1995 RENAULT MEGANE SCENIC light

44
UPPER REAR STRUCTURE
Lights mounting (F)

55
EXTERIOR PROTECTION
Headlight washer jet (H)

Contents
GENERAL
Dimensions
Engine and equipment
Identification
Using symbols
Key to symbols
Description of parts (exploded)
Opening clearances40-1
40-2
40-2
40-3
40-5
40-6
40-7
LOWER STRUCTURE
41-1
41-2
41-5
41-7
41-8
41-11
41-14Page Page40
41
Sheet metal work
UPPER SIDE STRUCTURE43
AAbsorber support mounting
BRear floor base
CRear floor base support
DRear floor base front stiffener
ERear end pillar lower reinforcement
FRear end cross member assembly
GRear floor unit
43-1 ATop of bodyNON-SIDE OPENING ELEMENTS
48
TOP OF BODY
SIDE OPENING ELEMENTS45
47
45-1
45-6
45-8
45-10 ARoof
BRoof acoustic cross member
CRoof bow
DRoof rear cross member
47-1
48-1 ATailgate ARear door panel UPPER REAR STRUCTURE
44
44-1
44-10
44-12
44-15
44-20
44-21
44-27
44-31 ARear wing panel
BRear lights mounting
CUpper side drip moulding
DRear pillar reinforcement
ERear inner wheel arch
FRear quarter panel lining assembly
GOuter wheel arch
HRear end panel

GENERAL
Description of parts (exploded view)
40
PRE4005
290 Roof
* 291 Roof rear cross member
292 Absorber support
293 Rear end panel
294 Lights mounting
295 Tailgate
* 296 Wing panel
* 297 Top of body
* 298 Rear door
* 299 Rear door panel
300 Rear end pillar lower reinforcement
* 301 Rear end cross member
302 Emergency spare wheel mounting sup-
port
303 Rear floor base
* Parts for which repaired areas must be electro zinc plated304 Base support
305 Base stiffener
* 306 Sill panel
* 307 Front pillar
* 308 Body side, front section
309 Rear floor unit
310 Rear pillar reinforcement
* 311 Rear quarter panel lining assembly
312 Inner wheel arch
313 Stretcher extension
314 Roof cross member support
* 315 Wing panel drip moulding
316 Speaker support
317 Roof stiffener
40-6

LOWER STRUCTURE
Rear end pillar lower reinforcement
PRE4109
41E
INTRODUCTION
The replacement of this part is a complementary
operation to the rear end cross member.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with welded nuts.
PARTS CONCERNED (thickness in mm) :
1Rear end pillar lower reinforcement 1
2Rear end cross member 0.8
3Body side lining 0.7
4Rear end pillar lining 1
5Rear floor 0.7
6Rear side member 1.2
7Lights mounting 0.7
8Rear end pillar lining 1
41-8

UPPER REAR STRUCTURE
Rear wing panel
INTRODUCTION
This part may be replaced in two ways:
• by part section as a basic operation for a rear
side impact (see diagram),
• completely, as a complementary operation to
the roof.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Part assembled with:
- striker plate reinforcement,
- pin to be welded 3 x2.9,
- soundproofing,
- bumper mounting reinforcement assembly.
PRE4415
44A
or
PARTS CONCERNED (thickness in mm) :
1Wing panel 0.8
2Rear quarter panel lining 0.7
3Sill panel closure panel 1.5
4Rear pillar reinforcement 1
5Rear outer wheel arch 0.7
6Rear upper side drip moulding 1
7Lights moulding 0.7
8Rear end pillar lining 1
9Rear end panel 1
10Rear end pillar lower reinforcement 1
44-1

UPPER REAR STRUCTURE
Rear lights mounting
PRE4416
44B
INTRODUCTION
The replacement of this part is a complementary
operation to the wing panel.
The method described only contains descriptions
of joints specific to the part concerned. Joints with
complementary parts are not included.
These are dealt with in their respective section (re-
fer to the contents page).
COMPOSITION OF PART FROM PARTS
DEPARTMENT
Single part.
PARTS CONCERNED (thickness in mm) :
1Lights mounting 0.7
2Rear upper side drip moulding 1
3Rear end pillar lining 1
4Rear end panel 1
254b01-15380
A
CAA11536-2R7
12
44-10

UPPER REAR STRUCTURE
Rear lights mounting
44B
B
TOK14644-1R2
1
2 3
C
CAB11539R5
31
D
CAE11546-8R2
5
1 2
E
CAB11539R5
51
F
G
CAA11536-2R3
1
2
CAE11546-8R2
4
1 5
44-11