21-12 MANUAL TRANSAXLE - Special Tools/Troubleshooting
I
IICPintermediate shaft lock nut
MD998819Installer adapterInstallation of differential case bearing
TROUBLESHOOTINGNZlEAABsSymptomVibration, noise
3il leakage
Hard shift
Jumps out of gearProbable causeRemedy
a. Loose or damaged transaxle anda. Tighten or replace mounts
engine mounts
b. Inadequate shaft end playb. Correct end play
c. Worn of damaged gears
c. Replace gears
d. Use of inadequate grade of oild. Replace with specified oil
e. Low oil level
e. Replenish
f. Inadequate engine idle speed
f. Adjust idle speed
a. Broken or damaged, oil seal or O-ringa. Replace oil seal or O-ring
a. Faulty control cable
a. Replace control cable
b. Poor contact or wear of synchronizer ring
and gear coneb. Correct or replace
c. Weakened synchronizer springc. Replace synchronizer spring
d. Use of inadequate grade of oil
d. Replace with specified oil
a. Worn gear shift fork or broken poppet
springa. Replace shift fork or poppet spring
b. Synchronizer hub to sleeve spline
clear-ante too largeb. Replace synchronizer hub and sleeve