2024 MAZDA CX90 sensor

To w i n g
Your Mazda was designed and built
primarily to carry passengers and
cargo.
If you tow a trailer, follow these
instructions because driver and
passenger safety depends on proper
equipment and safe driving habits.
Towing a trailer will affect handling,
braking , durability, performance, and
economy.
Never overload vehicle or trailer.
Consult an Authorized Mazda Dealer if
you need further details.
NOTE
Your vehicle is equipped with a
Trailer Stability Control (TSC)
mechanism, which enhances vehicle
stability when towing a trailer.
Refer to Trailer Stability Control
(TSC) on page 5-90.
When towing a trailer, do not use the
following safety systems (If a Mazda
genuine trailer hitch is used, these
systems are automatically turned off
when the trailer's electrical
connector is connected):
Blind Spot Monitoring (BSM)Rear Cross Traffic Alert (RCTA)Smart Brake Support (SBS) reverse
drive detection
Parking Sensor System (Rear)Emergency Lane Keeping (ELK)
Blind Spot Assist
Emergency Lane Keeping (ELK)
Head-on traffic avoidance assist
Turn off the aforementioned safety
systems when towing a trailer
without a genuine Mazda trailer
hitch.
Your vehicle is equipped with a
Mazda intelligent Drive Select
(Mi-Drive) towing mode which
enhances vehicle stability when
towing a trailer.
Refer to Mazda intelligent Drive
Select (Mi-Drive) on page 5-96.
Other Equipment
Towing (U.S.A. and Canada)
7-59
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Seat Belt Warning Light(Front Seat)
The warning light flashes for about 6
seconds if the driver or front
passenger's seat is occupied and the
seat belt is not fastened with the
vehicle power switched ON.
If the driver or front passenger's seat
belt is unfastened (only when the front
passenger's seat is occupied) and if the
vehicle is driven at about 20 km/h (12
mph) or faster, or about 10 km/h (6
mph) or faster for a continuous 30
seconds, with the seat belt unfastened,
the warning light flashes for a certain
period.
After a short time, the warning light
stops flashing, but remains illuminated.
In addition, when the warning light
flashes, a warning sound is activated.
Wear the seat belt.

NOTE
Placing heavy items on the front
passenger's seat may cause the front
passenger's seat belt warning
function to operate depending on
the weight of the item.
To allow the sensor that detects an
occupant to function properly, do
not sit on the front passenger's seat
with a cushion or other object on it.
The sensor may not function properly
because the additional seat cushion
could cause sensor interference.
If a small child is seated on the front
passenger's seat, the warning light
may not operate.
Seat Belt Warning Light(Rear Seat) (Red)
When the vehicle power is switched
ON, the warning lights turn on if the
seat belts are not fastened.
*1*2
After the hybrid system is started, the
warning lights turn off after a short
period of time.
In addition, if a fastened seat belt is
unfastened, the warning light flashes
for a short period of time and then
turns off.
When the warning light flashes, a
warning sound is activated.
Wear the seat belt.

*1 The warning light also turns on when the rear seat is unoccupied.
*2 The number of seats displayed onthe warning light differs depending
on the specification.
What to Do in Case of Emergency
Warning/Indicator Light Turns On
8-52
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Key Left-In-Luggage
Compartment Warning Sound (Vehicles With
Advanced Keyless Function)
If the key is left in the luggage
compartment with all the doors locked
and the liftgate closed, a beep will be
heard outside for about 10 seconds to
notify the driver that the key is in the
luggage compartment. In this case,
take out the key by pressing the electric
liftgate opener and opening the
liftgate.
The key taken out of the luggage
compartment may not operate
because its functions have been
temporarily stopped. To restore the
key's functions, perform the applicable
procedure (page 8-8).
Door Lock InoperableWarning Sound
Operation Using Touch Sensor
A warning beep is activated to notify
the driver that the doors are not locked
when all of the following conditions
are met:
The vehicle power is switched OFF.All the doors are not fully closed.The lock is operated 3 times within 5
seconds.
Check the vehicle power and whether
the doors are open or closed, and then
operate the lock again.
Operation Using Door-lock Switch on
the Liftgate
When the door-lock switch on the
liftgate is pressed under any of the
following conditions, a warning sound
is activated.
The vehicle power is switched to a
position other than OFF.
Any door is open.
Make sure that none of the above
conditions are present, and then press
the door-lock switch again.
What to Do in Case of Emergency
Warning Sound is Activated
8-58
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Checking the Inspection
Locations and Inspection Items
Front
Rear
1. Windshield wipers
2. Tires
3. Light bulbs
Replacing Windshield
Wiper Blade Rubbers
CAUTION
 Hot waxes applied by automatic car
washers have been known to
affect
the wiper's ability to clean windows.
 An operation malfunction may occur
or the wiper
effectiveness may be
reduced if a water-repellent coating
is used.
 To prevent damage to the wiper
blades, do not use gasoline,
kerosene, paint thinner, or other
solvents on or near them.
 When the wiper lever is in the AUTO
position and the vehicle power is
switched ON, the wipers may move
automatically in the following cases:
 If the windshield above the rain
sensor is touched.
 If the windshield above the rain
sensor is wiped with a cloth.
 If the windshield is struck with a
hand or other object.
 If the rain sensor is struck with a
hand or other object from inside
the vehicle.
Be careful not to pinch hands or fingers as it may cause injury, or
damage the wipers. When washing
or servicing the vehicle, make sure
the wiper lever is in the OFF
position.
 Before lifting the windshield wiper
blades
off the windshield, always
follow the procedure for moving the
windshield wiper blades. Otherwise,
a wiper blade, wiper arm, or the
hood could be damaged.
Inspection and Servicing/Cleaning
Vehicle Exterior Inspection
9-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Exterior Maintenance
WARNING
Dry off brakes that have become wet
by driving slowly, releasing the
accelerator pedal and lightly applying
the brakes several times until the
brake performance returns to normal.
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been
affected.
CAUTION
Before lifting the windshield wiper
blades off the windshield, always
follow the procedure for moving the
windshield wiper blades. Otherwise,
a wiper blade, wiper arm, or the
hood could be damaged.
Refer to the Replacing Windshield
Wiper Blade Rubbers section (page
9-23) for the procedure on how to
move the windshield wiper blades to
the service position.
 When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, the windshield
wipers may operate automatically in
the following cases:
The area of the windshield above the
rain sensor is touched or wiped with
a cloth.
The windshield or the rain sensor
area in the cabin is hit.
When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, do not touch the
windshield or the windshield wipers
Otherwise, the windshield wipers
will operate automatically which
could catch your fingers or damage
the windshield wipers.
When removing ice or snow, or
cleaning the windshield, always
make sure the wiper lever is in the
OFF position.
 Do not spray water in the engine
compartment. Otherwise, it could
result in engine-starting problems or
damage to electrical parts.
 When washing and waxing the
vehicle, be careful not to apply
excessive force to any single area of
the vehicle roof. Otherwise, you
could dent the vehicle.
 Make sure that the fuel-filler lid is
closed and lock the doors.
Otherwise, the fuel-filler lid may be
forcefully opened by water pressure
causing damage to the vehicle or
fuel-filler lid.
 (Vehicles with hands-free liftgate)
When washing or waxing the vehicle,
turn off the hands-free liftgate using
the Mazda Connect or do not bring
the transmitter into the area around
the liftgate. Otherwise, the liftgate
could open unexpectedly resulting in
an accident. Refer to Power Liftgate
section (page 4-21).
 Do not use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or
anodized aluminum parts. This may
damage the protective coating; also,
cleaners and detergents may discolor
or deteriorate the paint.
Inspection and Servicing/Cleaning
Exterior Maintenance
9-35
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Cell Phones.......................... 10-26Cell Phones Warning.......... 10-26
Uniform Tire Quality Grading System
(UTQGS).............................. 10-27 Uniform Tire Quality Grading
System (UTQGS)................ 10-27
Tread Wear........................ 10-27
Traction-AA, A, B, C........... 10-28
Temperature-A, B, C.......... 10-28
UNIFORM TIRE QUALITY
GRADING......................... 10-29
Tire Information (U.S.A.)........ 10-30 Tire Labeling...................... 10-30
Information on Passenger Vehicle
Tires.................................. 10-30
Information on Temporary
Tires.................................. 10-33
Location of the Tire Label
(Placard)........................... 10-34
Recommended Tire Inflation
Pressure............................ 10-34
Checking Tire Pressure........10-35
Glossary of Terms............... 10-36
Tire Maintenance............... 10-37
Tire Inflation Pressure......... 10-37
Tire Rotation...................... 10-38
Replacing a Tire................. 10-38
Safety Practices.................. 10-39
Vehicle Loading................. 10-40
Steps for Determining the Correct
Load Limit......................... 10-45
Declaration of Conformity..... 10-46 Keyless Entry System/Immobilizer
System.............................. 10-46
HomeLink Wireless Control
System.............................. 10-47Charging........................... 10-48
Tire Pressure Monitoring
System.............................. 10-49
Front Radar Sensor System ...........
........................................ 10-50
Front Side Radar Sensor System/
Rear Side Radar Sensor
System.............................. 10-51
Audio System.................... 10-52
Radio System..................... 10-54
Data Communication
System.............................. 10-55
Wireless Charger (Qi)......... 10-58
Identification Numbers.......... 10-59 Ve h i c l e I d e n t i fi c a t i o n
Number............................ 10-59
Motor Vehicle Safety Standard
Label.................................10-59
Chassis Number................ 10-60
Vehicle Emission Control
Information Label.............. 10-60
Tire Pressure Label..............10-61
Engine Number..................10-61
Vehicle Specification............. 10-62 Engine...............................10-62
Charge System................... 10-63
High Voltage Battery...........10-64
Electrical System................ 10-65
Lubricant Quality............... 10-66
Capacities......................... 10-67
Dimensions....................... 10-68
Weights.............................10-69
Light Bulbs.........................10-70
Tires.................................. 10-71
10-2
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Front Radar Sensor System
Specifications/Customer Information and Reporting Safety Defects
Declaration of Conformity
10-50
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

Front Side Radar Sensor System/Rear Side RadarSensor System
Specifications/Customer Information and Reporting Safety Defects
Declaration of Conformity
10-51
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04