2024 MAZDA CX90 parking brake

The shift indicator turns on at the
same position as the shift position
displayed in the instrument cluster.
1. Selector lever button
2. Shift indicator
The shift position is displayed in the
instrument cluster.
In the following cases, the shift
position is displayed in the
instrument cluster even if the
vehicle power is in a position other
than ON.
The AUTO P (parking lock)
function is operating.
Neutral hold mode is operating.
When the shift position and the
selector lever position differ, the
shift position and the selector lever
position are displayed.
1. Selector lever position
2. Shift position
NOTE
If the selector lever cannot be shifted
from the P position, the lead-acid
battery could be depleted.
When the selector lever is shifted
from the N position to the D/R
position without depressing the
brake pedal, the shift position and
the selector lever position differ,
however, the shift guide indication is
not displayed.
When the vehicle power is switched
from ON to ACC or OFF, the shift
guide indication displayed after
operating the AUTO P (parking lock)
function turns on for a certain period
of time and then it turns off.
Driving
Selector Lever
5-48
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Operating the AUTO P (Parking Lock)
Function
Meet the following conditions while
the vehicle is stopped.
Switch the vehicle power from ON to
OFF.
Unfasten the driver’s seat belt and
open the driver’s door while the shift
position is in the D/R position.
The AUTO P (parking lock) function
operates and the shift position
automatically changes to P.
NOTE
When the AUTO P (parking lock)
function operates, only the
transmission shift position changes to
the P position automatically. The shift
position indication in the instrument
cluster will differ from the selector
lever position because the selector
lever position does not change. Check
the shift position indication in the
instrument cluster and shift the
selector lever to the P position.
Using Neutral Hold Mode
When in neutral hold mode, a
condition is maintained for about 25
minutes in which the vehicle power is
switched to ACC, the shift position is
in the N position, and the parking
brake is released. Use this mode when
it is necessary to release the parking
brake and change the shift position to
the N position, such as in an automatic
car wash that moves the vehicle by
placing the front and rear tires on one
side of the vehicle on a belt conveyor.
Neutral Hold Mode activation method
1
1. Start the hybrid system.
2. Release the parking brake.
3. Shift the selector lever to the N position.
4. Turn off the AUTOHOLD.
5. Press the electric parking brake (EPB) switch continuously until a
sound is activated.
6. Press the power switch immediately after the sound is activated.
Neutral hold mode operates.
Neutral Hold Mode activation method
2
1. Start the hybrid system.
2. Release the parking brake.
3. Shift the selector lever to the N position.
4. Turn off the AUTOHOLD.
5. Press the power switch while pressing the electric parking brake
(EPB) switch.
Neutral hold mode operates.
Canceling Neutral Hold Mode
If any of the following operations is
performed, neutral hold mode is
canceled.
Switch the vehicle power ON.Shift the selector lever to the P
position.
NOTE
Neutral hold mode is canceled
automatically after about 25 minutes
have passed since it was operated, and
the vehicle power is switched OFF. At
this time, the AUTO P (parking lock)
function operates and the shift
position changes to the P position.
Driving
Selector Lever
5-49
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Electric Parking Brake(EPB)
The EPB system applies the parking
brake using a motor.
NOTE
If the parking brake is applied with the
vehicle power switched to OFF or
ACC, the EPB indicator light
in the
instrument cluster and the indicator
light in the switch may turn on for a
certain period of time.
Warning and Cautions for
Using the Electric Parking Brake (EPB)
WARNING
Do not drive the vehicle with the
parking brake applied.
If the vehicle is driven with the parking
brake applied, the brake parts may
generate heat and the brake system
may not operate, leading to an
accident. Before driving the vehicle,
release the parking brake and make
sure that the EPB indicator light
in
the instrument cluster turns off.
Apply the parking brake when leaving
the vehicle.
Not applying the parking brake when
parking the vehicle is dangerous as the
vehicle may move unexpectedly and
result in an accident. Before leaving the
vehicle, apply the parking brake and
make sure that the EPB indicator light
in the instrument cluster turns on.
CAUTION
 Depress the brake pedal firmly
before doing a shift operation as the
vehicle may start moving
unexpectedly.
 If something such as the driver's foot
contacts the accelerator pedal while
the hybrid system is operating and
the parking brake is applied, the
parking brake may be released
automatically and the vehicle may
move unexpectedly. If you do not
intend to start driving the vehicle
immediately, shift the selector lever
to the P or N position.
Driving
Electric Parking Brake (EPB)
5-57
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the ElectricParking Brake (EPB)
Applying the Parking Brake Manually
1. Depress the brake pedal.
2.
The parking brake is applied and
the EPB indicator light
in the
instrument cluster and the EPB
switch indicator light turn on.
Releasing the Parking Brake Manually
1. Depress the brake pedal with the vehicle power switched ON or the
hybrid system operating.
2.
When the parking brake is released,
the EPB indicator light
in the
instrument cluster and the EPB
switch indicator light turn off.
NOTE
To release the parking brake when
the vehicle power is switched OFF, it
is necessary to cancel the parking
brake auto operation. If the parking
brake is likely to freeze such as
during cold weather conditions,
cancel the parking brake auto
operation.
When the charging system warning
light in the instrument cluster turns
on, the parking brake cannot be
applied after the vehicle power is
switched OFF. Before switching the
vehicle power OFF, apply the parking
brake manually.
Applying the Parking Brake
Automatically
Switch the vehicle power from ON to
ACC or OFF.
The parking brake is applied and the
EPB indicator light
in the
instrument cluster and the EPB switch
indicator light turn on.
Releasing the Parking Brake
Automatically
Shift-linked release
Shift the selector lever from the P
position to a position other than P
when all of the following conditions
are met.
Hybrid system is operating.Driver’s door is closed.Brake pedal is firmly depressed.
When the parking brake is released,
the EPB indicator light
in the
instrument cluster and the EPB switch
indicator light turn off.
Driving
Electric Parking Brake (EPB)
5-58
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Accelerator-linked release
Depress the accelerator pedal when all
of the following conditions are met.
Hybrid system is operating.Driver’s door is closed.Driver's seat belt is fastened.The selector lever is in the D or R
position.
When the parking brake is released,
the EPB indicator light
in the
instrument cluster and the EPB switch
indicator light turn off.
Convenient Ways to Use
the Electric Parking Brake (EPB)
Enabling/Disabling Shift-Linked
Release
1. Switch the vehicle power ON.
2. Make sure that the parking brake is
applied (EPB indicator light
is
turned on).
3. Continue pulling the EPB switch for 4 seconds or longer.
4. Release the EPB switch once.
5. Immediately continue pulling theEPB switch for 4 seconds or longer.
When the shift-linked release is
enabled, a sound is activated 2
times, the EPB switch indicator light
switches to fast flashing, and then
flashes for a certain period of time.
When the shift-linked release is
disabled, a sound is activated 1
time, the EPB switch indicator light
switches to slow flashing, and then
flashes for a certain period of time.
Driving
Electric Parking Brake (EPB)
5-59
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Canceling the Parking Brake
Automatic Operation
The parking brake automatic operation
returns to automatic operation when
the vehicle power is switched ON.
When canceling the parking brake
automatic operation and parking the
vehicle, shift the selector lever to the P
position and use wheel blocks on the
tires. If one of the following operations
is performed, the parking brake
automatic operation can be canceled
when the vehicle power is switched
from ON to OFF.
Operation method 1
1. Switch the vehicle power ON.
2. Release the parking brake manually.
3. Turn off the AUTOHOLD.
4. Press the EPB switch continuouslyuntil a sound is activated.
5. Release the EPB switch.
6. Switch the vehicle power OFFimmediately after a sound is
activated.
After the parking brake auto
operation is canceled, a warning
sound is activated one time, and
the EPB switch indicator light
switches from illumination to
flashing , and then turns off after a
certain period of time has passed.
Operation method 2
1. Switch the vehicle power ON.
2. Release the parking brake manually.
3. Turn off the AUTOHOLD.
4. With the EPB switch pressed, switch
the vehicle power OFF without
depressing the brake pedal.
After the parking brake auto
operation is canceled, a warning
sound is activated one time, and
the EPB switch indicator light
switches from illumination to
flashing, and then turns off after a
certain period of time has passed.
NOTE
The auto operation may not cancel if
the vehicle is parked on a steep
slope.
When using an automatic car wash
which moves the vehicle with the
front tires mounted, it is necessary to
cancel the parking brake automatic
operation.
Driving
Electric Parking Brake (EPB)
5-60
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Immediately depress the brake pedal
in the following case.
Because the AUTOHOLD function is
canceled forcibly, the vehicle may
move unexpectedly and result in an
accident.
The message “Depress Brake Pedal.
Brake Hold Disabled” is displayed on
the instrument cluster and the
warning sound is activated at the
same time.
When parking and before leaving the
vehicle, apply the parking brake.
Otherwise, the vehicle may move
unexpectedly and result in an accident.
When parking and before leaving the
vehicle, shift the selector lever to the P
position and apply the parking brake.
CAUTION
If you stop operating the accelerator
pedal before the vehicle starts driving ,
the force holding the vehicle in the
stopped position may weaken. Firmly
depress the brake pedal or depress the
accelerator pedal to start driving the
vehicle.
How to Use the AUTOHOLD
Operating the AUTOHOLD
The AUTOHOLD becomes operational
and the AUTOHOLD standby indicator
light turns on.
Using the AUTOHOLD
1. Stop the vehicle. When all of the following
conditions are met, the
AUTOHOLD operates and the
AUTOHOLD active indicator light
in the instrument cluster
turns on.
The hybrid system is operating.The driver’s seat belt is fastened.The driver’s door is closed.The parking brake is released.
2. Start driving the vehicle. The brakes are released and the
AUTOHOLD active indicator light
in the instrument cluster
turns off.
NOTE
When about 10 minutes or longer
have passed since the AUTOHOLD
operated, the parking brake is
applied automatically. When the
parking brake is released, the
AUTOHOLD operates again.
Driving
AUTOHOLD
5-64
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

When the vehicle power is switched
OFF while the AUTOHOLD is
operating , the parking brake is
applied automatically.
If the selector lever is shifted to the R
position with the vehicle tilted
rearward or on level ground, the
AUTOHOLD is canceled. Operate
the brakes if necessary.
Under the following conditions, the
parking brake is automatically
applied and the AUTOHOLD is
released. The AUTOHOLD is
re-enabled when the conditions
before the AUTOHOLD is released
are restored.
The driver’s seat belt is unfastened.The driver’s door is opened.
Canceling the AUTOHOLD Operation
1. Depress the brake pedal with the AUTOHOLD operating.
2.
The AUTOHOLD operation is
canceled and the AUTOHOLD
standby indicator light turns off.
NOTE
The AUTOHOLD can be turned off
by pressing the AUTOHOLD switch
while driving.
When the vehicle power is switched
OFF while the AUTOHOLD is
operating , the parking brake is
applied automatically and the
AUTOHOLD is turned off.
Driving
AUTOHOLD
5-65
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04