TURBOCHARGER SYSTEM - Turbocharaer
6. CONNECT UNION PIPE
Connect--the uriion pipe with the union bolt and new
gaskets.
’
6-i
6. CONNECT NO.1 TURBO WATER HOSE TO WATER
OUTLET HOUSING
7. INSTALL NO.2 TURBOCHARGER STAY
8. INSTALL TURBOCHARGER STAY
Torque:
To turbocharger
810 kg-cm (59 ft-lb, 70 N-m)
To engine mounting bracket
680 kg-cm (43 ft-lb, 68 N-m)
9. CONNECT FRONT EXHAUST PIPE
(a) Install a new gasket to the front exhaust pipe.
(b) Connect the front exhaust pipe to the exhaus
manifold with three new nuts.
Torque: 630 kg-cm (46 ft-lb, 62 Nem)
8 SYS
NTEM - - Turbocharger
(cl Install
the front exhaust pipe
clamp. TC-17
10. Ih$TA& NO.1 AIR CLEANER PIPE WITH NO.6 AIR
.-GLEANER HOSE I
.
(a)
Install the No.1 air cleaner pipe with No.6 air cleaner
hose to the No.5 air cleaner hose and turbocharger.
(b) Connect the No.1 air cleaner pipe to bracket with the
bolt.
Torque:
130 kg-cm (9 ft-lb, 13 N-m)
(c) Tighten the No.5 and No.6 air hose clamps.
11 i INSTALL “OIL DIPSTICK GUIDE
‘(a) ‘.‘lnstall a new O-ring to the oil dipstick guide.
lb) ,-insert the oil dipstick guide to the No.2 oil dipstick
: ‘/
guide.
(c) Connect the oil dipstick guide to the turbocharger
with the bolt.
(d) Install the oil dipstick.
12. INSTALL TURBO HEAT INSULATOR
(a) Install the turbo heat insulator and plate washer with
the three nuts.
(b) Connect oxygen sensor connector.
13. INSTALL NO.7 AIR CLEANER HOSE WITH AIR
FLOW METER AND AIR CLEANER CAP
(a) Install the No.7 air cleaner hose with air flow meter
and air cleaner cap.
(b) Install the bolt and tighten the clamps.
