Downloaded from www.Manualslib.com manuals search engine Q: What’s wrong with this?
A: The belt is twisted across the body.
You can be serioudy injured by a twisted belt. In a crash, you
wouldn’t have the full width of the belt to spread impact forces.
Ifa belt is twisted, make it straight so it can work properly, or
ask your dealer to fix it.
29
Downloaded from www.Manualslib.com manuals search engine While the tires available as standard or optional equipment on General
Motors vehicles may vary with respect to these grades, all such tires meet
General Motors performance standards and have been approved for use
on General Motors vehicles. All passenger type (P Metric) tires must
conform to Federal safety requirements
in addition to these grades.
Wheel Alignment and Tire Balance
The wheels on your vehicle were aligned and balanced carefully at the
factory to give you the longest tire
life and best overall performance.
In most cases,
you will not need to have your wheels aligned again.
However,
if you notice unusual tire wear or your vehicle pulling one way
or the other, the alignment may need to be reset. If you notice your
vehicle vibrating when driving on a smooth road, your wheels may need
to be rebalanced.
meel Replacement
Replace any wheel that is bent, cracked or badly rusted. If wheel nuts
keep coming loose, the wheel, wheel bolts,
and wheel nuts should be
replaced. If the wheel leaks air out, replace it (except some aluminum
wheels, which can sometimes be repaired). See your Cadillac dealer if any
of these conditions exist.
Your dealer
will know the kind of wheel you need.
Each new wheel should have the same load carrying capacity, diameter,
width, offset, and be mounted the same way as the one it replaces.
If you need to replace any of your wheels, wheel bolts, or wheel nuts, replace
them only with new
GM original equipment parts. This way, you will be sure
to have the right wheel, wheel bolts, and wheel nuts for your Ca\
dillac model.
A CAUTION
Using the wrong replacement wheels, wheel bolts, or wheel nuts \
on your vehicle can be dangerous. It could affect the
braking
and handling of your vehicle, make your tires lose air and make
you lose control. You could have a collision in which you or
others could be injured. Always use the correct wheel, wheel
bolts, and wheel
nuts for replacement.
313
Downloaded from www.Manualslib.com manuals search engine 4.9 LITER ENGINE
Displacement ............................... .4.9L (300 cuin.)
No.
of Cylinders .............................. 8 - 90 Degree V
Power (Acc. to SAE 51349) ............... 200 (bhp @ 4100 rpm
Torque (ACC.
to SAE 51349) ............ 275 (lbs. ft. @ 3000 rpm
Bore
....................................... 92mm (3.623 in.)
Stroke
..................................... 92mm (3.623 in.)
Compression Ratio
.................................... 9.5: 1
Cyiinder Block ........................... Die Cast Aluminum
Cylinder Block Bore Liners
......................... Cast Iron
Cylinder Head
.................................... Cast Iron
Intake Manifold
.............................. Cast Aluminum
Valve System
.......................... Roller Hydraulic Lifters
Intake Valve
................................ 45mm (1.772 in.)
Exhaust Valve
............................... 38mm (1.496 in.)
Pistons
...................................... Cast Aluminum
Firing Order
.................................. 1-8-4-3-6-5-7-2
Left Bank
.......................................... 1-3-5-7
Right Bank
......................................... 2-4-6-8
Camsha
............................................... Steel
Width.
..................................... 16.2mm (0.64 in.)
Pitch
..................................... .12.7mm (0.50 in.)
Drive Vpe
.......................................... Chain
Crankshaft
............................. Pearlitic Nodular Iron
..................................... 150 (kW @ 4100 rpm
.................................... 375 (Nom @ 3000 rpm
1
1
I
Main Bearings ........................................... 5
346
Downloaded from www.Manualslib.com manuals search engine FLUID CAPACITIES
Transaxle (4T6OE) .............................. 20 pts. (9.5 L)
Transaxle (4T80E)
.............................. 30 pts. (14 L)
Engine Oil (4.9 L)
............................ 5 quarts (4.7 L)
With Filter Change ........................... 5.5 qts (5.2 L)
Engine Oil (4.6 L)
.............................. 6.5 qts (6.2 L)
With Filter Change ............................ 7 qts (6.6 L)
Engine Cooling System
........................ 12.3 qts (1 1.7 L)
Fuel Tank .................................. 20 gallons (76 L)
Power Steering .............................. 1.3 quarts (1.2 L)
Windshield Washer Reservoir .................. 4.2 quarts (4.1 L)
TIGHTEN TORQUE
Spark Plugs (4.9 L) ........................ .20 Nqm (15 lbs. ft.)
Spark Plugs (4.6
L) ......................... 15 Nom (11 lbs. ft.)
Oil Pan Drain Plug (4.9 L)
................... 30N-m (22 Ibs. ft.)
Oil Pan Drain Plug (4.6 L) ................... 20N.m (15 lbs. ft.)
KEHICLE DIMENSIONS
Seville/STS
Shipping Weight .......................... 3595 lbs. (1630.5 kg)
Shipping Weight
(STS) .................... 3807 lbs. (1726.8 kg)
Wheel Base
................................ 111 in. (2819 mm)
Length .................................. .203.9 in. (5179 mm)
Height ................................... .54.0 in. (1371 mm)
Width.. .................................. .74.3 in. (1887 mm)
Front Tread ............................... .60.9 in. (1547 mm)
Rear Tread ............................... .60.9 in. (1547 mm)
349
