2024 MAZDA CX90 instrument panel

1Name of Each Part
Steering Wheel Area
Overview................................. 1-2Steering Wheel Area
Overview.............................. 1-2
Driver's Seat Area Overview....... 1-3 Driver's Seat Area
Overview.............................. 1-3
Instrument Panel Area
Overview................................. 1-4 Instrument Panel Area
Overview.............................. 1-4
Front Cabin Overview................1-5 Front Cabin Overview............ 1-5Rear Cabin Overview.................1-6Rear Cabin Overview............. 1-6
Luggage Compartment
Overview................................. 1-7 Luggage Compartment
Overview.............................. 1-7
Front Exterior Overview............. 1-8 Front Exterior Overview.......... 1-8
Rear Exterior Overview.............. 1-9 Rear Exterior Overview........... 1-9
1-1
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Instrument Panel Area Overview
ƒInstrument cluster............................................................................. page 5-27
„ Active driving display......................................................................... page 5-43
… Hazard warning
flasher switch............................................................ page 5-82
† Mazda Connect.................................................................................. page 7-6
‡ Climate control system (front).............................................................. page 6-6
ˆ Heated steering wheel switch............................................................. page 6-26
‰ Seat warmer switches........................................................................ page 6-23
Š Seat ventilation switches.................................................................... page 6-28
‹ Rear window defogger switch............................................................ page 5-79
ΠREAR switch......................................................................................page 6-19
Rear control switch............................................................................ page 6-19
Ž Glove compartment.......................................................................... page 7-33
Accessory socket............................................................................... page 7-47
Cup holder....................................................................................... page 7-30
‘ Vent................................................................................................... page 6-2
’ Power switch.................................................................................... page 5-14
“ Horn................................................................................................ page 5-83
” Lock release lever.............................................................................. page 3-50
• Tilt and telescopic switch................................................................... page 3-50
– Hood release handle......................................................................... page 4-27
Name of Each Part
Instrument Panel Area Overview
1-4The equipment and installation position varies by vehicle
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Sit in the center of the seat and wear
seat belts properly.
Sitting too close to the side air bag
modules or placing hands on them, or
sleeping up against the door or
hanging out the windows is extremely
dangerous. The side and curtain air
bags inflate with great force and speed
directly expanding along the door on
the side the car is hit. Serious injury
could occur if someone is sitting too
close to the door or leaning against a
window, or if rear seat occupants grab
the sides of the front seatbacks. Give
the side and curtain air bags room to
work by sitting in the center of the seat
while the vehicle is moving with seat
belts worn properly.
Do not attach objects on or around
the area where air bags deploy.
Attaching objects to the air bags or
placing something in the area where
the air bags deploy is dangerous. In an
accident, an object could interfere with
air bag inflation and injure the
occupants. Furthermore, the bag could
be damaged causing gases to release.
Always keep the deployment area of
the air bag modules free of any
obstructions.
For example, you should not do any of
the following as it may interfere with
air bag deployment.
Do not put a covering on or lean
anything against areas such as the
dashboard and lower portion of the
instrument panel that blocks the
passenger front air bag and knee air
bags.
 Do not use seat covers on the front
seats and rear seats equipped with
in-seat side air bags.
 Do not hang any backpacks, bags or
pouches that cover the sides of the
seats that block the side air bags.Do not place any objects on the
assist grips. Only hang clothes
directly on the coat hooks.
Do not touch the components of the
supplemental restraint system after
the air bags have inflated.
Touching the components of the
supplemental restraint system after the
air bags have inflated is dangerous.
Immediately after inflation, they are
very hot. You could get burned.
Never install any front-end equipment
to your vehicle.
Installation of front-end equipment,
such as frontal protection bar
(kangaroo bar, bull bar, push bar, or
other similar devices), snowplow, or
winches, is dangerous. The air bag
crash sensor system could be affected.
This could cause air bags to inflate
unexpectedly, or it could prevent the
air bags from inflating during an
accident. Front occupants could be
seriously injured.
Do not modify the suspension.
Modifying the vehicle suspension is
dangerous. If the vehicle's height or
the suspension is modified, the vehicle
will be unable to accurately detect a
collision or roll-over accident resulting
in incorrect or unexpected air bag
deployment and the possibility of
serious injuries.
To prevent false detection by the air
bag sensor system, heed the
following.
 Do not use tires or wheels other than
those
specified for your Mazda:
Equipment to Protect Occupants/Pedestrians
SRS Air Bags
3-8
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04

Active driving display
NOTE
The BSM may not operate normally if
any of the following conditions is
met.
The rear side radar sensors cannot
detect an object.
Refer to Radar Sensors on page
5-131.
The road is on a steep slope.The road is extremely wide.You make a lane change 2 lanes or
more.
The BSM may operate when turning
at intersections in urban areas or
with stationary objects on the road
or the roadside (such as guardrails,
sidewalls, and parked vehicles).
If a Mazda genuine trailer hitch is
used, the BSM is automatically
turned off when the trailer's
electrical connector is connected.
When pulling a trailer other than
with a Mazda genuine trailer hitch,
or while an accessory such as a
bicycle carrier is installed to the rear
of the vehicle, turn off the BSM.
Otherwise, the radar’s radio waves
will be blocked causing the BSM to
not operate normally.
The brightness of the BSM warning
lights is linked to the panel light
control.
Refer to Dashboard Illumination on
page 5-35.
When the Vehicle Exit Warning
operates*
The Vehicle Exit Warning operates
when all of the following conditions
are met.
The vehicle is stopped.Within 3 minutes after the vehicle
power is switched OFF or the vehicle
power is switched ON.
The system detects an approaching
vehicle.
When the Vehicle Exit Warning
operates, the driver is notified of the
presence of an approaching vehicle
using the warning lights and the
instrument cluster screen display
(white)
*1.
BSM warning light
Instrument cluster
*1 The instrument cluster screen display (white)
is displayed only when the instrument
cluster is set to the i-ACTIVSENSE display.
However, when the vehicle power is OFF,
Driving
Blind Spot Monitoring (BSM)
5-148*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

the instrument cluster screen display (white)
is not displayed.

In addition, when the door in the
direction in which an approaching
vehicle is detected is opened, the
driver is notified of the danger by
flashing of the warning lights, the
warning sound, and the instrument
cluster warning indication (amber).
BSM warning light
Instrument cluster
NOTE
The Vehicle Exit Warning may not
operate normally if any of the
following conditions is met.
The rear side radar sensors cannot
detect an object.
Refer to Radar Sensors on page
5-131.
There is a parked vehicle near your
vehicle.
Moving objects are slow.The Vehicle Exit Warning is not
automatically turned off even if a
Mazda genuine trailer hitch is used.
If a trailer is towed or a bicycle
carrier is attached to the rear of the
vehicle, the radar signal may be
blocked and the Vehicle Exit Warning
may not operate correctly.
The Vehicle Exit Warning may
operate with stationary objects on
the road or the roadside (such as
guardrails, sidewalls, and parked
vehicles).
The brightness of the BSM warning
lights is linked to the panel light
control.
Refer to Dashboard Illumination on
page 5-35.
Tu r n i n g off the BSM and the Vehicle
Exit Warning
There are 2 ways to turn off the BSM
and the Vehicle Exit Warning.
Tu r n
off the BSM and the Vehicle Exit
Warning using Mazda Connect.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Tu r n off the BSM and the Vehicle Exit
Warning using the i-ACTIVSENSE
OFF switch.
Refer to How to Use the
i-ACTIVSENSE OFF switch on page
5-126.
Driving
Blind Spot Monitoring (BSM)
5-149
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

9Inspection and Servicing/Cleaning
Inspection and Servicing............ 9-2Inspection and Servicing.........9-2
Scheduled Maintenance............ 9-4 Scheduled Maintenance......... 9-4
Daily Inspection........................9-7 Daily Inspection.....................9-7
Warnings and Cautions for Daily
Inspection............................. 9-8
Engine Compartment
Inspection................................ 9-9 Checking the Inspection
Locations and Inspection
Items.................................... 9-9
Inspecting Engine Oil........... 9-13
Inspecting the Coolant......... 9-14
Inspecting the Brake Fluid..... 9-16
Replenishing Windshield Washer
Fluid................................... 9-17
Inspecting Lead-acid
Battery................................ 9-18
Replacing the Fuses.............. 9-21
Inspecting Body
Lubrication.......................... 9-22
Vehicle Exterior Inspection....... 9-23 Checking the Inspection
Locations and Inspection
Items.................................. 9-23
Replacing Windshield Wiper
Blade Rubbers..................... 9-23
Inspecting the Tires.............. 9-27Rotating the Tires................. 9-28
Replacing a Tire or a
Wheel................................. 9-29
Replacing Light Bulbs........... 9-30
Vehicle Interior Inspection....... 9-31 Checking the Inspection
Locations and Inspection
Items.................................. 9-31
Air Conditioner
Maintenance....................... 9-32
Key Inspection........................ 9-33 Warnings and Cautions about Key
Battery Replacement............ 9-33
Replacing the Key Battery..... 9-33
Exterior Maintenance.............. 9-35 Exterior Maintenance........... 9-35
Wheel Maintenance.............9-36
Interior Maintenance............... 9-37 Interior Maintenance........... 9-37
Instrument Panel Top (Soft pad)
Maintenance....................... 9-37
Upholstery and Synthetic Leather
Maintenance....................... 9-38
Leather Upholstery
Maintenance....................... 9-38
Maintenance of the Dust-proof
Sheet of the Active Driving
Display................................9-39
Seat Belt Maintenance......... 9-40
9-1
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Scheduled Maintenance
Vehicles utilizing the vehicle status monitor feature:
The vehicle status monitor feature alerts you of maintenance needs by turning on the
wrench indicator light or displaying a message in the instrument panel, or both.
Every maintenance must be done when the display/wrench indication comes on.
The display/wrench indication will come on before reaching the maximum interval
of 16,000 km (10,000 miles), or 12 mont hs (after the previous maintenance).
If you drive your vehicle under any of th e following conditions, follow the Severe
Driving Scheduled Maintenance and replace the engine oil and filter every 8,000 km
(5,000 miles) or 6 months, whichever comes first.
Otherwise, follow the Normal Driv ing Scheduled Maintenance intervals.
1. The vehicle is idled for long periods or driven at low speeds, such as with police cars, taxis, or driver's education school car.
2. The vehicle is driven mainly unpaved road.
3. The vehicle is driven mainly on mountain roads or uphill roads.
If you are following the Severe Driving Scheduled Maintenance (8,000 km (5,000
miles) or 6 months oil replacement interval), set the vehicle status monitor manually.
Refer to the Information section in the Mazda Connect Owner's Manual. Please
contact an Authorized Mazda Dealer if necessary.
USA and Canada Residents (Normal Driving Scheduled Maintenance):
Maintenance Item Number of times, maintenance was performed.
12345678
Engine oil & filter
*1RRRRRRRR
Spark plugs Replace every 120,000 km (75,000 miles).
Air filter RR
Fuel lines & hoses
*2IIII
Hoses and tubes for emission
*2II
Drive belts IIIIIIII
Exhaust system and heat shields II
Coolant level IIIIIIII
Coolant
*3
Engine Replace at first 192,000 km (120,000 miles) or 120
months; after that, every 96,000 km (60,000 miles) or 60 months.
EV system Replace at first 192,000 km (120,000 miles) or 180
months; after that, every 96,000 km (60,000 miles) or 60 months.
Brake lines, hoses and connections III I
Brake and clutch fluid level IIIIIIII
B ra ke fl uid RRRR
Inspection and Servicing/Cleaning
Scheduled Maintenance
9-4
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Interior Maintenance
WARNING
Do not spray water into the vehicle
cabin.
Spraying water into the vehicle cabin is
dangerous as electrical devices such as
the audio and switches could get wet
resulting in a malfunction or vehicle
fire.
CAUTION
Do not use polishing agents.
Depending on the product
ingredients, they could cause
discoloration, stains, cracks or
peeling of the coating.
 Do not scrape or scratch the inside
of the window glass. It could
damage the thermal filaments and
the antenna lines.
 When washing the inside of the
window glass, use a soft cloth
dampened in lukewarm water, gently
wiping the thermal filaments and the
antenna lines.
Use of glass cleaning products could
damage the thermal filaments and
the antenna lines.
 If liquid such as fragrance is spilled
on the interior, wipe it off
immediately.
 Do not use wax containing
compounds, organic solvents such as
gasoline or benzene, alcohols, acidic
or alkaline solvents, or bleach for
cleaning.
 Do not try to rub
off the shiny surface
panels and the metallic parts with a
dry cloth. Otherwise, it may cause
scratches.
Instrument Panel Top
(Soft pad) Maintenance
Dashboard maintenance for areas
requiring further cleaning.
1. Wipe the soiled area with a soft cloth soaked in a mild detergent
diluted with water.
2. Wipe off any detergent and water remaining on the surface using a
cloth soaked in water and wrung
out well.
Inspection and Servicing/Cleaning
Interior Maintenance
9-37
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04