1995 JEEP YJ ABS

[x] Cancel search: ABS

Page 626 of 2158

JEEP YJ 1995  Service And Repair Manual OIL PRESSURE GAUGE
The case grounded oil pressure sensor is a variable
resistor that connects to circuit G6. Circuit G6 con-
nects to the oil pressure gauge.
Circuit F87 connects to the instrument clu

Page 627 of 2158

JEEP YJ 1995  Service And Repair Manual CHARGING SYSTEM INDICATOR LAMP
The Powertrain Control Module (PCM) illuminates
the charging system indicator lamp by providing
ground for the lamp on circuit G12. Circuit G12 con-
nects to cavity 36 o

Page 682 of 2158

JEEP YJ 1995  Service And Repair Manual TURN SIGNALS
COMBINATION FLASHER
In the ACCESSORY or RUN position, the ignition
switch connects circuit A1 from fuse 6 in the Power
Distribution Center (PDC) to circuit A48. Circuit A48
feeds circuit

Page 785 of 2158

JEEP YJ 1995  Service And Repair Manual CONNECTOR LOCATIONS
GENERAL INFORMATION
This section provides illustrations identifying com-
ponent and connector locations in the vehicle. A con-nector index is provided. Use the wiring diagrams in
e

Page 799 of 2158

JEEP YJ 1995  Service And Repair Manual Fig. 13 Stop Lamp Switch, Blower Motor and ABS Control Module Wiring Connectors
J8W-90 CONNECTOR LOCATIONSÐXJ VEHICLES 8W - 90 - 15

Page 800 of 2158

JEEP YJ 1995  Service And Repair Manual Fig. 14 Steering Column, Fuse Panel and ABS Control Module Wiring Connectors
8W - 90 - 16 8W-90 CONNECTOR LOCATIONSÐXJ VEHICLESJ

Page 805 of 2158

JEEP YJ 1995  Service And Repair Manual Fig. 19 ABS Sensors Wiring Connections
Fig. 20 Rear Compartment Wiring Connectors
J8W-90 CONNECTOR LOCATIONSÐXJ VEHICLES 8W - 90 - 21

Page 809 of 2158

JEEP YJ 1995  Service And Repair Manual SPLICE LOCATIONS
GENERAL INFORMATION
This section provides illustrations identifying the
general location of the splices in this vehicle. A splice
index is provided. Use the wiring diagrams in each
se