Charging indicator
The charging indicator indicates the charging status by turning
on/flashing the light.
For the charging indicator illumination/flash pattern, refer to [Charging].
Charging port lid
The charging port lid is locked/unlocke d in conjunction with the door locking/
unlocking mechanism.
When unlocking the driver’s door, the charging port lid is unlocked. When locking
the driver’s door, the charging port lid is locked.
However, if the driver’s door is unlocked using the auxiliary key, the charging port lid
is not unlocked.
NOTE
When the driver's door is locked using an y of the following functions, the charging
port lid is also locked at the same time.
Vehicle speed sensing auto door lock functionAuto re-lock function
Charge port
The charge port is the part used for connecting to the charge connector of the
charge cable. It is used for charging.
Driving
Charging
5-115
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
How to Use the Driver
Personalization System
NOTE
In the following cases, the driver may
not be registered or recognized
correctly.
You are wearing sunglasses, a
mask, or other accessories.
There is an obstruction between
your face and the camera.
Looking forward or at the Mazda
Connect screen will facilitate driver
recognition.
If the vehicle power is switched ON
during recognition, the driver will be
recognized as a guest. If the vehicle
power is switched ON without
opening/closing the door even once,
the information of the previously
recognized driver is taken over.
If the recognition is difficult,
reprogram the data. Two types of
faces can be programmed, such as
when wearing glasses or contact
lenses.
If people with similar faces are
programmed, they may be
recognized incorrectly.
Refer to Driver Monitoring Camera
on page 5-139
Programming
1. Switch the vehicle power ON.
2. Select “Settings” from the Mazda Connect home screen.
3. Select “Driver Personalization System”.
4. Select “Add New Driver”. Operate according to the Mazda
Connect screen.
NOTE
When the door is closed and “Add
New Driver” is displayed on the
Mazda Connect home screen,
follow the instructions on the
screen.
5. (Vehicles with Ideal Driving
Position Assist)
Program the driver’s height
according to the Mazda Connect
screen.
The following items are
automatically adjusted.
Driver's seat position (Angle,
forward and back positions,
entire height, front end height)
Active driving display (Display
height)
Outer mirror angleSteering wheel position (forward
and back positions, height)
NOTE
Under the following conditions,
the Ideal Driving Position Assist is
canceled.
The switch is operated due to
the position adjustment of the
driver's seat, the steering
wheel, the outer mirrors, or the
active driving display.
The key lock button or unlock
button is operated.
The vehicle moves.
The selector lever is shifted to a
position other than P.
6. Follow the Mazda Connect screen to complete the programming.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-31
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
System Operation
When Entering the Vehicle
Sit in the driver' seat and close the
door.
Matching of the driver’s information
with the programmed information
begins.
The recognition result is displayed on
the screen.
If a confirmation message is displayed
on the Mazda Connect screen, follow
the message to complete the
operation.
The various driver’s settings that have
been programmed are automatically
restored.
NOTE
If the outer mirror angles are
adjusted close to the limits of their
range of motion, the outer mirror
angles may not be restored correctly.
When the adjustment to the stored
driving position has been completed,
a sound is not activated.
Under the following conditions, the
driving position adjustment is
canceled automatically.
The switch is operated due to the
position adjustment of the driver's
seat, the steering wheel, the outer
mirrors, or the active driving
display.
The key lock button or unlock
button is operated.
The vehicle moves.The selector lever is shifted to a
position other than P.
When Exiting the Vehicle
Unfasten the seat belt and switch the
vehicle power OFF.
The climate control setting status and
the personalization features are stored
at the time the vehicle power is
switched OFF.
(Vehicles with Entry/Exit Assist)
The seat and the steering wheel move
when all of the following conditions
are met.
The vehicle is in a programmed
driving position or in a position
where the vehicle was driven for a
certain period of time after adjusting
the driving position.
The vehicle power is switched OFF.The driver’s seat belt is unfastened.
NOTE
The climate control setting status and
the personalization features are also
stored when the drivers are switched
or when another programmed driver
is selected.
The climate control system operates
at the current setting without
restoring the stored values if any of
the following conditions occurs.
The windshield defrosting was
operating.
The ambient temperature is
significantly
different from the
previous time of entering the
vehicle.
A certain number of days have
passed since the previous time of
entering the vehicle.
If the driver's seat belt is unfastened
about 40 seconds after the vehicle
power is switched OFF, the Entry/
Exit Assist may not operate.
The Entry/Exit Assist may not operate
depending on the position of the
seat and the steering wheel.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-32
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
The amount of seat movement and
the seat and the steering wheel
movement on/off can be changed.
Refer to Settings section in the
Mazda Connect Owner's Manual or
consult an Authorized Mazda Dealer.
In the following cases, the Entry/Exit
Assist is canceled.
A switch is operated due to the
position adjustment of the driver's
seat, steering wheel, or outer
mirrors.
The key lock button or unlock
button is operated.
Editing and Deleting the
Programming Content
Switch the vehicle power ON.
Select “Settings” from the Mazda
Connect home screen.
Select “Driver Personalization System”.
Operate according to the Mazda
Connect screen.
Setting the System to Inoperable
This can be set by operating Mazda
Connect.
Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-33
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
When using the Wireless Charger
(Qi) to store items on, turn off the
Wireless Charger (Qi).
Do not place any metal object
between the charging area and the
mobile device. Also, do not apply
items such as a metallic sticker to the
Wireless Charger (Qi).
When charging, do not place any
item other than the mobile device to
be charged on the Wireless Charger
(Qi). In addition, do not place any
metal object, IC card, coin, or
magnetic item near the charging
area.
Remove dust or dirt from the
charging area before use.
Do not apply strong force or impact
to the Wireless Charger (Qi) or get it
wet.
Use only mobile devices which
support the Wireless Charger (Qi).
CAUTION
While a mobile device is placed on
the charging area, keep the vehicle
key away from the Wireless Charger
(Qi). The vehicle key may not be
detected due to radio wave
interference by the Wireless Charger
(Qi).
Charging may not operate normally
under the following conditions:
The mobile device is fully charged.
There is foreign matter between
the mobile device and the charging
area.
The temperature of the mobile
device is high.
The mobile device is placed with
the charging side facing upward.
The mobile device is placed in a
position extremely deviating from
the center of the charging area.
Your vehicle is in an area where
strong radio waves or electrical
noise occur such as near a
television tower, power plant, or
airport.
The Near Field Communication
(NFC) function setting of the
mobile device is on (depends on
the model of the mobile device).
Keep the following items away from
the charging area. Otherwise the
data stored on the mobile device
could be erased or the device could
malfunction.
Magnetic items such as magnets,
magnetic cards, and magnetic
recording media.
High precision devices such as
wristwatches.
Before using the Wireless Charger
(Qi), make sure to back up the data
stored on the mobile device. The
data on the mobile device could be
deleted.
Do not wipe the Wireless Charger
(Qi) using oil, alcohol, or thinner, or
spray hairspray or insecticide onto it.
Otherwise, it could cause damage or
cracking.
Do not leave mobile devices in the
cabin. The temperature inside the
cabin may become very hot, causing
the devices to malfunction.
Other Equipment
Wireless Charger (Qi)
7-55
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
8What to Do in Case of Emergency
In Case of Emergency................ 8-4Dealing With an Accident....... 8-4
When Towing is Required...........8-5 Having the Vehicle Towed...... 8-5
Using the Towing Hooks......... 8-6
Key Does Not Operate............... 8-8 Canceling the Key Temporary
Suspension Function.............. 8-8
Unlocking Using the Auxiliary
Key....................................... 8-8
Starting the Hybrid System with a
Dead Key Battery................... 8-9
Engine Does Not Start.............. 8-11 Taking Action with Depleted
Lead-acid Battery................. 8-11
Starting a Flooded Engine..... 8-15
Charging Is Not Possible.......... 8-16 Dealing with the Cause........ 8-16
Hybrid System Cannot be
Stopped................................. 8-17 Forcibly Stopping the Hybrid
System................................ 8-17
Problem With the Brake System (Foot
Brake)....................................8-18 Applying the Emergency
Brake.................................. 8-18AUTOHOLD Cannot be
Canceled............................... 8-19Forcibly Canceling the
AUTOHOLD........................ 8-19
Overheating........................... 8-20 Ta k i n g A c t i o n w i t h
Overheating........................ 8-20
Tire is Punctured or Bursts........ 8-22 Changing a Flat Tire (With Spare
Tire).................................... 8-22
Liftgate Cannot Open.............. 8-30 Open the liftgate from the
luggage compartment.......... 8-30
The Power Windows Cannot Be
Operated............................... 8-31 Initializing the Power
Window.............................. 8-31
The Panorama Sunroof Cannot Be
Operated............................... 8-32 Initializing the Panorama
Sunroof............................... 8-32
The Moonroof Cannot Be
Operated............................... 8-33 Initializing the Moonroof...... 8-33
8-1
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Windshield Wipers Operate at High
Speed.................................... 8-34Have the Vehicle Inspected ..........
.......................................... 8-34
Washer Fluid Does Not Spray ...........
............................................ 8-35 Inspecting Washer Fluid
Level................................... 8-35
Active Driving Display Does Not
Operate................................. 8-36 Active Driving Display Does Not
Operate.............................. 8-36
Warning/Indicator Light Turns
On........................................ 8-37 Warning Lights..................... 8-37
Brake System Warning
Light................................... 8-37
Lead-Acid Battery Charging
System Warning Light........... 8-38
Hybrid System Warning
Light................................... 8-39
Remaining High Voltage Battery
Power Warning Light............ 8-39
Charging System Warning
Light................................... 8-40
Output Restriction Warning
Light................................... 8-40
Engine Oil Warning Light...... 8-41
High Engine Coolant Temperature
Warning Light...................... 8-41
Electric Power Steering Warning
Light................................... 8-42
Shift System Warning Light ...........
.......................................... 8-42
ABS Warning Light................8-43
Master Warning Light........... 8-43Brake Control System Warning
Light................................... 8-44
Electric Parking Brake (EPB)
Indicator Light..................... 8-44
Check Engine Warning
Light................................... 8-45
Automatic Transmission Warning
Light................................... 8-45
AWD Warning Light............. 8-46
Tire Pressure Monitoring System
(TPMS) Warning Light
(Flashing)............................ 8-46
TCS/DSC Indicator Light (Turns
on)..................................... 8-47
Air Bag/Seat Belt Pretensioner
System Warning Light........... 8-47
KEY Warning Light (Red)....... 8-48
Security Indicator Light......... 8-48
High Beam Control System (HBC)
Warning Light (Amber)
*........ 8-49
i-ACTIVSENSE Warning
Light................................... 8-49
Exterior Lights Warning
Light................................... 8-50
Low Fuel Warning Light.........8-50
Check Fuel Cap Warning
Light................................... 8-51
Engine Oil Level Warning
Light................................... 8-51
Seat Belt Warning Light (Front
Seat)................................... 8-52
Seat Belt Warning Light (Rear
Seat) (Red).......................... 8-52
Rear Seat Alert Warning Light
*......
.......................................... 8-53
Low Washer Fluid Amount
Warning Light
*..................... 8-53
Door-ajar Warning Light/Liftgate-
open Warning Light/Hood-open
Warning Light...................... 8-54
8-2*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
KEY Indicator Light (Green)
(Flashing)............................ 8-54
Wrench Indicator Light......... 8-55
Warning Sound is Activated...... 8-56 Lights-On Reminder............. 8-56
Ve h i c l e Po w e r N o t S w i t c h e d O F F
Reminder Warning Sound.....8-56
Key Removed from Vehicle
Warning Sound.................... 8-57
Key Left-in-Vehicle Warning
Sound................................. 8-57
Key Left-In-Luggage
Compartment Warning Sound
(Vehicles With Advanced Keyless
Function)............................ 8-58
Door Lock Inoperable Warning
Sound................................. 8-58
Power Liftgate Warning Sound
*.....
.......................................... 8-59
Brake System Warning
Sound................................. 8-59
Brake Override Warning
Sound................................. 8-60
Electric Parking Brake (EPB)
Warning Sound.................... 8-60
Vehicle Problem Warning
Sound................................. 8-61
Shift Position Warning
Sound................................. 8-61
Selector Lever Not in P Reminder
Warning Sound.................... 8-62
Reverse Position Warning
Sound................................. 8-62
Door-Ajar Warning Sound ...........
.......................................... 8-63
Battery Saving Mode Warning
Sound................................. 8-63
If the Vehicle Becomes Stuck.... 8-64 What to do when the vehicle is
stuck................................... 8-64
*Some models.8-3
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04