2024 MAZDA CX90 fuel

If an Accident Occurs
Heed the following cautions to prevent serious injury such as electric shock, or in the
worst case death.
WARNING
Do not continue to drive the vehicle.
To prevent further accidents, stop the vehicle in a safe place, shift the selector lever
to the P position, and then apply the parking brake to stop the hybrid system.
Never touch electrical wiring that may be protruding into or outside of the cabin.
Otherwise, it could result in electrical shock and serious injury.
Never touch any area where electrolyte is visible or electrolyte is leaking from the
area.
If electrolyte from the high voltage battery gets in the eyes or on the skin, it could
cause loss of vision or skin reactions. If electrolyte comes into contact with the eyes,
do not rub them, and after flushing with water for 15 minutes or longer, seek
medical attention immediately. In addition, if electrolyte comes into contact with
the skin, wash the areas with soap and wate r thoroughly. If you feel any abnormality
in your body, seek medical attention immediately.
Never approach objects that are on fire or extremely hot.
Electrolyte in the high voltage battery may cause a fire. If the vehicle catches fire,
extinguish the fire using a fire extinguisher (type ABC, BC, or C). Only extinguish a
fire with water when a large amount of water is available such as from a fire hydrant.
Using a small amount of water may cause the fire to spread.
Do not tow the vehicle with the front wheels or the rear wheels grounded.
Otherwise, the motor generates electricity which may cause a fire depending on the
condition of the damage. When towing the vehicle, tow it with all 4 wheels off the
ground.
Do not start the hybrid system if there is liquid leaking from the vehicle (other than
air conditioner water).
If liquid leakage (other than air conditioner water) is found on the road surface
under the vehicle, the fuel system may be damaged. Starting the hybrid system in
this condition, may cause a fire. Do not start the hybrid system and contact an
Authorized Mazda Dealer.
Scrapping Your Vehicle and Disposing of High Voltage Battery
The high voltage battery is collected to prevent accidents involving it. When
scrapping your vehicle, replacing the high voltage battery, or disposing of the high
voltage battery, consult an Authorized Mazda Dealer. Please cooperate in ensuring
that the vehicle's high voltage battery is collected.
Driving
e-SKYACTIV PHEV
5-21
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

WARNING
Appropriate disposal of the high voltage battery.
If the high voltage battery is not collected and disposed of appropriately, such as by
leaving it unattended or illegally abando ning it, some other person may touch it
which could cause electrocution leading to serious injury.
Fuel
CAUTION
 The e-SKYACTIV PHEV can be driven on electricity, but depending on the driving
conditions and mode, the vehicle will be driven using the engine and will need to
be refueled. Check the remaining amount of fuel and replenish the fuel if
necessary.
Refer to How to Use the Mazda intelligent Drive Select (Mi-Drive) on page 5-96.
 Depending on the vehicle usage conditions, fuel may remain in the tank for a long
period of time and the quality of the fuel may change. Refuel at least 25 L of fuel
every 12 months (total amount of refueling for 12 months is at least 25 L), as this
may affect parts of the fuel system and the engine.
 If the fuel has not been replenished for a certain period of time and the quality of
the fuel in the fuel tank is expected to change, a message is displayed in the
instrument cluster when the hybrid system is started. When a certain amount of
fuel is consumed, the message displayed in the instrument cluster is no longer
displayed.
Driving
e-SKYACTIV PHEV
5-22
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the
e-SKYACTIV PHEV
Switching the Drive Mode
You can switch the drive mode of the
hybrid system by operating the switch.
TOWING mode/SPORT mode/
NORMAL mode/EV mode/
OFF-ROAD mode
Refer to How to Use the Mazda
intelligent Drive Select (Mi-Drive) on
page 5-96.
CHARGE Mode
The engine is used as a generator, and
the vehicle is driven while charging the
high voltage battery.
1. Start the hybrid system.
2.
When CHARGE mode is activated, the
CHARGE mode indicator light
in
the instrument cluster turns on.
Power is generated to the preset target
charge amount, and when the target
charge amount is reached, power is
generated to maintain it.
NOTE
Switching to CHARGE mode may not
be possible depending on the
conditions of the hybrid system.
When power consumption is high
due to the vehicle driving conditions,
outside air temperature, or when the
air conditioner is used, charging may
take longer than usual or may not
occur.
When the vehicle is driven while in
CHARGE mode, the engine operates
to generate electricity, therefore fuel
consumption may increase
compared to when driving the
vehicle in a mode other than
CHARGE mode.
If the vehicle power is switched OFF
while switching the mode to
CHARGE mode, the CHARGE mode
will be canceled the next time the
vehicle power is switched ON.
When pressing the charge mode
switch while the Mazda intelligent
Drive Select (Mi-Drive) is in EV
mode, the Mi-Drive switches to
NORMAL mode and the vehicle is
driven in CHARGE mode.
The mode may not be able to switch
to CHARGE mode when the fuel is
low.
The target charge amount can be
changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Po we r Me te r
Displays in the instrument cluster while
driving in NORMAL mode or EV mode.
Driving
e-SKYACTIV PHEV
5-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe e-SKYACTIV PHEV
Switch to Start in EV Mode
The hybrid system can be changed to
start in EV mode.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Switching the Regenerative Braking
Strength
The regenerative braking strength can
be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
For Eco-Friendly and Economical
Driving
Using the Drive Mode
EV mode is mainly used in urban areas,
while NORMAL mode is used in
suburban areas and on expressways,
which leads to savings in electricity and
fuel consumption.
By actively using regenerative braking
to charge the high voltage battery, it is
possible to increase the EV travel
distance and to reduce fuel
consumption when driving the vehicle
in a mode other than EV mode.
To extend cruising distance
The electrical power consumption
while driving can be reduced and the
cruising distance can be extended by
doing the following operations.
With the charge connector
connected, turn on the climate
control system to provide a
comfortable temperature in the
cabin before driving.
When driving during cold
temperatures, use the seat warmer or
steering warmer instead of the
climate control system.
Adjust the climate control system to
a moderate airflow and temperature
setting.
Refrain from using the defogger
under conditions other than when a
window is fogged or frozen.
By maintaining a sufficient distance
between vehicles and using the
regenerative braking well, more
electrical power can be charged to
the high voltage battery.
To extend the life of the high voltage
battery
The high voltage battery life changes
depending on the vehicle storage
conditions or charging method.
To extend the life of the high voltage
battery, be careful of the following.
(Charging the battery)
Avoid unnecessary, frequent
charging.
Only charge the battery with as much
power as needed, and do not always
fully charge the battery. The
maximum charge limit can be set.
Refer to Convenient Ways to Use of
Charging on page 5-118.
(Parking the vehicle)
Do not park the vehicle in a place
where the ambient temperature is
extremely high or low.
Do not leave the vehicle while the
remaining high voltage battery power
is extremely low.
If the [Battery Cooling] operation notification is displayed on the
center display after driving the
vehicle, select [Activate].
Driving
e-SKYACTIV PHEV
5-25
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Instrument Cluster
The screen display informs you of the vehicle information.
ƒDisplays the power meter and the tachometer.
The display
differs depending on the drive mode.
„ Displays the speedometer and vehicle information using messages.
Changes depending on the drive mo de and the system being used.
… Displays the high voltage battery power gauge and the fuel gauge.
The display is changed using the INFO switch.
† Displays the ambient temperature/odo meter/trip meter, maximum driving
distance, and vehicle information using messages.
Driving
Instrument Cluster
5-27
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Average fuel economy display
Instantaneous electrical power consumption rate display
Instantaneous fuel economy display
3. High voltage battery temperature gauge Engine coolant temperature gauge
4. i-ACTIVSENSE status symbol (Warning/Risk avoidance support system)
5. Compass display
6. Message display
*1
*1 Displayed only when a warning occurs.
The screen will switch automatically when some i-ACTIVSENSE systems are used.
Driving
Instrument Cluster
5-30
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Fuel Gauge
The fuel gauge shows approximately
how much fuel is remaining in the tank
when the vehicle power is switched
ON.
When the fuel tank is full, F (Full) is
indicated, and as the level lowers the
needle approaches E (Empty).

NOTE
After refueling , it may require some
time for the indicator to stabilize. In
addition, the indicator may deviate
while driving on a slope or curve
since the fuel moves in the tank.
The direction of the arrow
indicates that the fuel-filler lid is on
the left side of the vehicle.
Dashboard Illumination
When the lights are turned on with the
vehicle power switched ON, the
brightness of the dashboard
illumination is dimmed. However,
when the light sensor detects that the
surrounding area is bright such as
when the lights are turned on in the
daytime, the dashboard illumination
does not dim.
NOTE
When the vehicle power is switched
ON in the early evening or at dusk, the
dashboard illumination is dimmed for
several seconds until the light sensor
detects the brightness of the
surrounding area, however, the
dimming may cancel after the
brightness is detected.
Driving
Instrument Cluster
5-35
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Outside TemperatureDisplay
When the vehicle power is switched
ON, the outside temperature is
displayed.

NOTE
The outside temperature display may
differ from the actual outside
temperature depending on the
surroundings and vehicle conditions.
Maximum Driving
Distance Display
The maximum driving distance is
calculated and displayed based on the
current remaining charge of the high
voltage battery/fuel tank level and the
electrical power consumption rate/
fuel economy. When the maximum
driving distance is 50 km (30 miles) or
farther, the maximum driving distance
indication decreases in 10 km (10
mile) increments, and when the
maximum driving distance is 50 km
(30 miles) or shorter, it decreases in 1
km (1 mile) increments.
1. Remaining distance-to-full discharge display for high voltage
battery only
2. Maximum driving distance display for fuel and high voltage battery
NOTE
The maximum driving distance is just
an approximate numerical value and
differs from the actual driving distance.
Drive the vehicle while checking the
high voltage battery power gauge/fuel
gauge.
Driving
Instrument Cluster
5-37
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04