1987 TOYOTA CELICA oil filter

-.
LUBRICATION SYSTEM
- Replacement.of Engine Oil and Oil Filter
L&.7*.
(d) Lightly screw in the oil filter to where you feel resis-
tance.
(el Then, using SST, tighten.the oil filter an extra 3/4
turn. .
SST 09228-07500
3. FILL WITH ENGINE OIL
(a) Clean and install the oil drain plug with a new gasket.
Torque: 350 kg-cm (25 ft-lb, 34 N.m)
(b) Fill the engine with new oil.
Oil capacity:
Dry fill
7M-GE MA (GCC Countries*)
5.0 liters (5.3 US qts, 4.4 Imp. qts)
‘/M-GE MA (Others)
4.9 liters (5.2 US qts, 4.3 Imp. qts)
7M-GE MS
5.3 liters (5.6 US qts, 4.7 Imp. qts)
7M-GTE (A/T)
5.0 liters (5.3 US qts, 4.4 Imp. qts)
7M-GTE (M/T)
5.1 liters (5.4 US qts, 4.5 Imp. qts)
Drain and refil
w/o oil filter change
MA
3.9 liters (4.1 US qts, 3.4 Imp. qts)
MS
4.1 liters (4.3 US qts, 3.6 Imp. qts)
w/ oil filter change
MA
4.2 liters (4.4 US qts, 3.7 Imp. qts)
MS
4.4 liters (4.7 US qts, 3.9 Imp. qts)
4.
START ENGINE AND CHECK FOR LEAKS
5. RECHECK ENGINE OIL LEVEL (See page LU-5)
’ GCC Countries: Soudi Arabia, Sultanate of Oman,
Bahrain, United Arab Emirates, Qatar, Kuwait.

-.
LU-6
LUBRICATION SYSTEM - Replacement-of Engine Oil and Oil Filter
REPLACEMENT OF ENGINE OIL
AND OIL FILTER
1.
DRAIN ENGINE OIL
(a) Remove the oil filler cap.
(b) Remove the oil drain plug and drain the oil into a con-
tainer.
2.
REPLACE OIL FILTER
(a) Using SST, remove the oil filter (located on right side
of the engine block).
SST 09228-07500
NOTE (7M-GTE):
Remove the oil filter taking it over the
engine mounting bracket and down between the bracket
and No. 1 suspension crossmember.
(b)
Clean and check the oil filter installation surface.
(c) Apply clean engine oil to the gasket of the new oil
filter. o

-.
LUBRICATION SYSTEM
- Replacement.of Engine Oil and Oil Filter
L&7_
4.
5. (d) Lightly screw in the oil filter to where you feel resis-
tance.
(e) Then, using SST, tighten. the oil filter an extra 3/4 .
turn.
SST 09228-07500
FILL WITH ENGINE OIL
(a) Clean and install the oil drain plug with a new gasket.
Torque: 350 kg-cm (25 ft-lb, 34 N-m)
(b) Fill the engine with new oil,
Oil capacity:
Dry fill
7M-GE MA (GCC Countries*)
5.0 liters (5.3 US qts, 4.4 Imp. qts)
7M-GE MA (Others)
4.9 liters (5.2 US qts, 4.3 Imp. qts)
7M-GE MS
5.3 liters (5.6 US qts, 4.7 Imp. qts)
7M-GTE (A/T)
5.0 liters (5.3 US qts, 4.4 Imp. qts)
7M-GTE (M/T)
5.1 liters (5.4 US qts, 4.5 Imp. qts)
Drain and refil
w/o oil filter change
MA
3.9 liters (4.1 US qts, 3.4 Imp. qts)
MS
4.1 liters (4.3 US qts, 3.6 Imp. qts)
w/ oil filter change
MA
4.2 liters (4.4 US qts, 3.7 Imp. qts)
MS
4.4 liters (4.7 US qts, 3.9 Imp. qtsl
START ENGINE AND CHECK FOR LEAKS
RECHECK ENGINE OIL LEVEL (See page LU-5)
l GCC Countries: Soudi Arabia, Sultanate of Oman,
Bahrain, United Arab Emirates, Qatar, Kuwait.

OIL COOLER AND OIL PRE&ljRE
REGULATOR ijM-GTE)
COMPONENTS
Union Bolt
/ + Gasket
Oil Filter Bracket
(Oil Pressure Regulator)
+ O-Ring
Relief Valve
No. 1 Oil Cyler Bracket
./-Oil Filter
& Non-reusable part
LU0572 LUO5!
MIT
-+ Gasket
-Oil Cooler Hose
REMOVAL AND DISASSEMBLY OF OIL
FILTER BRACKET
1. REMOVE OIL FILTER BRACKET
Remove the union bolt, gasket, oil filter bracket and O-
ring.
2. REMOVE OIL FILTER
(See page LU-6)
3. REMOVE RELIEF VALVE
Unscrew the plug, and remove the spring, relief valve and
gasket.

LUBRICATION SYSTENI - Oil Cooler and Oil Pressurr+ Regulator (7M-GTE)
’ 1” - 06Lu-19
---. “, -“-~~yII.
. .
INSPECTION OF RELIEF VALVE
Coat the valve with engine oil and check that it falls
smoothly into the valve hole by its own weight.
If it does not, replace the relief valve. If necessary,
replace
the oil filter bracket assembly.
INSTALLATION OF OIL ASSEMBLY AND
FILTER BRACKET
(See page LU-18)
1. INSTALL RELIEF VALVE
(a) Install the relief valve and spring.
(b) Install and torque the plug with a new gasket.
Torque: 375 kg-cm (27 ft-lb, 37 Nsm)
2.
INSTALL OIL FILTER
(See page LU-8)
3. INSTALL OIL FILTER BRACKET
(a) Install a new O-ring to bracket.
(b) Install a new gasket to union bolt.
(c) Put the oil filter bracket hole over the cylinder block
stud bolt and install the oil filter bracket with the
union bolt.
(d) Torque the union bolt.
Torque: 500 kg-cm (36’ ft-lb, 49 N*mI

A12 : SERVICE SPECIFICATIONS - Enaine.Mechanical
EN$W4~~~WlECHAN~CAL (
‘t&.gy,.::*,. : .,
Speclfrcations
r
: r’
: . .
‘-’ b- ~.
” Drive belt deflection or tension
. . . .,:
;Water Pump - Alternator New belt
,, ‘Crankshaft Used belt
- PS pump New belt
..!
Used belt
-Crankshaft - A/C compressor
New hit MA
,.
‘; MS
Used belt MA
<” : MS
Engine coolant capacity
MA
WI Heater or air con.
,.
w/o Heater or air con.
MS (GCC Countires’)
WI Heater or air con.
w/o Heater or air con.
MS (Others)
w/ Heater or air con.
w/o Heater or air con.
Engine oil capacity
Dry fill
7M-GE MA (GCC Countires’)
7M-GE MA (Others)
7M-GE MS
7M-GTE (M/T)
7M-GTE (A/T)
Drain and refill
w/o Oil filter change
MA
MS
w/ Oil filter change
MA
MS
Battery specific gravity
High-tension cord resistance
Spark plug
Conventional tipped type
We
Air gap
Platinum tipped type
Type 7M-GE
7M-GTE
Air gap 7M-GE
7M-GTE M/T
A/T
M/T
A/T
Limit
ND
NGK
ND
NGK
ND
NGK / w/ IO, kg (22.1 lb, 98 N) w/ SST (Reference)
,. .
IO 7 1.2:mm .0.39 - 0.47 in. 70 - 80 kg
I5 -, 17 mm 0.59 - 0.87 in. 30 - 45 kg
I- 8mm 0.28 - 0.31 in. 55 - 65 kg
3-llmm 0.35 - 0.43 in. ” 25 -‘40 kg
7 1 9.5‘mm 0.28 - 0.374 in. 53 - 77 kg
7;.5 - 9.5 mm 0.295 - 0.374 in. 53 - 77 kg
10.5 .- 12 mm 0.413 - 0.47 in. 30 - 40 kg
IO - 13.,mm
0.39 - 0.51 in. 30 - 40 kg
8.1 liters
8.0 liters.
7.5 liters
7.4 liters
8.5 liters
7.8 liters
7.8 liters
7.1 liters 8.5 US qts
8.5 US qts
7.9 us qts
7.8 US qts
9.0 us qts
8.2 US qts
8.2 US qts
7.5 us qts 7.1 Imp. qts
7.0 Imp. qts:
6.8 Imp. qts
6.5 Imp. qts
7.5 Imp. qts
6.9 Imp. qts
6.9 Imp. qts
6.2 Imp. qts
5.0 liters
4.9 liters
5.3 liters
5.1 liters
5.0 liters 5.3 us qts
5.2 US qts
5.6 US qts
5.4 us qts
5.3 us qts 4.4 Imp. qts
4.3 Imp. qts
4.7 Imp. qts
4.5 Imp. qts
4.4 Imp. qts
3.9 liters 4.1 US qts 3.4 Imp. qts
4.1 liters 4.3 us qts 3.6 Imp. qts
4.2 liters 4.4 us qts 3.7 Imp. qts
4.4 liters 4.7 us qts 3.9 Imp. qts
1.25 - 1.27 when fully charged at 20°C (68°F)
25 kn per cord
Q20R-U
BCPRGEY
0.8 mm b.03 1
PQ16R
8CPR5EPll
PQ20R-P8
BCPRGEP-N8 in.
1.1 mm 0.043 in.
0.8 mm 0.031 in.
,:‘GCC Countries:
~~ s; Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar, Kuwait.
p;
.5&.,..‘ .,
gg&-&;,., ;.