1995 RENAULT MEGANE SCENIC engine

ENGINE SUSPENSION
Suspended engine mountings
19
TIGHTENING TORQUES (in daN.m)F3R ENGINE
99308R
*Tighten the stud to 6 daN.m
**Tighten the nut to 4 daN.m
19-30

ENGINE SUSPENSION
Suspended engine mountings
19
TIGHTENING TORQUES (in daN.m)F8Q ENGINE
99309R1
*Tighten the stud to 6 daN.m
**Tighten the nut to 4 daN.m
19-31

ENGINE SUSPENSION
Engine mounting pads
19
TIGHTENING TORQUES (in daN.m)
PRG19.1
E7J/K7M ENGINE
19-32

ENGINE SUSPENSION
Engine mounting pads
19
TIGHTENING TORQUES (in daN.m)K7M ENGINE / AT
PRG19.2
19-33

85873S 90693R3
CLUTCH
Identification
20
ENGINE
TYPEMECHANISMPLATE
180 DST 3050
E7JBC= White
BU= Blue
R= Red
N= Black
76906R 90693R4 85873S
180 CP 3300 E7J
26 splines
E = 8.5 mm
D = 181.5 mm
76906R
V= Green
G= Grey blue
B= White 26 splines
E = 8.3 mm
D = 181.5 mm
20-1

90693R6 85873S
F8Q
CLUTCH
Identification
20
ENGINE
TYPEMECHANISMPLATE
200 HR 4000 R= Light pink
76906R 90693R5 85873S
K7M
26 splines
D = 200 mm
E = 8.3 mm
200 HRV 3100 R= Red
V= Green
J= Yellow
76906R
26 splines
D = 200 mm
E = 8.3 mm
20-2

CLUTCH
Fault finding
20
The clutch is slipping :
- when stopped, handbrake on, at 2000 to
3000 rpm, impossible to stall the engine
when letting the clutch in,
- with 4th or 5th gear engaged, the engine
seems to race.
Check the travel of
the fork (1)
INCORRECT
KEY
Fault found
Check
Operations to be
carried out
(*)Depending on version
(1)See "Removal - Refitting" chapter(2)Grommet placed on the end of the clutch
cable on the gearbox end Check the
clearance
INCORRECTCORRECT
CORRECTINCORRECT
CORRECT
Check the
condition of the
pins and support
points
INCORRECT
Replace the
faulty partsCheck the condition
of the pedal and the
assistance spring (*)
Replace the
faulty parts
Replace the
fork
OILYWORN
Check the condition
of the clutch
Replace the
clutchReplace the clutch and
repair the leak
INCORRECT
Repair the
automatic
adjustment
device
INCORRECTCORRECT
CORRECT
Check the
automatic
adjustment device
CORRECT
Check the condition
of the cable and the
anti-noise rubber
washer (2)
Check the
condition of the
fork
20-5

CLUTCH
Fault finding
The gearbox clunks.
Clutch pedal fully pressed down :
- vehicle stationary,
- engine running.
INCORRECTCORRECT
Check the automatic
adjustment system
INCORRECT INCORRECT CORRECT
Replace the clutch fork or
check that it is correctly
positioned
CORRECT
Replace the faulty
parts
Replace the faulty
parts
Toothed sector
jammed or spring
broken
INCORRECT
CORRECTINCORRECT
Clutch stuck
Free the clutch
Rare case, may occur
after the vehicle has been
stopped for a long time
(several months)
Replace the faulty parts
Clutch operation
Check the condition
of the pedal
CORRECT
20
(1)Grommet placed on the end of the clutch cable on
the gearbox end
Check the condition of
the cable and the anti-
noise rubber washer
(1)
20-6