Page 211 of 687

Canceling the Parking Brake
Automatic Operation
The parking brake automatic operation
returns to automatic operation when
the vehicle power is switched ON.
When canceling the parking brake
automatic operation and parking the
vehicle, shift the selector lever to the P
position and use wheel blocks on the
tires. If one of the following operations
is performed, the parking brake
automatic operation can be canceled
when the vehicle power is switched
from ON to OFF.
Operation method 1
1. Switch the vehicle power ON.
2. Release the parking brake manually.
3. Turn off the AUTOHOLD.
4. Press the EPB switch continuouslyuntil a sound is activated.
5. Release the EPB switch.
6. Switch the vehicle power OFFimmediately after a sound is
activated.
After the parking brake auto
operation is canceled, a warning
sound is activated one time, and
the EPB switch indicator light
switches from illumination to
flashing , and then turns off after a
certain period of time has passed.
Operation method 2
1. Switch the vehicle power ON.
2. Release the parking brake manually.
3. Turn off the AUTOHOLD.
4. With the EPB switch pressed, switch
the vehicle power OFF without
depressing the brake pedal.
After the parking brake auto
operation is canceled, a warning
sound is activated one time, and
the EPB switch indicator light
switches from illumination to
flashing, and then turns off after a
certain period of time has passed.
NOTE
The auto operation may not cancel if
the vehicle is parked on a steep
slope.
When using an automatic car wash
which moves the vehicle with the
front tires mounted, it is necessary to
cancel the parking brake automatic
operation.
Driving
Electric Parking Brake (EPB)
5-60
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 215 of 687

Immediately depress the brake pedal
in the following case.
Because the AUTOHOLD function is
canceled forcibly, the vehicle may
move unexpectedly and result in an
accident.
The message “Depress Brake Pedal.
Brake Hold Disabled” is displayed on
the instrument cluster and the
warning sound is activated at the
same time.
When parking and before leaving the
vehicle, apply the parking brake.
Otherwise, the vehicle may move
unexpectedly and result in an accident.
When parking and before leaving the
vehicle, shift the selector lever to the P
position and apply the parking brake.
CAUTION
If you stop operating the accelerator
pedal before the vehicle starts driving ,
the force holding the vehicle in the
stopped position may weaken. Firmly
depress the brake pedal or depress the
accelerator pedal to start driving the
vehicle.
How to Use the AUTOHOLD
Operating the AUTOHOLD
The AUTOHOLD becomes operational
and the AUTOHOLD standby indicator
light turns on.
Using the AUTOHOLD
1. Stop the vehicle. When all of the following
conditions are met, the
AUTOHOLD operates and the
AUTOHOLD active indicator light
in the instrument cluster
turns on.
The hybrid system is operating.The driver’s seat belt is fastened.The driver’s door is closed.The parking brake is released.
2. Start driving the vehicle. The brakes are released and the
AUTOHOLD active indicator light
in the instrument cluster
turns off.
NOTE
When about 10 minutes or longer
have passed since the AUTOHOLD
operated, the parking brake is
applied automatically. When the
parking brake is released, the
AUTOHOLD operates again.
Driving
AUTOHOLD
5-64
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 216 of 687

When the vehicle power is switched
OFF while the AUTOHOLD is
operating , the parking brake is
applied automatically.
If the selector lever is shifted to the R
position with the vehicle tilted
rearward or on level ground, the
AUTOHOLD is canceled. Operate
the brakes if necessary.
Under the following conditions, the
parking brake is automatically
applied and the AUTOHOLD is
released. The AUTOHOLD is
re-enabled when the conditions
before the AUTOHOLD is released
are restored.
The driver’s seat belt is unfastened.The driver’s door is opened.
Canceling the AUTOHOLD Operation
1. Depress the brake pedal with the AUTOHOLD operating.
2.
The AUTOHOLD operation is
canceled and the AUTOHOLD
standby indicator light turns off.
NOTE
The AUTOHOLD can be turned off
by pressing the AUTOHOLD switch
while driving.
When the vehicle power is switched
OFF while the AUTOHOLD is
operating , the parking brake is
applied automatically and the
AUTOHOLD is turned off.
Driving
AUTOHOLD
5-65
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 229 of 687
Rear Window DefoggerSwitch
The rear window defogger warms the
rear window and removes fog.
When the rear window defogger is
operated, the following equipment
operates in conjunction with it.
Mirror defogger*
Refer to How to Use the Mirror
Defogger on page 5-80.
Windshield wiper de-icer*
Refer to How to Use the Windshield
Wiper De-icer on page 5-81.
Warnings and Cautionsfor Using the Rear
Window Defogger Switch
CAUTION
Be careful not to scratch the
filaments when washing the rear
window. The filaments are installed
inside the rear window.
Use the rear window defogger while
the engine is running. In addition, do
not use the rear window defogger for
a long time. Otherwise, the
lead-acid battery power could be
depleted.
Driving
Rear Window Defogger Switch
5-78*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 235 of 687

Antilock Brake System(ABS)
The ABS prevents the wheels from
locking, caused by braking on slippery
roads, and maintains driving
directional stability and ensures
steerability.
NOTE
When depressing the brake pedal,
slight vibration might be felt from the
pedal. This vibration is a normal
occurrence when the ABS operates.
ABS does not operate at low speeds
(about 10 km/h (6.2 mph) or
slower).
Warning and Cautions forUsing the Antilock Brake System (ABS)
WARNING
Do not rely on the ABS as a substitute
for safe driving.
The ABS cannot compensate for unsafe
and reckless driving, excessive speed,
tailgating (following another vehicle
too closely), driving on ice and snow,
and hydroplaning (reduced tire friction
and road contact because of water on
the road surface). You can still have an
accident.
CAUTION
Always use tires of the specified size
and type for the front and rear wheels.
If a tire other than the specified size or
type is installed, the ABS system may
not operate normally.
Driving
Antilock Brake System (ABS)
5-84
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 237 of 687

How to Use the TractionControl System (TCS)
Switch the vehicle power ON.
The TCS is operable.
When the TCS operates, the TCS/DSC
operation indicator light
flashes.
Stopping the TCS Operation
The TCS operation is canceled and the
TCS OFF indicator light
in the
instrument cluster and the TCS OFF
switch indicator light turn on.
Press the TCS OFF switch again to
enable the TCS operation.
NOTE
If the hybrid system is stopped while
the TCS operation is canceled, the
TCS becomes operational when the
hybrid system is started the next
time.
When the TCS is on and you attempt
to free the vehicle from being stuck,
the TCS will activate. Depressing the
accelerator will not increase engine
power and freeing the vehicle from
being stuck might be difficult. When
this happens, turn off the TCS.
If the TCS is canceled and the
following systems are operated, the
TCS becomes operational.
Smart Brake Support (SBS)
Mazda Radar Cruise Control
(MRCC)
Cruising & Traffic Support (CTS)
Driving
Traction Control System (TCS)
5-86
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 241 of 687

Trailer Stability Control(TSC)
The TSC is a system that increases the
stability of the vehicle during towing.
When vehicle sway occurs during
towing, the TSC controls the output of
the brakes and the hybrid system to
suppress swaying.
Warning and Cautions forUsing the Trailer Stability Control (TSC)
WARNING
Do not rely solely on the Trailer
Stability Control (TSC).
Vehicle stability can be limited even if
the Trailer Stability Control (TSC) is
operating. Drive carefully to prevent
accidents. In particular, if the
TCS/DSC indicator light is flashing ,
drive the vehicle carefully as it is in a
less stable condition and could sway
more easily. Drive with caution and in
accordance with the road, vehicle and
trailer conditions.
CAUTION
The Trailer Stability Control (TSC)
may not operate correctly unless the
following are observed:
Use tires of the correct size
specified for your Mazda on all
four wheels.
Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
Do not mix worn tires.
The Trailer Stability Control (TSC)
may not operate correctly when tire
chains are used or a temporary spare
tire is installed because the tire
diameter changes.
Driving
Trailer Stability Control (TSC)
5-90
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 246 of 687

Mazda intelligent DriveSelect (Mi-Drive)
Mi-Drive is a system that switches the
drive modes depending on the driving
conditions, road conditions and
vehicle conditions. The Mi-Drive has
the following driving modes.
TOWING Mode
*
The vehicle is driven with both engine
and motor power to optimize its
power performance. This mode
reduces the loss of driving
performance due to increased weight
when towing a trailer and improves the
vehicle stability.
SPORT Mode
The vehicle is driven with both engine
and motor power to optimize its
maneuverability performance. This
mode increases vehicle response when
the accelerator pedal is depressed and
accelerates powerfully.
NORMAL Mode
The vehicle is driven so that the engine
and motor are efficiently controlled to
optimize fuel efficiency. If necessary,
the motor can be used as a generator
to charge the high voltage battery. In
addition, when the accelerator pedal is
depressed, the vehicle accelerates
using both engine and motor power.
When the vehicle is driven in NORMAL
mode only by motor power, the EV
drive indicator light
in the
instrument cluster turns on.
EV Mode
The vehicle is driven by motor power
using the electrical power stored in the
high voltage battery.
OFF-ROAD Mode
The vehicle is driven with both engine
and motor power to optimize its
power performance. This mode
prevents the drive wheels from
spinning during off-road driving and
improves the running performance.
Driving
Mazda intelligent Drive Select (Mi-Drive)
*Some models.5-95
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04