and then shift into P position.
(e) With the engine idling, check the fluid level. Add fluid up to the
COOL level on the dipstick.
(f) Check the fluid level at the normal operating temperature
70±805C (158±1765F) and add as necessary.
NOTICE: Do not overfill.
4. CHECK FLUID LEAKS
Check for leaks in the transmission.
If there are leaks, it is necessary to repair or replace O ±rings,
seal packings, oil seals, plugs or other parts. AT2±42
± A340E (2JZÐGTE) AUTOMATIC TRANSMISSIONTROUBLESHOOTING

LUBRICANT
 Item Capacity Classification
 
 
 
 
 
Engine oil (2JZ±GE)
Dry fill
Drain and refill
w/ Oil filter change
w/o Oil filter change 
 
 
 
 
6.5 liters (6.9 US qts, 5.7 Imp. qts)
5.3 liters (5.6 US qts, 4.7 Imp. qts)
4.9 liters (5.2 US qts, 4.3 Imp. qts)
 
 
 
 
 
API grade SH, Energy±Conserving II
mutigrade engine oil or ILSAC multigrade
engine oil and recommended viscosity oil,
with SAE 5W±30 being preferred engine oil
 
 
 
 
Engine oil (2JZ±GTE)
Dry fill
Drain and refill
w/ Oil filter change
w/o Oil filter change 
 
 
 
6.5 liters (6.9 US qts, 5.7 Imp. qts)
5.0 liters (5.3 US qts, 4.4 Imp. qts)
4.7 liters (5.0 US qts, 4.1 Imp. qts)
 
 
 
 
API grade SH, Energy±Conserving II
mutigrade engine oil or ILSAC multigrade
engine oil and recommended viscosity oil
SSM (SPECIAL SERVICE MATERIALS)
 
 
 
 
08826±00080 Seal Packing Black or equivalent
(FIPG) 
 
 
 
Oil pump
No.1 oil pan
No.2 oil pan
 
 
 
08833±00080 Adhesive 1344,
THREE BOND 1344,
LOCTITE 242 or equivalent 
 
 
Oil pressure switch
Idler pulley pivot bolt
EG±360± ENGINELUBRICATION SYSTEM