13-402AUTO-CRUISE CONTROL SYSTEM - service Adjusbnent PWSXIU~S
PARK/NEUTRAL POSITION SWITCH (“N” AND “P”
POSITIONS) INSPECTION
(1) Disconnect the connector.
(2) Check to be sure that there is continuity ,between
connector terminals 8 and 9 when the shift lever IS moved
to the “N”
range.
ACTUATOR INSPECTION
(1) Disconnect the connector.(2) Measure the resistance value of the clutch coil.
Resistance of clutch coil between connector terminals
(1) - (3)
Standard value: Approx.
2Ofl
ACTUATOR OPERATION CHECK
Disconnect the actuator’s connector and, in the
ordey de-
scribed below, check the actuator’s operation and the clrcult
tester’s indication; replace the actuator assembly if any
abnormal condition is discovered.
(1) Checking the clutch coil solenoid operation Connect terminal (3) of the actuator through the
ammeter
to the positive
(+) terminal of the battery, and connect
terminal (1) to the negative
(-) terminal.
Actuator
Actuator side cO/nectOr16R10801SR1032
rJudaement
Normal
Solenoid operation
sound (“click”) can be
heard.
T
-t
A, : 0.5-0.7A
NOTENC: ON at all times No solenoid sound
A,=
mA
Short-circuit of clutch coil
NO: OFF at all
times
TSB RevisionI
